DEEPCOOL AK500 WH
₹5,931.36 Original price was: ₹5,931.36.₹3,855.08Current price is: ₹3,855.08.

Features:
The DeepCool AK500 WH is a high-performance single tower CPU cooler that maximizes cooling potential with a large heat sink, five advanced heat pipes, and a highly efficient 120mm FDB fan.
Prime Performance
Keep up with massive performance gains thanks to dominant cooling capacity from the AK500 WH boasting 240W of heat dissipation power to manage next generation processors. Tackle 4K gaming or high processing workloads knowing that your system is sufficiently cooled and performing at its peak.
Balanced Bidirectional Heat Pipe Technology
By optimizing the internal capillary structure and injecting a precise amount of liquid, our copper heat pipes achieve the best heat dissipation performance regardless of whether the cooler is in a vertical or horizontal case.
This perfect ratio facilitates a highly efficient phase change throughout the heat pipe and achieves lower thermal resistance across a wide TDP range.
Full DRAM Compatibility
The angled offset heat pipe design offers clear access to your DIMM slots for better compatibility with tall heat spreaders and also shows off any RGB lighting. For quad-channel motherboards, the rear slots have a clearance of 45mm.
Available on backorder
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
DEEPCOOL AK500 WH
Specifications:
Model Number | Â R-AK500-WHNNMT-G |
Product Dimensions | 127×117×158 mm |
Heatsink Dimensions |  127×90×158 mm |
Net Weight | 1040 g |
Heatpipe |  Ø6 mm×5 pcs |
Fan Dimensions | 120×120×25 mm |
Fan Speed |  500~1850 RPM±10% |
Fan Airflow | Â 68.99 CFM |
Fan Air Pressure | 2.19 mmAq |
Fan Noise |  ≤31.5 dB(A) |
Fan Connector | 4-pin PWM |
Fan Speed (with LSP) | 500~1550 RPM±10% |
Fan Airflow (with LSP) | 52.24 CFM |
Fan Air Pressure (with LSP) | 1.2 mmAq |
Fan Noise (with LSP) | ≤25.9 dB(A) |
Bearing Type | Fluid Dynamic Bearing |
Fan Connector | 4-pin PWM |
Fan Rated Voltage | 12 VDC |
Fan Rated Current | 0.12 A |
Fan Power Consumption | Â 1.44 W |
Warranty | 3 Years |
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Related Products
Dual Tower Heatsink with a uniform 6 pipe
Lighting Badge
Easy Mounting System
The new SF120R Fan
Addressable RGB LED Controller
- Redesigned curved blades and frame optimizes airflow and static pressure with customizable lighting
- Included Mini ARGB controller gives you versatility for your favorite color arrays.
- Stacked fin array provides low airflow resistance allowing cooler air flow through the heatsink
- Direct Contact Technology using 4 copper heat pipes deliver exceptional heat dissipation
Available on backorder
Buckle installation, easy to install and remove; applies for both Intel and AMD systems
Quick disassembling fan stand, easy to install and disassemble
high performance, provide high airflow with low sound
Large aluminum fin tower to increase the cooling performance
Direct contact to heat pipes for continuous contact between CPU and cooler
Available on backorder
- Sporting four heatpipes, a surface area of more than 3800cm² and two premium grade 92mm fans, the NH-U9DX i4 provides a significant upgrade in quiet cooling performance compared to common 2U solutions. At the same time, its 125mm height makes it fully compatible with standard 4U cases.
- The award-winning NF-B9 92mm premium fan features Noctua’s renowned SSO bearing as well as advanced aerodynamic optimisations such as Bevelled Blade Tips and Vortex-Control Notches. In order to achieve its superb quiet cooling capability, the NH-U9DX i4 comes equipped with two NF-B9 fans in a push/pull setup.
- The NF-B9 92mm fans supplied with the NH-U9DX i4 support PWM for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1600 to 1300rpm using the supplied Low-Noise Adaptors for even quieter operation.
- Noctua’s SecuFirm2 mounting systems have become synonymous with quality, safety and ease of use. Supporting Intel’s LGA2011 (both Square and Narrow ILM), LGA2066, LGA1356 and LGA1366 Xeon platforms, the SecuFirm2 mounting included with the NH-U9DX i4 guarantees perfect contact pressure and maximum convenience on all sockets.
- Having received more than 100 awards and recommendations from hardware journalists around the world, Noctua’s NT-H1 is a proven professional grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability.
Out of stock
CDC 2.0
Dual MasterFan RGB
Unique Top Cover Design
Wired RGB Controller
- Fanless heatsink for 100% silent cooling through natural convection (see setup guidelines & list of recommended cases) or semi-passive setups with virtually inaudible NF-A12x25 LS-PWM fan (optional)
- 100% RAM compatibility on AMD AM4 and Intel LGA1700/1200, clears the top PCIe slot on most ATX and µATX motherboards
- Professional, Torx-based SecuFirm2+ mounting system for Intel LGA1700, LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156), LGA20xx (LGA2066, LGA2011-0, LGA2011-3) & AMD AM4, AM3(+), AM2(+), FM2(+), FM1
- Further improved second-generation NT-H2 thermal compound for optimal overall cooling performance
- Recommended for CPUs with low to moderate heat dissipation (see CPU compatibility list), e.g. Intel 12900, 12700, 12600 or AMD Ryzen 5600X, 4750G, 4650G, 3400G, etc.
Out of stock
- A perfect combination of RGB fan and gaming style heatsink.
- *RGB lighting system controlled by RGB SYNC motherboard software.
- Unique black top-cover designed for gaming sense only.
- Optimized mounting kit with enhanced backplate and clips for easy installation and improved durability.
- Solid 0.4-mm fins & 4 heatpipes for highly efficient heat transfer.
- 120 mm RGB fan with vibration-eliminating rubber pad and PWM for low-noise operations.
- Attention:this function is ONLY applied for RGB Header on Motherboard which owns RGB SYNC function.
Out of stock
The legendary Hyper air cooler is back and better than before. The Hyper 212 RGB Black Edition offers better installation and great performance, easily one of the best air cooling solutions. The aluminum top cover and nickel plated jet black fins, give the Hyper 212 RGB Black Edition a premium aesthetic appeal. The sleek jet black not only makes it look great, but also increase cooling performance.
Compatible with Intel LGA 115X sockets.
60mm super thin design perfectly fits All-in One systems or limited form factor cases.
Aluminum fins provide excellent heat dissipation.
120mm diameter fan with long life expectancy, durable materials, strong airflow, and low noise output.
Out of stock
New Generation Dual Chamber Pump
Enlarged Surface Area on Radiator
New SickleFlow 120 ARGB
Reinforced Sealing for Anti-Leaking Prevention
Out of stock
Four direct contact heat pipes for continuous contact between CPU and cooler
Upgradable to dual fans with quick snap fan bracket
Wide-range PWM fan with unique blade design and red LEDs
Versatile all-in-one mounting solution for Intel and AMD sockets
Optimized bracket design for easy installation
- TOUGHAIR 510 is a single tower duel fan designed air cooler with 4 heat pipes running through the fins, the U-shape heat pipes increase heat circulation creating better heat dissipation in your system and supports up
- TOUGHAIR series utilizes high static pressure fans, which leverages the TOUGHFAN 12 design and boosts the fan speed to 2000 RPM, providing a new level of cooling performance to our CPU cooler.
- 4 x Ø6 mm heat pipes directly touch the CPU and thermal paste, providing direct and outstanding heat dissipation to the CPU.
- Asymmetric Fin Structure
Out of stock
Reviews
There are no reviews yet.