Pump/Cold Plate | |
VRM Fan | 40 mm, 1000 – 3000 RPM (Controlled by PWM) |
Pump | 800 – 2000 RPM (Controlled by PWM) |
Power Consumption | 1.0 W – 2.7 W (Pump and VRM Fan) |
Cold Plate | Copper, Micro Skived Fin |
Tube Length | 350 mm |
Tube Diameter | Outer: 12.4 mm, Inner: 6.0 mm |
Dimensions (w/o tubes) | 98 mm x 78 mm x 53 mm |
Fan | |
Fan Speed | 200 – 1800 RPM (Controlled via PWM) |
Airflow | 56.3 CFM |
Static Pressure | 2.2mm H2O |
Current/Voltage | 0.08 A / 12 V DC |
Bearing | Fluid Dynamic Bearing |
Noise Level | 0.3 Sone |
Connector | 4-pin-Connector |
Dimensions | 120 mm x 120 mm x 25 mm |
General | |
Socket Compatibility | Intel™ 115X, 2011-3*, 2066* *Square ILM AMD™ AM4 |
Thermal Compound | MX-4 (0.8 g) |
Total Weight | 932 g (Fan, Radiator, Pump, Tubes) |
Radiator | |
Material | Aluminum |
Dimensions | 157 x 120 x 38 mm |
ARCTIC LIQUID FREEZER II 120 AIO COOLER
₹6,355.93 ₹4,661.02

- NEWLY DEVELOPED PWM-CONTROLLED PUMP: The Liquid Freezer II features a completely new, PWM-controlled pump with a copper base, improved efficiency, low power usage, and quiet operation.
- IMPROVED POWER EFFICIENCY: Unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise if no cooling is needed, even with its additional fan for VRM cooling.
- MOTHERBOARD VRM COOLING FAN: An additional 40 mm fan next to the pump helps cooling the motherboards VRM chips. This prevents overheating, especially when overclocking and allows continous heavy loads.
- MAINTENANCE-FREE WATER LOOP: The water loop is sealed, therefore no water or additives have to be refilled
- INTEGRATED CABLE MANAGEMENT: The PWM-cable of the fan is integrated into the sleeveless tubing. Thus fewer cables are exposed for a clean and sleek look within your case
Out of stock
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
LIQUID FREEZER II 120
LIQUID FREEZER II SERIES
At ARCTIC, we are proud of our completely new all-in-one CPU water cooler series. For the Liquid Freezer II Series, we have used our experience in CPU water cooling to develop a completely new compact water cooling pump. The new pump of the Liquid Freezer II Series ensures an ideal ratio of high CPU cooling performance to low noise levels.
The CPU AiO water cooler has integrated cable management within fully sleeved tubes for a clean look in your PC’s case. Our powerful P-fans provide a fast heat transfer thanks to their high static pressure and outstanding performance.
We recommend the Liquid Freezer II Series, an all-in-one CPU water cooler for those looking for superior performance and low noise level at a fair price.
NEWLY DEVELOPED IN-HOUSE PWM-CONTROLLED PUMP
The Liquid Freezer II Series features an all-new, in-house developed PWM-controlled pump with a copper base, improved efficiency, low power usage, and quiet operation.
Unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise if no cooling is needed, even with its additional fan for VRM cooling.
MOTHERBOARD VRM COOLING FAN
An additional 40 mm fan next to the pump helps to cool the motherboard‘s VRM chips. This prevents overheating, especially when overclocking, and allows for continuous heavy loads.
MAINTENANCE-FREE WATER LOOP
The water loop is sealed, therefore no water or additives have to be refilled.
P-FAN FOR INCREASED PERFORMANCE
The Liquid Freezer II benefits of all advantages of our new P-fan.
• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibrations
• Extended life span
• High-quality bearing
• PWM for synchronous fan/pump control
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Related Products
- Radiator for Intel Socket LGA 775, 1150, 1151, 1155, 1156, 1366.
- Supports AMD Socket FM1, FM2, AM3+, AM3, AM2+, AM3+.
- It has a 4Pin Temperature Controller.CPU Radiator equipped with high-performance Heat Pipes.
- Radiator with Seamless heat pipe fitting technology.
- Three years warranty by Antec.
Available on backorder
- The all-new Kraken Series features the most advanced controls ever to be included in an all-in-one liquid cooler. Through CAM’s software interface, users can fine-tune settings to ensure an optimal performance, even in the most intense gaming sessions. Everything, including the pump, radiator, and the fans, have been redesigned to bring you the greatest experience in liquid cooling, all backed by an industry-leading 6-year warranty.
- New performance engineered pump
- Includes Aer P radiator-optimized fan
- CAM Powered for complete software control
- Individually addressable RGB and infinity mirror design
- Advanced lighting modes for a fully dynamic lighting experience
- Reinforced, extended tubing for increased durability
- Industry-leading 6-year warranty
Out of stock
- Mercury240 RGB comes with 256-Color RGB LED Lights, PTFE Coated Tube, Graphite Bearings, Ultra-efficient PWM RGB LED radiator fans and provides Water Pressure of 2.3 meters High
- Model Name: Mercury120 RGB, Cooling Type: Water Cooling, Radiator Dimensions: 154 x119 x27mm, Radiator Material: Aluminium.
- Pump dimensions: 80 x 80 x 60 mm, Material: PPS, Lifespan: 50,000 hours, Connector: 4-PIN RGB & SATA power, Power Consumption: 8.1 W, Noise: ≤26dB (A), Flow rate: 3.5 L/Min
- Fan Dimensions: 120*120*25mm, Fan Type: PWM RGB LED Fan, Fan Speed: 900-1800rpm±10%, Fan Airflow73.31CFM (2.021 m3/min), Static Pressure: 2.25 mm-H20, Fan Noise: ≤ 36 dBA, Fan Lifespan: 40000 hours at 25℃ room, ambient 15-65% RH, Connector: 4-Pin, , Power Consumption: 3.6 W
- Socket Compatibility: Intel LGA 2066 / 2011-V3 / LGA2011 / LGA1366 / LGA1156 / 1155 / 1151 / 1150 / 775, TR4/ AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1 (For TR4 socket, please contact your regional distributors for more info. 5 Years Warranty When Purchased From An Authorized Antec Partner
Out of stock
- Direct Contact Technology: 4 heat pipes with Direct Contact Technology effectively provide excellent heat dissipation.
- PWM Silent Fan: Automatically controls the fan speed according to the temperature of CPU efficiently and decreases fan noise.
- Rainbow Illumination: With a vision of revolutionizing a whole new frontier of cooling performance, we introduce Ant Esports ICE-C612 with Rainbow LED PWM Fan to give you an absolute visual treat.
- Optimized Fin Design: Aluminum Fin Array with Tunnel Effect layout creates micro vortices that boost the airflow and circulate it around the heat pipes.
- High-Performance Heat Pipes: C612 is equipped with four 6mm heat pipes which are a key component for high cooling performance
Out of stock
- The PWM fan provides high airflow and stronger thermal control for the CPU.
- The super-thin CPU block not only avoids incompatibility with special heat sinks but also protects the motherboard from deforming due to the weight of the CPU cooler.
- The integration of the water pump and radiator prevents the CPU from being damaged by vibration, and it also improves the efficiency of thermal control.
- Synchronous RGB Lighting Effects
- PTFE-Coated Tubing Provides Excellent Durability & High Temperature Resistance + Nylon-Braided Tube Sheath
Out of stock
■ Integrated addressable RGB lighting for water block and fan
■ Rubber pads included on fan for lower vibration and noise
■ Includes addressable RGB controller with 10 lighting modes and ability to adjust brightness and color changing speeds.
■ Compatible with Intel LGA775/115X/1200/1366/2011/2066 and AMD AM2/AM3/AM4/FM1/FM2 sockets
Out of stock
- 1.77” color OLED for real-time system stats and personalized logos or animations
- ROG-designed radiator fans for optimized airflow and static pressure
- LiveDash one-stop control center for lighting and OLED display
- Individually addressable RGB and NCVM coating pump cover accentuates the sleek, modern aesthetics
- Styled to complement ROG motherboards, at the center stage of your build
- Reinforced, sleeved tubing for increased durability
Out of stock
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
1 in stock
Kraken X42
- The all-new Kraken Series features the most advanced controls ever to be included in an all-in-one liquid cooler. Through CAM’s software interface, users can fine-tune settings to ensure an optimal performance, even in the most intense gaming sessions. Everything, including the pump, radiator, and the fans, have been redesigned to bring you the greatest experience in liquid cooling, all backed by an industry-leading 6-year warranty.
- New performance engineered pump
- Individually addressable RGB and infinity mirror design
- CAM Powered for complete software control
- Includes Aer P radiator-optimized fan
- Advanced lighting modes for a fully dynamic lighting experience
- Reinforced, extended tubing for increased durability
- Industry-leading 6-year warranty
Out of stock
Compatibility | Intel LGA 2066/20113/2011/1366/1156/1155/1151/1150 AMD AMD TR4*/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2 *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box |
Water Block | Material: Copper |
Pump | Motor Speed: 3600 RPM Rated Voltage: 12 V & 5V Power Input: 12V – 3.9 W , 5V – 1.06 W |
Fan | Dimension: 120 x 120 x 25 mm Speed: PWM 500~1500 R.P.M (2510-4PIN) Noise Level: 25.8 dB-A Rated Voltage: 12 V & 5V Power Input: 12V- 1.44 W, 5V – 1.6W (one fan) Max. Air Flow: 56.45 CFM Max. Pressure: 1.59 mm-H2O LED Control: ARGB controller or 5V addressable RGB header on motherboard |
Radiator | Dimension: 270 x 120 x 27 mm |
Tube | Length: 326mm Material: Rubber |
Weight | 1230 g |
Out of stock
Thermaltake high performance and exceptional reliability Thermal grease
- Thermaltake
- CLO001GROSGMA
Out of stock
- Anti-leak Tech Inside liquid cooling system equipped.
- Double window panes and immersive ambient lighting ready to provide a perfect display of aesthetic illumination.
- 16.7 M true color RGB flowing light system with 5 in-built effects and 36 interchangeable lighting modes.
- Motherboard and controller Addressable RGB SYNC control supported.
- Ultra-large, pure copper CPU block provides effective coverage and heat dissipation for CPUs of any size.
- An optimized E-shaped micro water channel is designed to effectively enhance heat circulation efficiency and to enlarge heat contact areas.
- The ceramic axle bearings and axle cores guarantee an ultra-long service life.
- Supports mainstream INTEL and AMD socket mounting, including TR4/AM4.
- WS2812B ADD-RGB LED is applied and the below 3pin ADD-RGB Headers are compatible for the device: 5V/D/G and 5V/D/NC/G, which is used for the mainstream M/B brands like ASUS, MSI, Gigabyte.
Out of stock
Reviews
There are no reviews yet.