Thermaltake Level 20 MT ARGB Mid Tower Cabinet
₹8,601.69 Original price was: ₹8,601.69.₹7,066.95Current price is: ₹7,066.95.

- Light up the system: 3 Pre-installed 120mm 5V MB Sync ARGB fans (Sync with Asus, Gigabyte, MSI) +1 rear black fan
- Built-in dual-mode 5V ARGB switch board: control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard
- 27 LED modes through I/O port button: wave mode; flow mode; RGB lighting (single color); Radar mode (Red, yellow, green, Cyan, blue, White, Purple); breath mode (8 Colors); full lighted mode; single color mode (7 Colors); light off
- Clear view of PC gaming: two 4mm tempered glass (left & Front) with standard mounting
- Built-in PSU cover: Cover all your cables for a professional look
- 6 Drive Bays: 2. 5” Ssd x 6 or 2. 5” X 4 + 3. 5” X 2
- Supports Mini ITX, Micro ATX, and ATX motherboard
Out of stock
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
Level 20 MT ARGB

Thermaltake Level 20 MT ARGB Mid Tower Chassis
Thermaltake Level 20 MT ARGB is the premium mid-tower synchronized with a motherboard in the level 20 family. Level 20 MT ARGB features enlarged side panel window, ATX motherboard support, and a power cover.
The Level 20 MT ARGB comes preinstalled with three 120mm 5V ARGB LED front fans and one 120mm rear fan. The front fans are addressable to deliver 16.8 million-color RGB illumination and unparalleled ventilation. This model comes ready to sync with RGB capable motherboards from Asus, Gigabyte, MSI, and AsRock.
The Level 20 MT ARGB takes our latest case innovations and wraps them in an ultra-modern style that’s utterly unique in the case market today. Stand out from the crowd with the Level 20.
TT Premium
To continue achieving the corporate mission of delivering the perfect user experience, Thermaltake developed “TT Premium” with the essence of combining supreme quality products with a new logo design. TT Premium is far more than just a guarantee of quality. Behind the name, it represents the passion in DIY, Modding and Thermaltake’s desire to be the most innovative brand in the PC hardware market. To satisfy the demand of the high-end PC users, TT Premium follows its core values of Excellent Quality, Unique Design, Diverse Combinations, and Boundless Creativity to provide a high-performance PC product for every enthusiast
Trio Built-in 120mm 5V ARGB LED Fans
Preinstalled with three 120mm 5V ARGB LED front fans featuring hydraulic bearing, 9 addressable LEDs and 16.8 million-color illumination to guarantee high airflow and custom system designs to show off your PC design skills.
The 5V ARGB LED fans can be controlled using a simple interface built into the I/O panel that cycles through 7 different lighting modes and a range of different color options.
Sync with Motherboard RGB Software
Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and AsRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and AsRock official websites.
Built-in 5V RGB Switch Board
Thanks to the built-in 5V RGB switch board, the Level 20 MT ARGB is able to deliver the addressable RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome motherboards.
Power Cover Design
The Level 20 MT ARGB is designed with a power cover, which can be used to organize unused cables to make for a tidy-looking system.
Dust Reduction
Fitted with a superb top filter, side filter, and bottom PSU filter. Providing excellent protection and reduction against dirt and dust.
Tempered Glass Window
The left side of the Level 20 MT ARGB features a full-length 4mm thick tempered glass panel, which is more durable and less prone to scratches and dust than acrylic panels.
Superior Hardware
The Level 20 MT ARGB supports up to ATX motherboards, CPU coolers up to 170mm in height, VGA lengths up to 366mm without radiator on the right side and PSU sizes up to 170mm in length.
Excellent Cooling Capability
Preinstalled with three 120mm ARGB fans and one 120mm rear fan for optimal cooling performance, this case can house up to three 120mm front fans, one 140mm or two 120mm fans on the top and a radiator size up to 360mm. This allows the user at the same time to build a complete high-end system to suit their needs.
Radiator Supporting List
|
|
Fan Supporting List
|
|
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Related Products
- CAM Powered Smart Device to simplify installation and manage use of RGB lighting and fans
- Premium, all-steel construction with the sleek H-series design; available in four color combinations
- Tempered glass panel showcases custom RGB lighting
- System installation and expansion made easy with all-new cable management system
- Water-cooling installation simplified for both AIO and custom loop
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort
Out of stock
- CAM-powered Smart Device to simplify installation and manage use of RGB lighting and fans
- Premium, all-steel construction with the sleek H Series design; available in four color combinations
- Tempered glass panel showcases custom RGB lighting along with the vertical GPU mount
- Water-cooling installation simplified for both AIO and custom loop
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort
- System installation and expansion made easy with all-new cable management system
Out of stock
-
Item Specifics
- SERIESMPG SERIES
- TYPEMID TOWER
- 5.25″ BAYSNA
- 3.5″ BAYS2
- 2.5″ BAYS2
- EXPANSION SLOTS7
- MAX RADIATOR SUPPORT420
- MAX FAN SUPPORT8
- COLORBLACK
- SIDE PANELTRANSPARENT
- Light up the system: 3 Pre-installed 120 millimeter 12V motherboard Sync RGB fans (Sync with as US, Gigabyte, MSI, as rock, and BIOSTAR 12V header Mob) + 1 Black fan at the back
- Built-in dual-mode 12V Sync controller: Control light via I/O port RGB Light button (16 LED modes/7 Color) or via 12V header RGB sync motherboard (Sync with as US, Gigabyte, MSI, as rock, and BIOSTAR 12V header Mob)
- 16 LED modes through I/O port RGB Light button: RGB mode, single color mode (7 Colors), breath mode (7 Colors), light off 7 Colors: red, yellow, green, cyan, blue, White, Purple]
- A clear view of PC gaming: 4 millimeter thick Tempered Glass Side panel with standard mounting
- Built-in PSU cover: Cover all your cables for a professional look combined with a window to show off your colorful power
- Drive Bays: 3 x 2.5 inches + 2 x 3.5 inches
- Supports Mini ITX, Micro ATX, and ATX motherboard
Out of stock
Dimension : 200 mm x 450 mm x 400 mm
7.8 in x 17.7 in x 15.7 in
Form Factor : Midtower
Materials : Steel chassis, steel exterior, ABS, glass
Motherboard Support : ATX, Micro ATX, Mini ITX,
E-ATX *(up to 275mm wide)
Front I/O : 2x USB 3.0, Mic, Headphone, Reset, LED control
Side Window : Yes
Out of stock
- Premium, all-steel construction with the sleek H-series design; available in four color combinations.
- Tempered glass panel showcases your build with crisp clarity .
- System installation and expansion made easy with all-new cable management system.
- Water-cooling installation simplified for both AIO and custom loop.
- The tempered glass panel and signature PSU shroud showcase beautiful builds.
- New cable routing kit with pre-installed channels and straps, on the back of the motherboard tray, for intuitive and Easy wiring.
- Upgraded, adjustable cable management bar. System installation and expansion made easy with all-new cable management system.
- Two aer F 120mm fans are included for optimal internal airflow.
- Storage Installation: single quick-release 2.5″ SSD tray positioned on the PSU shroud. There are also two 2.5″ steel trays behind the motherboard and one 3.5″ Drive cages below the shroud.
- STUNNING TEMPERED GLASS PANEL to showcase your build.
Item Specifics
- SERIESCORE
- TYPEMID TOWER
- 5.25″ BAYSNA
- 3.5″ BAYS2
- 2.5″ BAYS4
- EXPANSION SLOTS7
- MAX RADIATOR SUPPORT360
- MAX FAN SUPPORT6
- COLORBLACK
- SIDE PANELTRANSPARENT
- SUPPORTED GPU-37816.1
Out of stock
- Premium, all-steel construction with the sleek H-series design; available in four color combinations
- Tempered glass panel showcases your build with crisp clarity
- Water-cooling installation simplified for both AIO and custom loop
- System installation and expansion made easy with all-new cable management system
Out of stock
- Full Metal Exterior Design. Clean interior-PSU Cover & HDDs. Tempered Glass Panel. Unique exterior design with integrated PSU cover
- Fully Equipped with Magnetic Dust Filter. Long GPU (supports up to 15.2in). Full Size PSU support. Equipped with 1x Phanteks 120mm Fans. Front I/O (2x USB 3.0, Headphone, Mic, LED Control, Reset)
- RGB Power Light + Ambient Down Light (10 colors). Integrated RGB Illumination modes + sync with RGB motherboards/Phanteks RGB products
- High Flow. 2x Front Loaded 3.5″ HDD. Supports up to 240/280mm radiator in front. 2x SSD mounting location (1x included)
- Dimension: 200 mm x 450 mm x 400 mm/7.8 in x 17.7 in x 15.7 in (WxHxD). Mid Tower. Motherboard Support: ATX, uATX, mITX, (E-ATX* – up to 275mm wide)
Out of stock
- CAM-powered Smart Device to simplify installation and manage use of RGB lighting and fans
- Premium, all-steel construction with the sleek H Series design; available in four color combinations
- Tempered glass panel showcases custom RGB lighting along with the vertical GPU mount
- System installation and expansion made easy with all-new cable management system
- Water-cooling installation simplified for both AIO and custom loop
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort
- The H500 showcases the signature design of the NZXT H Series cases. The elegant all-steel construction includes the iconic cable management system to streamline building and upgrading your system. You can easily build a powerful system with plenty of options for storage and cooling. The H500 includes two Aer F* fans and a seamless tempered glass side panel.
- Premium, all-steel construction with the sleek H Series design; available in four color combinations.
- Tempered glass panel showcases your build with crisp clarity.
- System installation and expansion made easy with all-new cable management system.
- Water-cooling installation simplified for both AIO and custom loop.
Out of stock
Model |
Versa N24 |
P/N |
CA-1G1-00M1WN-00 |
Case Type |
Mid Tower |
Dimension (H x W x D) |
532 x 247 x 511mm(21 x 9.7 x 20.1 inch) |
Net Weight |
6.1 kg / 13.4 lb |
Side Panel |
Transparent Window |
Color |
Exterior & Interior : Black |
Material |
SPCC |
Cooling System |
Rear (exhaust) :120 x 120 x 25 mm fan (1000rpm, 16dBA) |
Drive Bays |
-Accessible:1 x 5.25’’-Hidden:2 x 3.5’’ or 2.5’’(with HDD tray) , 1 x 3.5″ (without HDD tray)2 x 2.5’’ (with the M/B tray) |
Expansion Slots |
7 |
Motherboards |
6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
I/O Port |
USB 3.0 x 1,USB 2.0 x 2, HD Audio x 1 |
PSU |
Standard PS2 PSU (optional) |
Fan Support |
Front:2 x 120mm , 2 x 140mmTop:2 x 120mmRear:1 x 120mmPower Cover:1 x 120mm |
Radiator Support |
Front: 1 x 240mmTop: 1 x 240mmRear: 1 x 120mm |
Clearance |
CPU cooler height limitation: 155mmVGA length limitation: 415mm (Without Front Fan) |
Out of stock
Reviews
There are no reviews yet.