Pump/Cold Plate | |
VRM Fan | 40 mm, 1000 – 3000 RPM (Controlled by PWM) |
Pump | 800 – 2000 RPM (Controlled by PWM) |
Power Consumption | 1.0 W – 2.7 W (Pump and VRM Fan) |
Cold Plate | Copper, Micro Skived Fin |
Tube Length | 450 mm |
Tube Diameter | Outer: 12.4 mm, Inner: 6.0 mm |
Dimensions (w/o tubes) | 98 mm x 78 mm x 53 mm |
Fan x 2 | |
Fan Speed | 200 – 1800 RPM (Controlled via PWM) |
Airflow | 56.3 CFM |
Static Pressure | 2.2 mm H2O |
Current/Voltage | 0.08 A / 12 V DC |
Bearing | Fluid Dynamic Bearing |
Noise Level | 0.3 Sone |
Connector | 4-pin-Connector |
Dimensions | 120 mm x 120 mm x 25 mm |
General | |
Socket Compatibility | Intel™ 115X, 2011-3*, 2066* *Square ILM AMD™ AM4 |
Thermal Compound | MX-4 (0.8 g) |
Total Weight | 1191 g (2 Fans, Radiator, Pump, Tubes) |
Radiator | |
Material | Aluminum |
Dimensions | 277 mm x 120 mm x 38 mm |
ARCTIC Liquid Freezer II 240 – Multi Compatible All-in-One CPU Water Cooler
₹11,016.10 ₹7,838.14
- Newly developed PWM-controlled pump: the Liquid Freezer II features a completely new, PWM-controlled pump with a copper base, improved efficiency, a low power usage, and quiet operation
- Improved power efficiency: unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise If no cooling is needed, even with its additional fan for VRM cooling
- Motherboard VRM cooling fan: an additional 40 mm fan next to the pump helps to cool The motherboards VRM chips. This prevents overheating, especially when overclocking and allows continuous heavy loads
- Maintenance-free water loop: the water loop is Sealed, therefore no water or additives have to be refilled
- Integrated cable management: The PWM-cable of the fan is integrated into the sleeveless tubing. Thus fewer cables are exposed for a clean and sleek look within your case
Out of stock
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
LIQUID FREEZER II 240
Specifications
LIQUID FREEZER II SERIES
At ARCTIC, we are proud of our completely new all-in-one CPU water cooler series. For the Liquid Freezer II Series, we have used our experience in CPU water cooling to develop a completely new compact water cooling pump. The new pump of the Liquid Freezer II Series ensures an ideal ratio of high CPU cooling performance to low noise levels.
The CPU AiO water cooler has integrated cable management within fully sleeved tubes for a clean look in your PC’s case. Our powerful P-fans provide a fast heat transfer thanks to their high static pressure and outstanding performance.
We recommend the Liquid Freezer II Series, an all-in-one CPU water cooler for those looking for superior performance and low noise level at a fair price.
NEWLY DEVELOPED IN-HOUSE PWM-CONTROLLED PUMP
The Liquid Freezer II Series features an all-new, in-house developed PWM-controlled pump with a copper base, improved efficiency, low power usage, and quiet operation.
Unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise if no cooling is needed, even with its additional fan for VRM cooling.
MOTHERBOARD VRM COOLING FAN
An additional 40 mm fan next to the pump helps to cool the motherboard‘s VRM chips. This prevents overheating, especially when overclocking, and allows for continuous heavy loads.
MAINTENANCE-FREE WATER LOOP
The water loop is sealed, therefore no water or additives have to be refilled.
P-FAN FOR INCREASED PERFORMANCE
The Liquid Freezer II benefits of all advantages of our new P-fan.
• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibrations
• Extended life span
• High-quality bearing
• PWM for synchronous fan/pump control
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Related Products
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
2 in stock
- Unique LED Riing design
- High static pressure fan blade
- High-quality hydraulic bearing
- Low noise design
Out of stock
- Designed for Extreme Performance
- Diamond powder included for improved thermal conductivity
- Longer lifespan over standard silicon-based compounds
- Easy to apply
- TG-7 Thermaltake high performance and reliable Thermal grease with diamond powder
- 1 Year Warranty
Out of stock
- High performance pump with silent design to power the efficient liquid circulation
- Big size copper base to transfer heat fastly
- High-quality EPDM rubber tube to offer a better liquid flow channel
- 240mm Aluminium fins array optimized for a lower fan speed and noise, also the
- standard mounting holes built-in easy to change new 120mm fan
- Fan built-in RGB lighting system, both cable controller and motherboard with RGB Header to control
- Compatible with the mainstream sockets of Intel&AMD processor
- Bionic LED breathing light lightening up while operating
Out of stock
- Closed Silent: High-performance pump with ultra-silent closed impeller design and a three-phase motor that allows the maximum amount of water circulation, keeping the system silent and silent.
- Intelligent fan PWM RGB LED: 30 LEDs illuminate the fans in a uniform color and brightness
- Socket Compatibility:- Intel:LGA 2066 / 2011-V3 / LGA2011 / LGA1366 / LGA1156 / 1155 / 1151 / 1150 / 775
- Socket Compatibility:- AMD:TR4/ AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1 (For TR4 socket, please contact your regional distributors for more info.)
- Lifespan:40000 hours at 25°C Room, ambient 15-65% RH, Noise Level:≤ 36 dBA, Speed:900~1800 RPM ± 10%, Type:PWM RGB LED Fan
Out of stock
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
- Concentrated Compression Blade (CCB) for high-static pressure of demanding applications such as radiators, the CCB is engineered to focus the inner weaker circle of air outwards, allowing the outer section to pressurize and compress the air.
- Wind Blocker Frame: To achieve maximum static pressure in all applications, the frame is designed to work with the CCB to reduces the blade’s noise and vibration, creating a perfect balance between power and sound.
- Hydraulic Bearing/Low-Noise Design: The hydraulic bearing self-lubricates with a high quality, friction-reducing substance which lowers operating noise and improves efficiency. The Low-Noise Cable can reduce the noise level by 24% from 24.6dBA to 18.7dBA.
- Anti-vibration Mounting System: In-mold injection anti-vibration rubber pads provide hassle-free usage for 80% protection coverage, including all four corners.
- Four colors of the Patented LED Versions Available: Ring 12 LED Series is also available with different LED versions (red, blue, green, and white), adding cooling aesthetics to the chassis.
- 3 years warranty.
- Inlet and outlet temp. are 49℃ and 44.5℃ in respective, △T= 4.5℃
Out of stock
Compatibility | Intel LGA 2066/20113/2011/1366/1156/1155/1151/1150 AMD AMD TR4*/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2 *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box |
Water Block | Material: Copper |
Pump | Motor Speed: 3600 RPM Rated Voltage: 12 V & 5V Power Input: 12V – 3.9 W , 5V – 1.06 W |
Fan | Dimension: 120 x 120 x 25 mm Speed: PWM 500~1500 R.P.M (2510-4PIN) Noise Level: 25.8 dB-A Rated Voltage: 12 V & 5V Power Input: 12V- 1.44 W, 5V – 1.6W (one fan) Max. Air Flow: 56.45 CFM Max. Pressure: 1.59 mm-H2O LED Control: ARGB controller or 5V addressable RGB header on motherboard |
Radiator | Dimension: 270 x 120 x 27 mm |
Tube | Length: 326mm Material: Rubber |
Weight | 1230 g |
Out of stock
- Mercury240 RGB comes with 256-Color RGB LED Lights, PTFE Coated Tube, Graphite Bearings, Ultra-efficient PWM RGB LED radiator fans and provides Water Pressure of 2.3 meters High
- Model Name: Mercury120 RGB, Cooling Type: Water Cooling, Radiator Dimensions: 154 x119 x27mm, Radiator Material: Aluminium.
- Pump dimensions: 80 x 80 x 60 mm, Material: PPS, Lifespan: 50,000 hours, Connector: 4-PIN RGB & SATA power, Power Consumption: 8.1 W, Noise: ≤26dB (A), Flow rate: 3.5 L/Min
- Fan Dimensions: 120*120*25mm, Fan Type: PWM RGB LED Fan, Fan Speed: 900-1800rpm±10%, Fan Airflow73.31CFM (2.021 m3/min), Static Pressure: 2.25 mm-H20, Fan Noise: ≤ 36 dBA, Fan Lifespan: 40000 hours at 25℃ room, ambient 15-65% RH, Connector: 4-Pin, , Power Consumption: 3.6 W
- Socket Compatibility: Intel LGA 2066 / 2011-V3 / LGA2011 / LGA1366 / LGA1156 / 1155 / 1151 / 1150 / 775, TR4/ AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1 (For TR4 socket, please contact your regional distributors for more info. 5 Years Warranty When Purchased From An Authorized Antec Partner
Out of stock
- SILENT LED FAN: 92mm blue LED fan for ultra-quiet operation and Straight Touch copper heatpipes provide full contact to the CPU and more efficient heat transference.
- Antec Cooler Fan has 43 x 86 mm aluminum fins offer a larger surface area for heat transference and Compatibility with Intel and AMD platforms, and the push-pin mounting system and included thermal paste make for a fast, simple installation
- Cpu Cooler Fan For Intel Socket Lga 775, 1150, 1151, 1155, 1156. and Cpu Cooler Fan For Amd Socket Fm1, Fm2 ,Am3+ ,Am3 ,Am2+ ,Am2
- Cpu Cooler Dimension : Height-122.5Mm , Length-116Mm , Breadth-80.6Mm and Cpu Cooler Fan With 9Cm High Quality Rifle Bearing Led Fan, Noiseless Cpu Cooler Fan With 20Dba
- One year Warranty from the date of invoice
Out of stock
- Especially for overclocking
- Excellent thermal conductivity
- No curing
- High long-term stability
- Not electrically conductive
- It can be used on the aluminum radiator (warning label is exclusively for Conductonaut!)
- Concentrated Compression Blade (CCB) for high-static pressure of demanding applications such as radiators, the CCB is engineered to focus the inner weaker circle of air outwards, allowing the outer section to pressurize and compress the air.
- Wind Blocker Frame: To achieve maximum static pressure in all applications, the frame is designed to work with the CCB to reduces the blade’s noise and vibration, creating a perfect balance between power and sound.
- Hydraulic Bearing/Low-Noise Design: The hydraulic bearing self-lubricates with a high quality, friction-reducing substance which lowers operating noise and improves efficiency. The Low-Noise Cable can reduce the noise level by 24% from 24.6dBA to 18.7dBA.
- Anti-vibration Mounting System: In-mold injection anti-vibration rubber pads provide hassle-free usage for 80% protection coverage, including all four corners.
- Four colors of the Patented LED Versions Available: Ring 12 LED Series is also available with different LED versions (red, blue, green, and white), adding cooling aesthetics to the chassis.
- 3 years warranty.
- Inlet and outlet temp. are 49℃ and 44.5℃ in respective, △T= 4.5℃
Out of stock
Reviews
There are no reviews yet.