Lian li Reverse SL120V2-1B Black ARGB 120mm 2500RPM
₹3,388.98 Original price was: ₹3,388.98.₹2,610.17Current price is: ₹2,610.17.

Infinity mirror look all around
• Reversed Blade fan that intakes air while seeing the infinity effect
• Only one cable is required for a cluster of fans
• Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity
• 40 LEDs in each fan
• Quick PIN connection to provide ease of installation
• Optimized for mounting at the bottom of the case or on top of the radiator
Out of stock
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
Lian li Reverse SL120V2-1B Black ARGB 120mm 2500RPM
Infinity Mirror ARGB Fan
Introducing a new look to PC fans and a new level of installation simplicity and light effect customizability.
ALUMINUM TRIM SURROUNDED INFINITY MIRROR
Surrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look.
REAR RIM OF LED AROUND THE ALUMINUM LOGO
The circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart.
Specifications:
| PRODUCT NAME | UNI FAN SL-INF REVERSE BLADE |
| MODEL | G99-12RSLIN1B-IN |
| COLOR | Black |
| NUMBER OF FANS | 1 |
| CONTROLLER | No |
| MATERIAL | PBT/PC/Aluminum |
| FAN DIMENSION | 120 X 122 X 25 ( mm ) |
| RATED VOLTAGE | DC 12V (FAN) & 5V (LED) |
| FAN SPEED | 0, 200-2100 RPM |
| AIR PRESSURE | 2.02 mmH2O (Maximum) |
| AIRFLOW | 63.6 CFM (Maximum) |
| ACOUSTIC NOISE | 32 dB(A) |
| LOCKED CURRENT | ≧50mA |
| BEARING TYPE | Fluid Dynamic Bearing (FDB) |
| OPERATION VOLTAGE | DC 12V & 5V |
| START-UP VOLTAGE | ≦6V |
| INPUT CURRENT | 180mA (FAN) /600mA (LED) |
| INPUT POWER | 5.16W |
| Warranty | 2 Years |
| 5 |
|
0 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
Related Products
- #1 case choice for PC builders
- Fits GPUs under 340mm with front-mounted AIO and any GPU with top-mounted AIO up to 360mm
- RapidRoute cable management system
- High-airflow optimized steel front panel
- PC expert support available when you buy from our store
Available on backorder
Infinity mirror look all around
• Reversed Blade fan that intakes air while seeing the infinity effect
• Only one cable is required for a cluster of fans
• Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity
• 40 LEDs in each fan
• Quick PIN connection to provide ease of installation
• Optimized for mounting at the bottom of the case or on top of the radiator
Out of stock
Mid-tower chassis configurable for air cooling and water cooling
• Airflow optimized front, top and PSU shroud side mesh panels
• Equipped with 2 x front 160 PWM fans (ARGB or non-RGB) and 1 x rear 140mm PWM fan
• Supports 360 radiator at the top, front and a maximum of 10 fans
• Includes rear PCIe fan bracket
• Front I/O that can be relocated to the bottom
• Extensive cable management solution
Out of stock
- Aluminum Exterior I SPCC Steel Interior I 3.0mm Black tempered glass side panels I (D) 342mm x (W) 170mm x (H) 250mm
- Mini-ITX Motherboard Support
- I/O PORTS 1x USB 3.0, 1x USB 3.1 TYPE-C, 1x HD AUDIO
- FAN SUPPORT : Top:2x 120mm or 2x 140mm Bottom:1x 120mm I DRIVE : 2x 2.5” HDD or 1x 2.5” SSD and 1x 3.5” HD
- RADIATOR SUPPORT : Top:1x 120 or 240 I Bottom:1x 120
Out of stock
- Mesh Panels at the top, front and rear, providing extreme airflow
- Modular backplate (5 + 2 expansion slot), supporting MINI-ITX up to E-ATX MB
- Included 2 x 140MM PWM fans at the front, and a 120mm PWM fan at the rear
- Support 6 x 2.5” SSD or 4 x 3.5” HDD + 2 x 2.5” SSD
Out of stock
• Infinity mirror look all around
• Reversed Blade fan that intakes air while seeing the infinity effect
• Only one cable is required for a cluster of fans
• Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity
• 40 LEDs in each fan
• Quick PIN connection to provide ease of installation
• Optimized for mounting at the bottom of the case or on top of the radiator
Out of stock
Puts your connections within easy reach, including a USB 3.1 Type-C Port, 2x USB 3.0 port, and a combination audio/microphone jack.
- Power Button
- 2x USB 3.0 ports
- USB 3.1 Type-C port
- Headphone/Mic Combo Jack
- Reset button
Available on backorder
- Mid-tower chassis configurable for air cooling and water cooling
- Airflow optimized front, top and PSU shroud side mesh panels
- Equipped with 2 x front 160 PWM fans (ARGB), ARGB lighting and mode could be controlled by M/C buttons from the I/O Panel
- Supports 360 radiator at the top, front and a maximum of 9 x 120mm fans
- GPU Anti-Sag support bracket included
- Extensive cable management solution
Out of stock
- White, Mid- Tower, (D) 480.9mm x (W) 235mm x (H) 491.7mm
- 7 Expansion Slots, Drive Cage:2 x 2.5” SSD + 2 x 3.5” HDD ; PSU Cover:2 x 2.5” SSD ; Behind MB tray: 2 x 2.5” SSD
- I/O PORTS : 1 x Power Button, 1 x Reset Button, 2 x USB 3.0, 1 x USB Type C, 1 x Audio
- INCLUDED FANS : Front: 2 x 160mm ARGB Fans, Rear: 1 x 140mm PWM Fan ; FAN SUPPORT : Top: 3 x 120mm / 2 x 140mm, PSU Cover: 2 x 120mm / 2 x 140mm (Air Cooling mode), Front: 3 x 120mm / 2 x 140mm / 2 x 160mm, Rear: 1 x 120mm / 1 x 140mm, PCIe Fan Bracket: 1 x 120mm
- RADIATOR SUPPORT : Front: 360 / 280 / 240mm, Top: 360 / 280 / 240mm, Bottom: 240mm
Out of stock
- Motherboard Support: ATX/ Micro-ATX/ Mini-ITX
- FAN SUPPORT : Top: 3x 120mm or 2x 140mm ,Side: 2x 120mm or 2x 140mm, Bottom: 3x 120mm or 2x 140mm, Rear: 1x 120mm
- RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator, Side: 240mm or 280mm radiator, Bottom: 360 or 280mm or 240mm radiator
- IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button
- DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD)
Out of stock
- With Fan Speed Controller
- Noise-optimized and performance-oriented fan
- FDB Bearing with copper shielding to ensure stable rotation of the impeller
- Liquid crystal polymer fan blades to ensure tight tolerance
- Toggle between Silent, Normal, and Performance mode via included fan speed controller
- UNI FAN style daisy-chainable design for ease of cable management
- Extension cable included for daisy-chaining between each cluster
Out of stock
- Full Tower Chassis with 3 modes: Standard/ Rotate/ Dual-System , (D) 678.5mm x (W) 279mm x (H) 674mm
- EXPANSION SLOT : System 1 – 8/ System 2 – 3 (at PSU shroud, with optional riser cable)
- I/O PORTS : 1 x Power Button, 1 x Reset Button, 1 x Light Color Button (C), 1 x Light Mode Button (M), 2 x USB 3.0, 1 x USB Type C, 1 x Audio
- Supports up to 4×480 + 1×360 Radiators and a maximum of 17 Fans
- Two reservoir plates accommodate large D5/ DDC pump
Out of stock






















Reviews
There are no reviews yet.