Arctic Freezer 36 CO
₹7,626.27 Original price was: ₹7,626.27.₹5,296.61Current price is: ₹5,296.61.

- CONTACT FRAME FOR INTEL LGA1851 AND LGA1700: Improved contact pressure distribution through Intel mounting frame for efficient heat transfer thanks to even CPU contact surface
- HIGH-PERFORMANCE FOR HIGH-END CPUs: With its 4 offset heat pipes, the single-tower cooler enables fast heat transfer to the heat sink. There, the heat is efficiently dissipated by pressure-optimised 120 mm fans.
- INNOVATIVE FAN MOUNTING: Innovative click installation system makes it easier to install the cooler or replace the fans. The Freezer 36 is compatible with most 120 mm fans
- SIDE-FLOW HEAT SINK: By opening the fins on the side, the pull fan draws additional cool air out of the case through the heat sink, optimises ventilation and increases cooling efficiency
Available on backorder
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
Arctic Freezer 36 CO
About this item
- CONTACT FRAME FOR INTEL LGA1851 AND LGA1700: Improved contact pressure distribution through Intel mounting frame for efficient heat transfer thanks to even CPU contact surface
- HIGH-PERFORMANCE FOR HIGH-END CPUs: With its 4 offset heat pipes, the single-tower cooler enables fast heat transfer to the heat sink. There, the heat is efficiently dissipated by pressure-optimised 120 mm fans.
- INNOVATIVE FAN MOUNTING: Innovative click installation system makes it easier to install the cooler or replace the fans. The Freezer 36 is compatible with most 120 mm fans
- SIDE-FLOW HEAT SINK: By opening the fins on the side, the pull fan draws additional cool air out of the case through the heat sink, optimises ventilation and increases cooling efficiency
- Standard : ACFRE00121A| GTIN / EAN: 4895213704120 | UPC: 840033401937
- Black : ACFRE00123A|Â GTINÂ /Â EAN: 4895213704144 | UPC: 840033401951
- CO : ACFRE00122A| GTIN / EAN: 4895213704137 | UPC: 840033401944
High-Class Finish with Aluminium Top Plate
With its push-pull configuration, the Freezer 36 not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.
Future-Proof Compatibility
The Freezer 36 is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don’t need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.
Improved Fan Mounting
Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 is therefore compatible with most 120 mm fans.
LGA1851 | LGA1700 Contact Frame
Intel’s Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU’s backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
High-Quality Bearing
Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.
Optimised Heatsink
The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Related Products
- 16.8 M TRUE RGB COLOR
-
RELIABLE HYDRAULIC BEARING
-
EASY TO INSTALL
-
The mounting kit offers hassle-free installation. UX100 includes all-in-one back-plate is compatible with all the latest Intel and AMD CPU socket.
- Intel: LGA 1156/1155/1151/1150/775
AMD: AM4/AM3+/AM3/AM2+/AM2/FM2/FM1 -
SYNC WITH MOTHERBOARD RGB SOFTWARE
-
HIGH VOLUME AIRFLOW DESIGN
Out of stock
Kraken X42
- The all-new Kraken Series features the most advanced controls ever to be included in an all-in-one liquid cooler. Through CAM’s software interface, users can fine-tune settings to ensure an optimal performance, even in the most intense gaming sessions. Everything, including the pump, radiator, and the fans, have been redesigned to bring you the greatest experience in liquid cooling, all backed by an industry-leading 6-year warranty.
- New performance engineered pump
- Individually addressable RGB and infinity mirror design
- CAM Powered for complete software control
- Includes Aer P radiator-optimized fan
- Advanced lighting modes for a fully dynamic lighting experience
- Reinforced, extended tubing for increased durability
- Industry-leading 6-year warranty
Out of stock
- [DIGITAL/ANALOG] – Customize pump and Fan lighting with ASUS Aura, Gigabyte RGB FUSION, MSI Mystic Light Sync, ASROCK polychrome or through the included ARGB Controller Offering 7 light modes and 8 full light preset colors
- [READY TO SYNC] – Equipped with an ARGB LED Ring on the pump and ARGB radiator fans, lighting effects can be synchronized with select ASUS, Gigabyte, MSI, and ASROCK 5V RGB header motherboards and controlled via motherboard RGB software
- [LOW-PROFILE PUMP] – Provide quick liquid circulation
- [HIGH PERFORMANCE LIGHTING WATER BLOCK] – Copper base plate accelerates the heat conductivity with dazzling lighting through the specially designed water block
- [HIGH EFFICIENCY RADIATOR] – Large surface radiator increases cooling and provides exceptional heat dissipation
- [NO REFILL REQUIRED] – Reinforced-sleeved low evaporation tubing delivers the best durability and effectively decreases the loss of coolant
- Tube length – 400mm
Out of stock
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
Out of stock
ï¿ Integrated addressable RGB lighting for water block and fan
ï¿ Rubber pads included on fan for lower vibration and noise
ï¿ Includes addressable RGB controller with 10 lighting modes and ability to adjust brightness and color changing speeds.
ï¿ Compatible with Intel LGA775/115X/1200/1366/2011/2066 and AMD AM2/AM3/AM4/FM1/FM2 sockets
Out of stock
- The all-new Kraken Series features the most advanced controls ever to be included in an all-in-one liquid cooler. Through CAM’s software interface, users can fine-tune settings to ensure an optimal performance, even in the most intense gaming sessions. Everything, including the pump, radiator, and the fans, have been redesigned to bring you the greatest experience in liquid cooling, all backed by an industry-leading 6-year warranty.
- New performance engineered pump
- Includes Aer P radiator-optimized fan
- CAM Powered for complete software control
- Individually addressable RGB and infinity mirror design
- Advanced lighting modes for a fully dynamic lighting experience
- Reinforced, extended tubing for increased durability
- Industry-leading 6-year warranty
Out of stock
- Supports Intel LGA 2066/2011 3/2011/1366/1156/1155/1151/1150
- Supports AMD TR4/AM4/FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 (CPU Socket)
- 12 Separately Controlled RGB LEDs for unrivaled Lighting Control
- Patented Ring Plus RGB Software Enabled : Changes the light modes, colors, speeds, brightness, fan speeds, and even supports AI voice control in iOS and Android devices
- 240 mm High Efficiency Radiator with Push/Pull Mounting Support
- Exclusive RGB LED Water block, which has 6 LED’s and doubles to match the 12 LED from fans to offer same “Look”
- Simple Setup
- Tt LCS Certified: Liquid Cooling Supported; Compatible with extreme liquid cooling configurations
Out of stock
- Unique LED Riing design
- High static pressure fan blade
- High-quality hydraulic bearing
- Low noise design
Out of stock
- Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150 AMD TR4/AM4/FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 (CPU Socket)
- Patented Ring Plus RGB Software Enabled
- 360mm High Efficiency Radiator with Push/Pull Mounting Support
Out of stock
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
Out of stock
Compatibility | Intel LGA 2066/20113/2011/1366/1156/1155/1151/1150 AMD AMD TR4*/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2 *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box |
Water Block | Material: Copper |
Pump | Motor Speed: 3600 RPM Rated Voltage: 12 V & 5V Power Input: 12V – 3.9 W , 5V – 1.06 W |
Fan | Dimension: 120 x 120 x 25 mm Speed: PWM 500~1500 R.P.M (2510-4PIN) Noise Level: 25.8 dB-A Rated Voltage: 12 V & 5V Power Input: 12V- 1.44 W, 5V – 1.6W (one fan) Max. Air Flow: 56.45 CFM Max. Pressure: 1.59 mm-H2O LED Control: ARGB controller or 5V addressable RGB header on motherboard |
Radiator | Dimension: 270 x 120 x 27 mm |
Tube | Length: 326mm Material: Rubber |
Weight | 1230 g |
Out of stock
- Designed for Extreme Performance
- Diamond powder included for improved thermal conductivity
- Longer lifespan over standard silicon-based compounds
- Easy to apply
- TG-7 Thermaltake high performance and reliable Thermal grease with diamond powder
- 1 Year Warranty
Out of stock
Reviews
There are no reviews yet.