CORSAIR iCUE LINK QX120 120mm RGB FAN WHITE
Original price was: ₹5,083.90.₹3,525.42Current price is: ₹3,525.42.
- Keep Cool: Powerful PWM-controlled fan speeds from 480 RPM up to 2,400 RPM, so your fans only spin as fast as you need, pushing up to 63.1 CFM of air with 3.8mm-H2O of static pressure.
- Exclusive Time Warp Lighting Mode: Equipped with 34 RGB LEDs, spread across two distinct light zones on either side, and powered by iCUE LINK for exclusive lighting modes such as the strobing Time Warp (requires iCUE LINK System Hub, sold separately).
- Quiet Operation with Magnetic Dome Bearing: CORSAIR’s Magnetic Dome bearing retains all the performance of ML fan technology and further reduces friction at low fan speeds.
- Zero RPM Mode: Supports Zero RPM PWM signals to completely eliminate fan noise at low loads.
- iCUE LINK System Hub and Bridge Connectors Included: Chain your fans together without wires using the included bridge connectors and seamlessly connect them all to the iCUE LINK System Hub with just a single cable.
Available on backorder
CORSAIR iCUE LINK QX120 120mm RGB FAN WHITE
SMART AND SOPHISTICATED
Light up your system from any angle and use exclusive lighting modes such as the strobing Time Warp. Take advantage of smart component features such as temperature sensors and two-way communication with the iCUE LINK System Hub.
Specifications:
| Â Model Number | CO-9051005-WW |
| Â Fan Size | Â 120mm x 25mm |
| Â Color | White |
| Series | QX RGB Series |
| Bearing Type | Magnetic Dome |
| Power Connector | iCUE LINK |
| RPM | 0, 480 – 2400 RPM ±10% |
| Â Warranty | Â 5 Years |
| Note | *** Features, Price, Specifications are subject to change without notice. |
Related Products
Features:
Crystallized A-RGB Lights – Unique and unorthodox crystallized A-RGB diffusers on both sides for distinctive looks and even illumination.
Daisy Chainable – Coming with a pair of male and female ARGB connectors the fans can be daisy-chained to minimize the hassle in builds where multiple units are used.
Motherboard sync – The fan’s RGB can be controlled by any motherboard RGB utility thanks to its 3-pin ARGB connector.
Hydraulic Bearing Gear Motor – Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
Shock-Absorbing Pads – Shock absorbing shims at all corners protect the fan and reduce vibration noise between the fan and the chassis.
Available on backorder
Out of stock
Features:
Optimised for Static Pressure
During the development of the new P14 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure.
0 dB Mode — Zero rpm
The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.
More Efficient Technology
The motor is powered by a PWM IC of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors.
Maximum Quietness, Minimum Vibration
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.
Extended Life Span
A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.
Available on backorder
Virtually Silent due Fluid Dynamic Bearing
As a special feature, the ARCTIC P12 Max is equipped with ARCTIC’s proven Hydrodynamic Bearing. This enables the virtually silent operation at low speeds that customers have been asking for.
Extremely Wide Speed Range
The P12 Max features the controllable speed of an impressively wide range from 200 rpm up to 3300 rpm.
Maximum Performance – Without Compromises
The P12 Max delivers focused airflow and high static pressure, making it suitable for all scenarios.
0dB Mode – Zero RPM
The fan speed can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.
Improved Stability
The P12 Max features a closed fan wheel design. The advantage of this fan wheel combination is a pressure stability without compromise.
Out of stock
Features :
- Seamless Daisy-Chaining: Say goodbye to cable clutter and tangled wires. The Ant Esports Crystaflow fans feature an innovative daisy-chain connectivity, allowing you to connect multiple fans with a single cable. This streamlines your setup and keeps your rig looking clean and organized.
- Mesmerizing Infinity Mirror Design: Immerse yourself in a stunning visual spectacle with the infinity mirror design adorning the sides of each fan. The mesmerizing lighting effects add a captivating dimension to your gaming setup, enhancing both aesthetics and ambiance.
- Versatile ARGB Control: Take control of your PC’s lighting atmosphere effortlessly. The Crystaflow fans are equipped with Addressable RGB (ARGB) technology, seamlessly integrating with your motherboard’s RGB utility. Customize the lighting with a spectrum of colors and dynamic effects to match your mood or gaming environment.
- SATA Powered ARGB Controller: Experience unrivaled compatibility with the SATA-powered ARGB controller. Even if your motherboard lacks support for ARGB devices or has a missing 3-pin 5V ARGB header, the included controller ensures you can still enjoy the dazzling lighting effects of the Crystaflow fans without limitations.
- Optimal Cooling Performance: Achieve the perfect balance between cooling power and quiet operation. With a high static pressure of 2.05mm H2O and an impressive airflow of up to 68.8 CFM, these fans are tailor-made for radiators and cases alike. Experience efficient heat dissipation while enjoying near-silent noise levels, ensuring your system stays cool without sacrificing tranquility.
Available on backorder
Features :
- Octagonal ARGB Lights:Unique and unorthodox octagonal ARGB diffusers on both sides for distinctive looks and even looks.
- Hydraulic Bearing Gear Motor : Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
- Long Life Span : Being rated at 30,000 hours these fans are not only long lasting but also maintenance free.
- Shock-Absorbing Pads : Shock absorbing shims at all corners protects the fan and reduce vibration noise between the fan and the chassis.
- Molex Connector : Operating via molex power the fans work at 12V with at a maximum of 1200 RPM.
Available on backorder
Optimised for Static Pressure
During the development of the new ARCTIC P14 PWM PST , special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators.
0 dB Mode — Zero rpm
More Efficient Technology
The motor is powered by a PWM IC of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy without compromising the performance.
Maximum Quietness, Minimum Vibration
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
Extended Life Span
A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.
Available on backorder
- High performance cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 25.8 dB(A), >150,000 h MTTF
- Highly optimised low-noise design provides outstanding quietness of operation, excellent static pressure and strong airflow (CFM), square frame for water cooling radiators and chassis ventilation
- 1500rpm 4-pin PWM version with excellent balance of performance and quietness, supports automatic motherboard speed control (powerful airflow when required, virtually silent at idle)
- Streamlined redux edition: proven Noctua quality, wide range of optional accessories (anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc.)
Available on backorder
- Connector & pin- configuration : 3 pin I Rotational Speed : 4500 RPM
- Cable length : 20cm + 30cm NA-EC1 extension cable I Low-Noise Adaptor (L.N.A.)
- Frame technology : AAO (Advanced Acoustic Optimisation)I Blade geometry : A-Series with Flow Acceleration Channels
- Max. input power : 1,56 W I Operating voltage : 12 V
- 6 Year Warranty
Out of stock
Teaming up eleven stator guide vanes with a specially conceived seven blade impeller, the NF-F12’s Focused Flow™ system creates outstanding static pressure and focuses the airflow for superior performance on heatsinks and radiators. At the same time, a wide range of advanced aerodynamic design measures, second generation SSO-Bearing and Noctua’s new, custom designed PWM IC for fully automatic control guarantee astounding quietness of operation. The NF-F12 comes with modular cabling, integrated anti-vibration pads and two speed settings for full flexibility. Its commanding performance, exhaustive set of features and Noctua’s trusted premium quality make it an elite choice for use on air coolers, radiators and other pressure demanding applications.
Out of stock
Features:
- Ultra Silent fan
- ARGB PWM fan
- High-Quality Hydraulic bearing
- SATA power connector
- Airflow up to 69.01 CFM
- Optimized fan blades for high airflow performance
- Supports ARGB Motherboard Sync Functionality
- PWM AEOLUS Box Supports Up to 8 fans & 2 LED Strips
- PWM AEOLUS Box Extension enables more lighting effects
ULTRA PERFORMANCE. SILENT ACOUSTICS.
The AEOLUS M3-1204R is a 4-pack combo of the AEOLUS M3-1201 ARGB fan with an additional PWM AEOLUS box and controller.
SUPERIOR AIRFLOW PERFORMANCE.
Built with emphasis on performance, The AEOLUS M3 fans can range from 800-2000RPM for extremely high air pressure.
REFINED FAN DESIGN.
The fan frame features a chamfered design for a more robust air intake, while the altered fan blade design allows maximum airflow performance, better acoustics, and a minimalist style.
Available on backorder
- DIGITAL A-RGB: The 12 A-RGB LEDs placed along the fan hub and the transparent rotor with its closed design ensure even and rich lighting
- EASY TO COMBINE: Both the fan and the A-RGB cable have an integrated Y-splitter, making it even easier to retrofit and control additional fans
- OPTIMIZED FOR STATIC PRESSURE: Thanks to its high static pressure, the fan guarantees efficient cooling, even with increased air resistance. Suitable for use on heat sinks & radiators
- 200-1900 RPM (0 rpm <5 %): Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at a minimum while maximum cooling performance is given when needed
- TECHNICAL DATA: Fan speed: 200-1900 RPM (0 rpm <5 %), Air Flow: 68.9 CFM/117.06 m³/h, Static Pressure: 2.00 mm H2O, Noise Level: 0.3 Sone, Fan Connector: 4-pin, LED Connector: 3-pin
Available on backorder
Reviews
There are no reviews yet.