ANT Esports Fan Royale Flow 120 Auto RGB V2
₹358.47
Features:
Crystallized A-RGB Lights – Unique and unorthodox crystallized A-RGB diffusers on both sides for distinctive looks and even illumination.
Daisy Chainable – Coming with a pair of male and female ARGB connectors the fans can be daisy-chained to minimize the hassle in builds where multiple units are used.
Motherboard sync – The fan’s RGB can be controlled by any motherboard RGB utility thanks to its 3-pin ARGB connector.
Hydraulic Bearing Gear Motor – Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
Shock-Absorbing Pads – Shock absorbing shims at all corners protect the fan and reduce vibration noise between the fan and the chassis.
Available on backorder
Ant Esports Royale Flow 120 Auto RGB V2 fans come with a unique crystalized ARGB diffuser on both sides of the frame ensuring not only a unique but also a homogeneous look in your PC. The fans can either be connected to your motherboard ARGB header for easy software-based control or can be run in A-RGB mode in case your motherboard does not support ARGB.
Taking things a step further these fans can be daisy-chained to minimize the hassle in case one plans to use multiple fans in the same build. Equipped with a Hydraulic Bearing gear motor these fans are rated at 30,000 hours of operation and using its Molex the connector can run up to 1200 RPM delivering 38 CFM of airflow.
Keep all your components cool even under extensive load all under 20 dB thanks to its rubber grommets at the edges to lower down noise levels.
Features:
Crystallized A-RGB Lights – Unique and unorthodox crystallized A-RGB diffusers on both sides for distinctive looks and even illumination.
Daisy Chainable – Coming with a pair of male and female ARGB connectors the fans can be daisy-chained to minimize the hassle in builds where multiple units are used.
Motherboard sync – The fan’s RGB can be controlled by any motherboard RGB utility thanks to its 3-pin ARGB connector.
Hydraulic Bearing Gear Motor – Noise reduction technology & sound absorbing technique brings down the noise to provide you a quiet working environment of less than 20 dB.
Shock-Absorbing Pads – Shock absorbing shims at all corners protect the fan and reduce vibration noise between the fan and the chassis.
Specification:
| Dimensions | 120 x 120 x 25 mm |
| Noise | ≤ 20 db (A) |
| Air Flow | 38 CFM |
| Connector | Molex Connector |
| Speed | 1200 ± 38% RPM |
| Warranty | 1 Year |
Related Products
- Anti-leak Tech Inside liquid cooling system equipped.
- Double window panes and immersive ambient lighting ready to provide a perfect display of aesthetic illumination.
- 16.7 M true color RGB flowing light system with 5 in-built effects and 36 interchangeable lighting modes.
- Motherboard and controller Addressable RGB SYNC control supported.
- Ultra-large, pure copper CPU block provides effective coverage and heat dissipation for CPUs of any size.
- An optimized E-shaped micro water channel is designed to effectively enhance heat circulation efficiency and to enlarge heat contact areas.
- The ceramic axle bearings and axle cores guarantee an ultra-long service life.
- Supports mainstream INTEL and AMD socket mounting, including TR4/AM4.
- WS2812B ADD-RGB LED is applied and the below 3pin ADD-RGB Headers are compatible for the device: 5V/D/G and 5V/D/NC/G, which is used for the mainstream M/B brands like ASUS, MSI, Gigabyte.
Out of stock
- The all-new Kraken Series features the most advanced controls ever to be included in an all-in-one liquid cooler. Through CAM’s software interface, users can fine-tune settings to ensure an optimal performance, even in the most intense gaming sessions. Everything, including the pump, radiator, and the fans, have been redesigned to bring you the greatest experience in liquid cooling, all backed by an industry-leading 6-year warranty.
- New performance engineered pump
- Individually addressable RGB and infinity mirror design
- CAM Powered for complete software control
- Includes Aer P radiator-optimized fan
- Advanced lighting modes for a fully dynamic lighting experience
- Reinforced, extended tubing for increased durability
- Industry-leading 5-year warranty
Out of stock
- Mercury240 RGB comes with 256-Color RGB LED Lights, PTFE Coated Tube, Graphite Bearings, Ultra-efficient PWM RGB LED radiator fans and provides Water Pressure of 2.3 meters High
- Model Name: Mercury120 RGB, Cooling Type: Water Cooling, Radiator Dimensions: 154 x119 x27mm, Radiator Material: Aluminium.
- Pump dimensions: 80 x 80 x 60 mm, Material: PPS, Lifespan: 50,000 hours, Connector: 4-PIN RGB & SATA power, Power Consumption: 8.1 W, Noise: ≤26dB (A), Flow rate: 3.5 L/Min
- Fan Dimensions: 120*120*25mm, Fan Type: PWM RGB LED Fan, Fan Speed: 900-1800rpm±10%, Fan Airflow73.31CFM (2.021 m3/min), Static Pressure: 2.25 mm-H20, Fan Noise: ≤ 36 dBA, Fan Lifespan: 40000 hours at 25℃ room, ambient 15-65% RH, Connector: 4-Pin, , Power Consumption: 3.6 W
- Socket Compatibility: Intel LGA 2066 / 2011-V3 / LGA2011 / LGA1366 / LGA1156 / 1155 / 1151 / 1150 / 775, TR4/ AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1 （For TR4 socket, please contact your regional distributors for more info. 5 Years Warranty When Purchased From An Authorized Antec Partner
Out of stock
- High Static Pressure Led Fan: Quiet 120 Mm Blue Led Fan (Max 77 Cfm), Straight Touch Technology: 8 Mm Thick Copper Coldplate
- Unique Heatsink Design: Two-Tiered Fin Structure Dissipates Heat Efficiently, While Aluminium Oxide Coating Prevents Oxidation
- Broad Socket Compatibility: Compatibility With The Newest Intel And AMD platforms.
- Fan: 120 mm Blue LED Fan with PWM (800 – 1.900 RPM), Airflow: Max. 77 CFM – Noise: 20.3 – 34.5 dBA
- CPU Support: Intel LGA : 775, 1150, 1151, 1155, 1156, 1366, 2011, AMD: AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+.
Out of stock
- SILENT LED FAN: 92mm blue LED fan for ultra-quiet operation and Straight Touch copper heatpipes provide full contact to the CPU and more efficient heat transference.
- Antec Cooler Fan has 43 x 86 mm aluminum fins offer a larger surface area for heat transference and Compatibility with Intel and AMD platforms, and the push-pin mounting system and included thermal paste make for a fast, simple installation
- Cpu Cooler Fan For Intel Socket Lga 775, 1150, 1151, 1155, 1156. and Cpu Cooler Fan For Amd Socket Fm1, Fm2 ,Am3+ ,Am3 ,Am2+ ,Am2
- Cpu Cooler Dimension : Height-122.5Mm , Length-116Mm , Breadth-80.6Mm and Cpu Cooler Fan With 9Cm High Quality Rifle Bearing Led Fan, Noiseless Cpu Cooler Fan With 20Dba
- One year Warranty from the date of invoice
Out of stock
ï¿ Integrated addressable RGB lighting for water block and fan
ï¿ Rubber pads included on fan for lower vibration and noise
ï¿ Includes addressable RGB controller with 10 lighting modes and ability to adjust brightness and color changing speeds.
ï¿ Compatible with Intel LGA775/115X/1200/1366/2011/2066 and AMD AM2/AM3/AM4/FM1/FM2 sockets
Out of stock
- Designed for Extreme Performance
- Diamond powder included for improved thermal conductivity
- Longer lifespan over standard silicon-based compounds
- Easy to apply
- TG-7 Thermaltake high performance and reliable Thermal grease with diamond powder
- 1 Year Warranty
Out of stock
- Package included: Individually addressable RGB Case Fan 120mm x 3 , 400mm RGB Strip x 2 , Control Hub x1
- Convex designed dual addressable RGB ring offered best lighting effect: convex design kept RGB lighting effect at an optimal point and left tolerance for other RGB components such as mobo/ram/ GPU, water cooling components, and SSD plate;
- 16.8 Million Colors & 18 Independent Controlled LEDs: With Dual ring, Total 18 separately controlled RGB LEDs smoothed out the overall RGB effect and leaves no gaps between LEDs;
- Synchronizable RGB lighting via motherboard: Sync ready with all mobo houses including Gigabytes, Asus, MSI, and Asrock;
- Extreme Cooling Performance – 45.03 CFM & 2.56 mm: PWM Fan optimized heat dissipation and hydraulic bearing ensured ultra-quiet operation;
Available on backorder
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
2 in stock
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
1 in stock
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
- Concentrated Compression Blade (CCB) for high-static pressure of demanding applications such as radiators, the CCB is engineered to focus the inner weaker circle of air outwards, allowing the outer section to pressurize and compress the air.
- Wind Blocker Frame: To achieve maximum static pressure in all applications, the frame is designed to work with the CCB to reduces the blade’s noise and vibration, creating a perfect balance between power and sound.
- Hydraulic Bearing/Low-Noise Design: The hydraulic bearing self-lubricates with a high quality, friction-reducing substance which lowers operating noise and improves efficiency. The Low-Noise Cable can reduce the noise level by 24% from 24.6dBA to 18.7dBA.
- Anti-vibration Mounting System: In-mold injection anti-vibration rubber pads provide hassle-free usage for 80% protection coverage, including all four corners.
- Four colors of the Patented LED Versions Available: Ring 12 LED Series is also available with different LED versions (red, blue, green, and white), adding cooling aesthetics to the chassis.
- 3 years warranty.
- Inlet and outlet temp. are 49℃ and 44.5℃ in respective, △T= 4.5℃
Out of stock
Reviews
There are no reviews yet.