Corsair iCUE 7000X RGB Glass Full Tower Smart Case, Black
₹36,609.32
Features:
3500X ARGB Mid-Tower PC Case
The CORSAIR 3500X ARGB Mid-Tower Glass PC Case combines builder-friendly features with a stunning wraparound glass aesthetic and three pre-installed RS120 ARGB fans.
Includes
- Wraparound glass view with removable front and side panels
- 3x Pre-installed RS120 ARGB fans
- Builder-friendly features for a high-performance custom PC
- Side, roof, and PSU fan mounting points for great cooling
- Compatible with ASUS BTF and MSI Project Zero reverse connection motherboards
BUILD WITHOUT BOUNDARIES
You don’t need a large footprint to build a decked-out PC. The 3500X accommodates most large graphics cards and CPU coolers, 360mm radiators, and even EATX motherboards – without taking up your entire desk.
For a truly immaculate build, the 3500X is compatible with ASUS BTF and MSI PROJECT ZERO motherboards, keeping your connections and cables out of sight.
INCLUDES RS ARGB PERFORMANCE FANS
Three RS ARGB fans deliver a one-two punch of great cooling and lighting – without complex connections. Daisy-chain your fans to just one 4-pin PWM connector and one +5V ARGB connector on your compatible motherboard.
RS Series fans incorporate CORSAIR Magnetic Dome bearings, AirGuide technology, and in-house fan blade development optimized for unparalleled cooling efficiency in both radiator and PC case applications.
COOLING PERFORMANCE
Strong cooling is paramount for a modern PC, and the 3500X excels with side, roof, and PSU fan mounts so you can cover all the angles. And with 360mm radiator mounting points in the side and roof, you’ll have plenty of potential for liquid cooling.
A BREEZE TO BUILD IN
With a modern design approach to a mainstream PC format, the 3500X has the convenient features to take the hassle out of your build.
Available on backorder
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
Corsair iCUE 7000X RGB Glass Full Tower Smart Case
You don’t need a large footprint to build a decked-out PC. The 3500X accommodates most large graphics cards and CPU coolers, 360mm radiators, and even EATX motherboards – without taking up your entire desk.
Specifications:
Model Number | CC-9011278-WW |
Case Height | 506 |
Case Length | 460 |
Case Width | 240 |
Color | Black |
Weight | 10.54 |
Radiator Compatibility | 120mm, 140mm, 240mm, 280mm, 360mm |
Maximum GPU Length | 410mm |
Maximum CPU Cooler Height | 170mm |
Maximum PSU Length | 180mm |
Compatible Liquid Coolers | H60, H100, H115, H150 (All Series) |
Case Size | NA |
Case Power Supply | ATX |
Case Expansion Slots | 7 Horizontal (or 4 Vertical) |
Case Front IO | (1x) USB 3.2 Gen 2 Type-C, (2x) USB 3.2 Gen 1 Type-A, (1x) Audio in/out |
Case Window | Tempered Glass |
Internal 3.5″ Drive Bays | 2 |
Internal 2.5″ Drive Bays | 2 |
Warranty | 2 Years |
Note | *** Features, Price, Specifications are subject to change without notice. |
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Related Products
Features:
The Define 7 XL sets a new standard for what you should expect from a full tower case in terms of modularity, flexibility and ease of use.
- New chassis design opens up to fully expose the case interior
- Anodized aluminum front panel with reversible dual-handed hinges
- Mount up to 18 HDD/SSDs plus five SSDs in the Storage Layout
Plenty of room for massive builds
- Use the Open Layout for more headroom and gargantuan water-cooling with radiators up to 480 mm in front or top and 280 mm in the base
- Spacious, extensively adaptable dual-layout interior easily accommodates large motherboards up to E-ATX and SSI-EEB
- Two 5.25” ODD bays can be converted to an additional front fan mount with filtered louver covering
- Ventilated PSU shroud with two-part removable cover
- Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans
Available on backorder
Features:
SYSTEM STATUS WITH A GLANCE
Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUnity software must be installed.
I/O Panel
- Including the mainstream Type-C(10Gbps) port for high-speed transfer
- Included dust plugs for dust prevention.
- Mic/Audio 2-in-1 port.
Out of stock
Features:
- Up to EATX
- 360mm GPU Support
- 360mm AIO Support In Front & Top
- Extreme Airflow
- Mesh Front
- Full Tower
The Front Mesh Panel Design and Mesh on Top, Makes it an Ideal PC Case
Mesh in Top and Front and ventilation on back and bottom, keeps the internal components and storage devices cool for prolonged heavby operations.
Motherboard Support & Component Clearence
Supports Motherboard: E-ATX, ATX, Micro-ATX, ITX
GPU Length: 360mm
CPU Cooler Height: 170mm
Multiple Drive Support
The A1858 case supports up to 4 HDD, 5 SSDs and 2 ODD providing versatile storage options for adaptable PC configurations.
Available on backorder
Features:
Temperature Display
By pressing the switch button on the I/O panel, users can glance at the temperature of the CPU and GPU on the temperature display.
The temperature display can be switched from CPU temperature to GPU temperature or turned off via the switch button.
Attention: The Antec iUinity software must be installed.
ANTEC iUnity
The Antec iUnity provides instant data on PC specs, loads, and usage.
I/O Panel
- Including the mainstream Type-C(10Gbps) port for high-speed transfer.
- Included dust plugs for dust prevention.
- Mic/Audio 2-in-1 port.
4mm tempered glass & perforated solid steel
Left panel adopts tempered glass for better PC showcase visual effects. Right solid panel is bottom-perforated to enhance heat dissipation and ventilation.
Available on backorder
- Trapezoid Shaped for Horizontal Desktop and Vertical Tower Setup
- 8 Slot Horizontal and Vertical GPU Holder
- Takes GPU Length up to 426mm
- Supports Radiators up to 360mm, and 420mm Side
- 70mm of Space for Thicker Top Radiator and Fans
- 80mm of Space for Thicker Side Radiator and Fan
- Front and Side Panoramic Tempered Glass Panels Swing Open
- Dual-chamber Chassis
- Room for PSU Length up to 180mm
- Dimensions: 490 x 310 x 495 mm
Features:
Seamless edge on front & side panel
The front and left panel employ a unique 45° beveling technique that breaks the barrier between the two pieces of glass. The extremely fine edge of the glass joint enhances the uninterrupted, panoramic, and ultra-transparent visual experience of the 270° view, allowing comprehensive showcase of high-end PC components and dazzling lighting effects.
Vertical Cooling
Can accommodate three 120mm/140mm or two 160mm fans each on top and bottom for efficient GPU cooling.
Bottom fan configuration
Comes with interchangeable fan brackets to cater to fans of different sizes.
Dual Chamber
Independent cooling for CPU/GPU on the left side & PSU/Drives on the right side.
Best Cooling Design
Support 360mm radiators on top, bottom, and side simultaneously for liquid cooling.
cavernous space for extreme liquid cooling
Top, bottom and right side all support THICK 360mm radiators, providing ultra cooling capability and efficiency.
Best Cooling Design
Up to 10 fans simultaneously.
Out of stock
Features:
Define 7 XL Dark Tempered Glass
The Define 7 XL sets a new standard for what you should expect from a full tower case in terms of modularity, flexibility and ease of use.
- New chassis design opens up to fully expose the case interior
- Anodized aluminum front panel with reversible dual-handed hinges
- Mount up to 18 HDD/SSDs plus five SSDs in the Storage Layout
Plenty of room for massive builds
- Use the Open Layout for more headroom and gargantuan water-cooling with radiators up to 480 mm in front or top and 280 mm in the base
- Spacious, extensively adaptable dual-layout interior easily accommodates large motherboards up to E-ATX and SSI-EEB
- Two 5.25” ODD bays can be converted to an additional front fan mount with filtered louver covering
- Ventilated PSU shroud with two-part removable cover
- Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans
Superlative storage possibilities
- Mount up to 18 HDD/SSDs plus five SSDs in the Storage Layout (6 HDD/SSD trays + 2 SSD brackets + 2 Multibrackets included)
- Detachable PSU cable shield and integrated cable guides with Velcro straps further simplify cable management behind the board
- Sturdy new HDD cage design with vibration damped trays
- 13 pass-through holes with ten rubber grommets and two removable covers make for clean cable routing regardless of motherboard size
Available on backorder
Features:
PANORAMIC GLASS-DUAL CHAMBER LAYOUT
With its highly sought-after panoramic glass and dual chamber layout, the CH780 WH provides both premium tempered glass panels and the undeniable aesthetics of a dual chamber setup. The lack of an A pillar removes the main obstruction to a clear and uninterrupted view of the main chamber, while the second chamber houses the less appealing cable management, drives, and power supply.
MAXIMIZED COMPATIBILITY
The ATX+ form factor of the CH780 WH case guarantees compatibility with a large range of components. This panoramic DeepCool case supports E-ATX motherboards while also having compatibility for GPUs up to 480mm in length. The dual chamber layout limits GPU mounting to the vertical position, but a PCI-e riser cable and vertical mount are included.
EXTENSIVE COOLING CAPABILITY
Fan options are plentiful, with the ability to mount nine 120mm or 140mm fans or go to the extreme and add up to four 200mm fans into the conversation. The highly modular fan rails make these configurations a reality.
The CH780 WH can also support up to three 420mm radiators simultaneously. 420mm radiators can be mounted to the top, bottom, and side of the motherboard tray. The CPU cooler height is limited to 132mm due to the internal configuration.
Available on backorder
Puts your connections within easy reach, including a USB 3.1 Type-C Port, 4x USB 3.0 port, and a combination audio/microphone jack.
Power button
4x USB 3.0 ports
USB 3.1 Type-C port
Headphone/Mic Combo Jack
Reset Button
Available on backorder
Puts your connections within easy reach, including a USB 3.1 Type-C Port, 4x USB 3.0 port, and a combination audio/microphone jack.
Power button
4x USB 3.0 ports
USB 3.1 Type-C port
Headphone/Mic Combo Jack
Reset Button
Available on backorder
Features:
Seamless edge on front & side panel
The front and left panel employ a unique 45° beveling technique that breaks the barrier between the two pieces of glass. The extremely fine edge of the glass joint enhances the uninterrupted, panoramic, and ultra-transparent visual experience of the 270° view, allowing comprehensive showcase of high-end PC components and dazzling lighting effects.
Vertical Cooling
Can accommodate three 120mm/140mm or two 160mm fans each on top and bottom for efficient GPU cooling.
Bottom fan configuration
Comes with interchangeable fan brackets to cater to fans of different sizes.
Dual Chamber
Independent cooling for CPU/GPU on the left side & PSU/Drives on the right side.
Best Cooling Design
Support 360mm radiators on top, bottom, and side simultaneously for liquid cooling.
cavernous space for extreme liquid cooling
Top, bottom and right side all support THICK 360mm radiators, providing ultra cooling capability and efficiency.
Best Cooling Design
Up to 10 fans simultaneously.
Supports 2 x 160mm fans on top / 2 x 160mm fans on bottom / 1 x 140mm fan at rear
Air intake and dust filter
TOP | Full mesh panel
RIGHT SIDE | Full mesh panel
Bottom | Full-sized pull-out dust filter
Out of stock
Unparalleled Hardware & Cooling Capabilities
Mammoth Water Cooling Support
Exclusive Tool-Less Technology
ARGB Gen2 ready with MasterPlus+ integration
No Limits.
The HAF 700 is capable of housing up to SSI-EEB motherboards (E-ATX), as well as any sized graphics cards in BOTH horizontal and vertical orientations.
Rich Connectivity
The front I/O is designed to maximize the front connectivity for most high end motherboards, featuring four USB Gen 3.1 Type A ports, a USB Gen 3.2 Type C, a 4 pin audio/mic headset jack as well as a dedicated mic jack.
Advanced Mounting Options
The unique removable top panel design allows you to effortlessly install, reach and maintain cooling components such as fans and radiators even in builds with complex custom cooling systems.
Available on backorder
Reviews
There are no reviews yet.