THERMALRIGHT TR-M.2 HR-10 2280 SSD
Thermalright has launched the HR-10 2280, a successor to the HR-09 2280 and HR-09 2280 Pro passive M.2 SSD coolers.
Dimensions of 90.3mm (L) x 23.7mm (W) x 43.8mm (H), put it between the 48mm HR-09 2280 and the 74mm HR-09 2280 PROin terms of overall height. Like the non-Pro HR-09, this new model has a top cover featuring Thermalright’s logo alongside some grey accents and a nickel-plated finish throughout.
Similarities end there as the new HR-10 boasts two 5mm heat pipes instead of a single 6mm and a denser fin stack made of 44 pieces against 32 on the HR-09, thus pushing its weight by an extra 5g to a total of 85g. The design is simpler with a square/rectangular shape instead of the flame-looking fins of the HR-09.
If we refer back to previous models, this one should also come with pre-applied thermal pads on the top and bottom, meaning users only need to pull the protective plastic before sandwiching their SSD between the two parts and securing using four included screws. Installation shouldn’t take more than 5min.
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
THERMALRIGHT TR-M.2 HR-10 2280 SSD
While the brand didn’t indicate any performance numbers, this ‘little’ cooler should be able to handle any SSD, and at the very least ought to alleviate the growing concern surrounding super-fast, hot-running PCIe 5.0 beasts.
The good news for performance enthusiasts is that cooling such drives won’t break the bank. The HR-10 2280 M.2 SSD cooler retails at around $14 backed by a six-year warranty.
Specifications:
Dimension:L90.3 mm x W23.7 mm x H43.8 mm
Weight:85g
Heat pipes:5 mm heatpipe x 2 units
Warranty:6 years
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Related Products
Long and flexible
58 cm in length and flexible material make it easy for cable routing. Keep it effortless and hassle free.
Daisy-chaining capability
1-to-3 ways splitting for your freedom to connect multiple RGB fans or LED strips. By daisy-chaining them the possibility increases even more.
Reliability
Beyond the look , we provide quality. With highquality material , keep your build flawless and reliable
5-pin and 4-pin RGB header compatibility
Special design connectors make it compatible with both 4-pin RGB header and 5-pin RGBW header without requiring any adapter.
Out of stock
Ultra Durable PCB
Heavy duty shielding
Gold pin connections
Protective ABS casing
Stainless steel-reinforced PCI slot
Ultra-flexible cable sleeves
Out of stock
- 192kHz/24-bit, 5.1-channel playback and 300ohm headphone amp for enhanced bass and clear, detailed sound
- Hi-fidelity, immersive sound with a 116dB signal-to-noise ratio (SNR)
- Xonar Audio Center software provides a user-friendly experience via an inviting and intuitive interface
- Exclusive Hyper Grounding Technology ensures effective noise-blocking, and reduced audio distortion and cross-over interference
Out of stock
- Two RGB Light strips
- Cable Management
- Power Strip Holder
- Waterproof Gaming Mouse Mat
- Steel Frame Construction
Out of stock
The Wired RGB Controller C10L is a compact size LED controller that allows users to easily customize their RGB fans and other devices without the need for an RGB capable motherboard. With six pre-set modes and seven different single colors options, you can have the colorful rig you’ve always wanted with quick, simple installation at an affordable price.
Out of stock
- USB-Câ„¢ 3.2 Gen 2 for speeds of up to 10 Gbps
- Supports M.2 PCIe NVM Express® SSD with 2230/2242/2260/2280 form factor
- Innovative, easy-to-use screwdriver-free installation
- Aluminum alloy case and thermal pads deliver aggressive heat dissipation
- Exclusive hanging protective holder included
- Dual USB-C to C and USB-C to A cables included
- Futuristic design features ASUS Aura Sync lighting effects
Available on backorder
Long and flexible
58 cm in length and flexible material make it easy for cable routing. Keep it effortless and hassle free.
Daisy-chaining capability
1-to-3 ways splitting for your freedom to connect multiple RGB fans or LED strips. By daisy-chaining them the possibility increases even more.
Reliability
Beyond the look , we provide quality. With highquality material , keep your build flawless and reliable
5-pin and 4-pin RGB header compatibility
Special design connectors make it compatible with both 4-pin RGB header and 5-pin RGBW header without requiring any adapter.
Out of stock
Compact and Convenient
Countless Colors and Effects
Compatible with both ARGB and RGB Devices
Thermal Detection Function
Out of stock
- Fits MasterCase 5 Series, MasterCase 6 Series, MasterCase Maker Series, and H500P Series
- Vertical VGA Graphics Card Holder Kit with Riser Cable
- Displays VGA Graphics Card for a Vertically Stand
- Easy Installation
Out of stock
Designed for our MasterCase and MasterBox ATX Series case, this MasterAccessory allows you to vertically display a graphics card at your PCI slot area to nicely showcase it. The tray is made from high quality steel and is covered with stylish metallic grey paint.
Out of stock
- Instant-on Raid Mode:Â Customize in-game audio with one click
- 124dB signal-to-noise ratio (SNR) and audiophile-grade DAC:Â Enjoy high-fidelity, immersive sound
- Sonic Studio utility:Â Take full control over loads of sound technologies via an intuitive, one-page interface
- Sonic Radar Pro:Â Lets you pinpoint the exact location of in-game sounds and enhances critical audio details like enemy footsteps for an aural advantage
- 600ohm headphone amplifier:Â For enhanced bass and clear, detailed sound
Out of stock
30cm Cable Length
16AWG Wire Type
3-Layer Protective Sleeving Design
Universal Connectors
4 Color Options
3 Year Warranty
Out of stock
Reviews
There are no reviews yet.