ARCTIC 4-Pin PWM Fan Splitter Cable
₹1,694.07 Original price was: ₹1,694.07.₹422.88Current price is: ₹422.88.

Features:
4-Pin PWM Fan Splitter Cable
Increase Your Ventilation
Even if you don’t have enough fan headers on your motherboard, the 4-Pin PWM Fan Splitter Cable allows you to connect up to four case fans to a single header. If you want to connect more than four case fans or the total power consumption exceeds 1 A, you should use the ARCTIC Case Fan Hub. This has ten fan slots and is powered directly via Sata power.
Improved Cable Management
The 4-Pin PWM Fan Splitter Cable makes it easier to manage your cables, allowing you to easily place fans at any position in your case. The 70 cm distance to the first fan connector allows you to run the cable in an area of the case where it is not visible.
Synchronous Fan Control
Your configured PWM signal will be synchronously sent to all fans which are connected to the 4-Pin PWM Fan Splitter Cable. The rpm of the first fan socket will be read out and fed back to your system.
Minimal Cross-Section — Maximum Flexibility
ARCTIC uses the same materials for the 4-Pin PWM Fan Splitter Cable as for the case fan cables. These materials have proven to be durable and flexible. Additional sheathing was intentionally omitted to keep the cross-section small. This allows the cables to be incorporated inconspicuously into the existing cable management system and also to be routed through narrow areas of the case.
Available on backorder
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
ARCTIC 4-Pin PWM Fan Splitter Cable
Voltage Control Is Also Possible
The 4-Pin PWM Fan Splitter Cable is also compatible with 3-Pin fans and connectors. This allows the fan speed to be controlled via the voltage and is passed on to all connected fans. As with 4-Pin PWM fans, the speed of the first fan is read out, while the fourth Pin remains free.
Specifications:
| Â Model Number | Â ACCBL00007A |
| Â Connector | Â 1 x 4-Pin PWM Connector
4 x 4-Pin PWM Socket (rpm signal on first socket only) |
| Â Cable Length (overall) | Â 700 mm |
| Â Cable Length (to first socket) | Â 400 mm |
| Â Cable Length (between sockets) | Â 100 mm |
| Â Colour | Â Black |
| Â Width | Â 54 mm |
| Â Height | Â 23 mm |
| Â Length | Â 190 mm |
| Â Weight | Â 0.01 kg |
| 5 |
|
0 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
Related Products
Features:
FRACTAL DESIGN USB-C 10Gbps Cable – Model D
Add USB-C functionality to your Pop series case or Focus 2 case with this USB-C 10Gbps Model D cable
• Fast and easy USB-C upgrade for Pop series and compatible cases.
• 670mm Length (without connectors).
• 10Gbps bandwidth.
Available on backorder
Antec Sleeved Extension PSU Cable Kit – Black features fully shielded and multi-layered with 16 AWG high-quality copper strands. PC cable combs ensure cable separation and increased airflow while maintaining an organized look inside your PC and keep your cables in a tidy arrangement.
The cable adopts a three-layer braiding design, and the outer layer is ultra-dense braiding. The middle insulation layer features acid and alkali resistance, flame resistance, moisture resistance, mildew resistance, etc.
Premium Interface
The high-quality segment used in the wire rod and a precise combination are machine-made to ensure the stability of the series transmission.
Available on backorder
Features :
- Using Heatshrinkless Sleeving method offers clean system appearance.
- Premium Pet material made for inspiring and entertaining cable routing experiences.
- Ant Esports Mod sleeved cable extension kit is designed for modding and Pc enthusiast.
- Constructed with 16AWG wire to handle higher Temperature and provide better efficiency.
- Extension Cable Kit uses universal connectors, making the extension cables compatible with any standard PSU.
Available on backorder
Features :
- Using Heatshrinkless Sleeving method offers clean system appearance.
- Premium Pet material made for inspiring and entertaining cable routing experiences.
- Ant Esports Mod sleeved cable extension kit is designed for modding and Pc enthusiast.
- Constructed with 16AWG wire to handle higher Temperature and provide better efficiency.
- Extension Cable Kit uses universal connectors, making the extension cables compatible with any standard PSU.
Available on backorder
- Audio adapter for PS5, PS4 and Nintendo Switch
- Capture voice chat and gameplay sound
- Plugs directly into controller
- Extra long cable for freedom of movement
- Braided cable jacket and gold-plated connectors
Available on backorder
Features :
- Using Heatshrinkless Sleeving method offers clean system appearance.
- Premium Pet material made for inspiring and entertaining cable routing experiences.
- Ant Esports Mod sleeved cable extension kit is designed for modding and Pc enthusiast.
- Constructed with 16AWG wire to handle higher Temperature and provide better efficiency.
- Extension Cable Kit uses universal connectors, making the extension cables compatible with any standard PSU.
Out of stock
Feature
- Antec Full PCIe Gen4 x16 speed: PCIE Gen4 dedicated cables fully supports the PCIE 4.0 devices to privide the perfect stable FPS, and is backward-compatible with PCIE 3.0/PCIE 2.0/PCIE 1.0.
- Compatible with all of the GPU: Includes the new RTX series such as RTX4090, RTX4070ti, RTX3090ti, RTX3090 , and MORE.
- Right Angle Cable Sleeves: Allow for max flexibility, it won’t affect the cable transmission and makes cable management easy.
- High Stability: Gold-plated PCI pins, EMI shielded 30 AWG tinned copper wires , which ensures the signal is full speed, stable transmission.
- Ultimate High Speed: The extender is capable of expanding bandwidth up to 16Gbps and beyond, featuring extremely fast graphic data transmission.
Available on backorder
Feature:
- Antec Full PCIe Gen4 x16 speed: PCIE Gen4 dedicated cables fully supports the PCIE 4.0 devices to privide the perfect stable FPS, and is backward-compatible with PCIE 3.0/PCIE 2.0/PCIE 1.0.
- Compatible with all of the GPU: Includes the new RTX series such as RTX4090, RTX4070ti, RTX3090ti, RTX3090 , and MORE.
- Right Angle Cable Sleeves: Allow for max flexibility, it won’t affect the cable transmission and makes cable management easy.
- High Stability: Gold-plated PCI pins, EMI shielded 30 AWG tinned copper wires , which ensures the signal is full speed, stable transmission.
- Ultimate High Speed: The extender is capable of expanding bandwidth up to 16Gbps and beyond, featuring extremely fast graphic data transmission.
Available on backorder
Features:
The cable adopts a three-layer braiding design, and the outer layer is ultra-dense braiding. The middle insulation layer features acid and alkali resistance, flame resistance, moisture resistance, mildew resistance, etc.
Premium Interface
The high-quality segment used in the wire rod and a precise combination are machine-made to ensure the stability of the series transmission.
Outstanding Length
The length is 300 mm, which ensures that most users do not occupy
the extra space in the cabinet when installing the extension cable.
Available on backorder
Features:
The cable adopts a three-layer braiding design, and the outer layer is ultra-dense braiding. The middle insulation layer features acid and alkali resistance, flame resistance, moisture resistance, mildew resistance, etc.
Premium Interface
The high-quality segment used in the wire rod and a precise combination are machine-made to ensure the stability of the series transmission.
Outstanding Length
The length is 300 mm, which ensures that most users do not occupy
the extra space in the cabinet when installing the extension cable.
Available on backorder
Features:
The cable adopts a three-layer braiding design, and the outer layer is ultra-dense braiding. The middle insulation layer features acid and alkali resistance, flame resistance, moisture resistance, mildew resistance, etc.
Premium Interface
The high-quality segment used in the wire rod and a precise combination are machine-made to ensure the stability of the series transmission.
Outstanding Length
The length is 300 mm, which ensures that most users do not occupy
the extra space in the cabinet when installing the extension cable.
Available on backorder












Reviews
There are no reviews yet.