DEEPCOOL LT360 A-RGB WH
₹15,253.39 ₹10,592.37
Features:
LT360 WH ARGB
The LT360 WH ARGB is a high-performance liquid CPU cooler that has been upgraded to DeepCool’s chart-topping 5th generation pump and provides strong heat dissipation power with a 360mm radiator, three precision-tuned FD12 ARGB fans, and a multidimensional infinity mirror top cap, presented in a clean all-white design.
5th GENERATION PUMP
Built on DeepCool’s new 5th generation high-performance water pump design that maximizes cooling performance and features:
- Further optimization of microchannels to ensure efficient coolant flow.
- A powerful three-phase 6-slot 4-pole drive motor rotates up to 3400 RPM.
- A thick, solid copper coldplate.
EXCEPTIONAL BY DESIGN
Optimized white FD12 ARGB PWM fans are included with the LT360 WH ARGB and have been fine-tuned to provide excellent cooling performance with a long-life Hydro Bearing. The LT360 WH ARGB includes three of these specialized FD12 fans, which have an easy-to-manage 8-pin cable that can be chained to each of the FD fans.
Available on backorder
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
DEEPCOOL LT360 A-RGB WH
Specifications:
 Model Number | R-LT360-WHAMNC-G-1 |
 Net Weight | 1856 g |
 Radiator Dimensions | 402×120×27 mm(L×W×H) |
 Radiator Material |  Aluminum |
 Tube length |  410 mm |
 Pump Dimensions |  94×80×68 mm(L×W×H) |
 Pump Speed |  3400 RPM±10% |
 Pump Connector |  3-pin |
 Pump Rated Voltage |  12 VDC |
 Pump Rated Current |  0.35 A |
 Pump Power Consumption |  4.2 W |
 Fan Dimensions |  120×120×25 mm(L×W×H) |
 Fan Speed |  600~2400 RPM±10% |
 Fan Airflow |  72.04 CFM |
 Fan Air Pressure |  3.48 mmAq |
 Fan Noise |  ≤38.71 dB(A) |
 Fan Connector |  4-pin PWM |
 Bearing Type |  Hydro Bearing |
 Fan Rated Voltage |  12 VDC |
 Fan Rated Current |  0.22 A |
 Fan Power Consumption |  2.64 W |
 LED Type |  Addressable RGB LED |
 LED Connector |  3-pin(+5V-D-G) |
 LED Rated Voltage |  5 VDC |
 LED Power Consumption | 3.15 W(PUMP)/ 3.15 W(FAN×3) |
 Warranty |  5 Years |
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Related Products
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
- NEW DEVELOPED PWM-CONTROLLED PUMP: The Liquid Freezer II features a completely new, PWM-controlled pump with a copper base, improved efficiency, a low power usage and quiet operation
- IMPROVED POWER EFFICIENCY: Unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise if no cooling is needed, even with its additional fan for VRM cooling
- MOTHERBOARD VRM COOLING FAN: An additional 40 mm fan next to pump helps cooling the motherboards VRM chips. This prevents overheating, especially when overclocking and allows continous heavy loads
- MAINTENANCE-FREE WATER LOOP: The water loop is sealed, therefore no water or additives have to be refilled
- INTEGRATED CABLE MANAGEMENT: The PWM-cable of the fan is integrated into the sleeveless tubing. Thus fewer cables are exposed for a clean and sleek look within your case
Out of stock
- Supports Intel LGA 2066/2011 3/2011/1366/1156/1155/1151/1150
- Supports AMD TR4/AM4/FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 (CPU Socket)
- 12 Separately Controlled RGB LEDs for unrivaled Lighting Control
- Patented Ring Plus RGB Software Enabled : Changes the light modes, colors, speeds, brightness, fan speeds, and even supports AI voice control in iOS and Android devices
- 240 mm High Efficiency Radiator with Push/Pull Mounting Support
- Exclusive RGB LED Water block, which has 6 LED’s and doubles to match the 12 LED from fans to offer same “Look”
- Simple Setup
- Tt LCS Certified: Liquid Cooling Supported; Compatible with extreme liquid cooling configurations
Out of stock
- NEWLY DEVELOPED PWM-CONTROLLED PUMP: The Liquid Freezer II features a completely new, PWM-controlled pump with a copper base, improved efficiency, low power usage, and quiet operation.
- IMPROVED POWER EFFICIENCY: Unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise if no cooling is needed, even with its additional fan for VRM cooling.
- MOTHERBOARD VRM COOLING FAN: An additional 40 mm fan next to the pump helps cooling the motherboards VRM chips. This prevents overheating, especially when overclocking and allows continous heavy loads.
- MAINTENANCE-FREE WATER LOOP: The water loop is sealed, therefore no water or additives have to be refilled
- INTEGRATED CABLE MANAGEMENT: The PWM-cable of the fan is integrated into the sleeveless tubing. Thus fewer cables are exposed for a clean and sleek look within your case
Out of stock
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
2 in stock
- The all-new Kraken Series features the most advanced controls ever to be included in an all-in-one liquid cooler. Through CAM’s software interface, users can fine-tune settings to ensure an optimal performance, even in the most intense gaming sessions. Everything, including the pump, radiator, and the fans, have been redesigned to bring you the greatest experience in liquid cooling, all backed by an industry-leading 6-year warranty.
- New performance engineered pump
- Includes Aer P radiator-optimized fan
- CAM Powered for complete software control
- Individually addressable RGB and infinity mirror design
- Advanced lighting modes for a fully dynamic lighting experience
- Reinforced, extended tubing for increased durability
- Industry-leading 6-year warranty
Out of stock
- All-in-one 360mm liquid cooler with PWM fan that supports 5V RGB capable motherboards
- More Effective than Air Cooler
- ARGB Sync with Motherboard
Out of stock
ï¿ Integrated addressable RGB lighting for water block and fan
ï¿ Rubber pads included on fan for lower vibration and noise
ï¿ Includes addressable RGB controller with 10 lighting modes and ability to adjust brightness and color changing speeds.
ï¿ Compatible with Intel LGA775/115X/1200/1366/2011/2066 and AMD AM2/AM3/AM4/FM1/FM2 sockets
Out of stock
- Only 50mm Thick. Thermal Paste Pre-Applied. Tool-Free Installation.
- Intelligent PWM Fan. 0.28mm Wall Thickness.
- New Formula thermal paste utilizes new polymer materials.
- Teflon Coated Tubing – a benchmark of quality that surpasses the standard.
- Full Ceramic Bearing Shaft – Increased Durability And Silent Operation.
Out of stock
ASUS ROG-RYUJIN-360 Motherboard Accessory
ROG Ryujin 360 all-in-one liquid CPU cooler with LiveDash color OLED, Aura Sync RGB and 3x Noctua iPPC 2000 PWM 120mm radiator fansFeatures
- 1.77†color OLED for real-time system stats and personalized logos or animations
- Embedded microfan helps to cool VRM and M.2 area by up to 20°C
- Quality Noctua Industrial PPC PWM fans deliver high airflow and minimal noise
- LiveDash one-stop control center for lighting and OLED display
- Individually addressable RGB and NCVM coating pump cover accentuates the sleek, modern aesthetics
- Styled to complement ROG motherboards, at the center stage of your build
- Reinforced, sleeved tubing for increased durability
ROG Ryujin is the flagship all-in-one cooler for high-end builds designed to deliver the best thermal performance. Featuring Noctua Industrial PPC fans for cooler and quieter operation, plus an embedded fan in the pump housing for additional cooling to the VRM and M.2, ROG Ryujin keeps your system running its absolute best. Coupled with a LiveDash OLED that displays system stats or custom graphics and Aura Sync RGB lighting, ROG Ryujin is the ultimate thermal solution destined to become a vital part of your gaming rig.
Out of stock
Compatibility | Intel LGA 2066/20113/2011/1366/1156/1155/1151/1150 AMD AMD TR4*/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2 *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box |
Water Block | Material: Copper |
Pump | Motor Speed: 3600 RPM Rated Voltage: 12 V & 5V Power Input: 12V – 3.9 W , 5V – 1.06 W |
Fan | Dimension: 120 x 120 x 25 mm Speed: PWM 500~1500 R.P.M (2510-4PIN) Noise Level: 25.8 dB-A Rated Voltage: 12 V & 5V Power Input: 12V- 1.44 W, 5V – 1.6W (one fan) Max. Air Flow: 56.45 CFM Max. Pressure: 1.59 mm-H2O LED Control: ARGB controller or 5V addressable RGB header on motherboard |
Radiator | Dimension: 270 x 120 x 27 mm |
Tube | Length: 326mm Material: Rubber |
Weight | 1230 g |
Out of stock
- Newly developed PWM-controlled pump: the Liquid Freezer II features a completely new, PWM-controlled pump with a copper base, improved efficiency, a low power usage, and quiet operation
- Improved power efficiency: unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise If no cooling is needed, even with its additional fan for VRM cooling
- Motherboard VRM cooling fan: an additional 40 mm fan next to the pump helps to cool The motherboards VRM chips. This prevents overheating, especially when overclocking and allows continuous heavy loads
- Maintenance-free water loop: the water loop is Sealed, therefore no water or additives have to be refilled
- Integrated cable management: The PWM-cable of the fan is integrated into the sleeveless tubing. Thus fewer cables are exposed for a clean and sleek look within your case
Out of stock
Reviews
There are no reviews yet.