Arctic P14 Max (Black)
₹2,541.53 ₹1,271.19
![](https://pcbworldtech.com/wp-content/uploads/2022/09/45.png)
Extremely Wide Speed Range
Building up on the success of the P14 PWM, ARCTIC P14 Max extends the controllable speed to an impressively wide range from 400 rpm up to 2800 rpm. This enables a quiet operation when low airflow is needed and also an unprecedented level of performance on heatsinks and radiators. The P14 Max provides a significant performance boost to existing air and water cooling solutions.
Maximum Performance — Without Compromises
The P14 Max delivers focused airflow and high static pressure, making it suitable for all scenarios. The fan is optimised for use on radiators, heat sinks, pinholes and mesh. Therefore, the P14 Max is the ideal fan for enthusiasts and professionals who are looking for maximum performance with a long service life.
0 dB Mode — Zero rpm
The fan speed can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. Thus, the P14 Max allows an incomparably dynamic adjustment of the speed, so that the airflow can be perfectly regulated for every case.
Improved Stability
The P14 Max features a closed fan wheel design. The advantage of this fan wheel combination is a pressure stability without compromise. In scenarios with high pressure resistances and higher speeds, the force effect is distributed uniformly over the entire fan wheel and enables low-vibration rotation while maintaining high static pressure.
Available on backorder
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
Arctic P14 Max (Black)
General Specification | |
Dimensions | 140 (L) x 140 (W) x 27 (H) mm |
Net Weight | 245g |
Operating Ambient Temperature | 0–40 °C |
Fan Specifications | |
Fan Speed | 400—2800 rpm (PWM controlled), 0 rpm below 3 % PWM |
Airflow | 95,00 cfm | 161,40 m³/h |
Static Pressure | 4,18 mmH2O |
Fan Bearing | Fluid Dynamic Bearing |
Typical Voltage | 12 V DC |
Startup Voltage | 3.9 V DC |
Current | 0.35 A |
Cable Length | 400mm |
Connector | 4-Pin PWM Connector |
Width | 167mm |
Height | 34mm |
Length | 167mm |
Weight | 0.303 Kg |
Warranty | 6 Years |
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Related Products
- Anti-leak Tech Inside liquid cooling system equipped.
- Double window panes and immersive ambient lighting ready to provide a perfect display of aesthetic illumination.
- 16.7 M true color RGB flowing light system with 5 in-built effects and 36 interchangeable lighting modes.
- Motherboard and controller Addressable RGB SYNC control supported.
- Ultra-large, pure copper CPU block provides effective coverage and heat dissipation for CPUs of any size.
- An optimized E-shaped micro water channel is designed to effectively enhance heat circulation efficiency and to enlarge heat contact areas.
- The ceramic axle bearings and axle cores guarantee an ultra-long service life.
- Supports mainstream INTEL and AMD socket mounting, including TR4/AM4.
- WS2812B ADD-RGB LED is applied and the below 3pin ADD-RGB Headers are compatible for the device: 5V/D/G and 5V/D/NC/G, which is used for the mainstream M/B brands like ASUS, MSI, Gigabyte.
Out of stock
- High Static Pressure Led Fan: Quiet 120 Mm Blue Led Fan (Max 77 Cfm), Straight Touch Technology: 8 Mm Thick Copper Coldplate
- Unique Heatsink Design: Two-Tiered Fin Structure Dissipates Heat Efficiently, While Aluminium Oxide Coating Prevents Oxidation
- Broad Socket Compatibility: Compatibility With The Newest Intel And AMD platforms.
- Fan: 120 mm Blue LED Fan with PWM (800 – 1.900 RPM), Airflow: Max. 77 CFM – Noise: 20.3 – 34.5 dBA
- CPU Support: Intel LGA : 775, 1150, 1151, 1155, 1156, 1366, 2011, AMD: AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+.
Out of stock
- 1.77” color OLED for real-time system stats and personalized logos or animations
- ROG-designed radiator fans for optimized airflow and static pressure
- LiveDash one-stop control center for lighting and OLED display
- Individually addressable RGB and NCVM coating pump cover accentuates the sleek, modern aesthetics
- Styled to complement ROG motherboards, at the center stage of your build
- Reinforced, sleeved tubing for increased durability
Out of stock
- The PWM fan provides high airflow and stronger thermal control for the CPU.
- The super-thin CPU block not only avoids incompatibility with special heat sinks but also protects the motherboard from deforming due to the weight of the CPU cooler.
- The integration of the water pump and radiator prevents the CPU from being damaged by vibration, and it also improves the efficiency of thermal control.
- Synchronous RGB Lighting Effects
- PTFE-Coated Tubing Provides Excellent Durability & High Temperature Resistance + Nylon-Braided Tube Sheath
Out of stock
■ Integrated addressable RGB lighting for water block and fan
■ Rubber pads included on fan for lower vibration and noise
■ Includes addressable RGB controller with 10 lighting modes and ability to adjust brightness and color changing speeds.
■ Compatible with Intel LGA775/115X/1200/1366/2011/2066 and AMD AM2/AM3/AM4/FM1/FM2 sockets
Out of stock
- SILENT LED FAN: 92mm blue LED fan for ultra-quiet operation and Straight Touch copper heatpipes provide full contact to the CPU and more efficient heat transference.
- Antec Cooler Fan has 43 x 86 mm aluminum fins offer a larger surface area for heat transference and Compatibility with Intel and AMD platforms, and the push-pin mounting system and included thermal paste make for a fast, simple installation
- Cpu Cooler Fan For Intel Socket Lga 775, 1150, 1151, 1155, 1156. and Cpu Cooler Fan For Amd Socket Fm1, Fm2 ,Am3+ ,Am3 ,Am2+ ,Am2
- Cpu Cooler Dimension : Height-122.5Mm , Length-116Mm , Breadth-80.6Mm and Cpu Cooler Fan With 9Cm High Quality Rifle Bearing Led Fan, Noiseless Cpu Cooler Fan With 20Dba
- One year Warranty from the date of invoice
Out of stock
- Unique LED Riing design
- High static pressure fan blade
- High-quality hydraulic bearing
- Low noise design
Out of stock
- Especially for overclocking
- Excellent thermal conductivity
- No curing
- High long-term stability
- Not electrically conductive
- It can be used on the aluminum radiator (warning label is exclusively for Conductonaut!)
Compatibility | Intel LGA 2066/20113/2011/1366/1156/1155/1151/1150 AMD AMD TR4*/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2 *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box |
Water Block | Material: Copper |
Pump | Motor Speed: 3600 RPM Rated Voltage: 12 V & 5V Power Input: 12V – 3.9 W , 5V – 1.06 W |
Fan | Dimension: 120 x 120 x 25 mm Speed: PWM 500~1500 R.P.M (2510-4PIN) Noise Level: 25.8 dB-A Rated Voltage: 12 V & 5V Power Input: 12V- 1.44 W, 5V – 1.6W (one fan) Max. Air Flow: 56.45 CFM Max. Pressure: 1.59 mm-H2O LED Control: ARGB controller or 5V addressable RGB header on motherboard |
Radiator | Dimension: 270 x 120 x 27 mm |
Tube | Length: 326mm Material: Rubber |
Weight | 1230 g |
Out of stock
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
1 in stock
Compatibility | Intel LGA 2066/20113/2011/1366/1156/1155/1151/1150 AMD AMD TR4*/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2 *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box |
Water Block | Material: Copper |
Pump | Motor Speed: 3600 RPM Rated Voltage: 12 V & 5V Power Input: 12V – 3.9 W , 5V – 1.06 W |
Fan | Dimension: 120 x 120 x 25 mm Speed: PWM 500~1500 R.P.M (2510-4PIN) Noise Level: 25.8 dB-A Power Input: 12V- 1.44 W, 5V – 1.6W (one fan) Rated Voltage: 12 V & 5V Max. Air Flow: 56.45 CFM Max. Pressure: 1.59 mm-H2O LED Control: ARGB controller or 5V addressable RGB header on motherboard |
Radiator | Dimension: 394 x 120 x 27 mm |
Tube | Length: 400 mm Material: Rubber |
Weight | 2250 g |
Out of stock
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
2 in stock
Reviews
There are no reviews yet.