Thermaltake Divider 500 TG Air black
₹19,059.32 ₹12,957.63
- Divider 500 TG ARGB comes with three preinstalled 120mm 5V ARGB front fans, one 120mm standard rear fan, four durable 3mm tempered glass windows at the front, top, left, and right sides.
- Divider 500 TG ARGB Mid Tower Case is the two symmetrical triangular pieces comprised of a steel panel and tempered glass window on the left and right sides.
- Deliver 16.8 million-color RGB illumination and unparalleled ventilation.
- The extra triangular mesh panel on the right side enriches the appearance of the case as well as when building in the case.
- There are 27 RGB lighting modes to play around with when using the physical RGB button, and it’s simple to switch to motherboard control by long pressing the RGB button for three seconds.
Out of stock
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
Thermaltake Divider 500 TG Air black
The Divider 500 TG Air is an ATX mid-tower case that comes with one 120mm standard front fan, one 120mm standard rear fan, two airflow-optimized mesh panels at the front and top, two durable 3mm tempered glass windows on the left and right sides. Additionally, the case comes with two symmetrical triangular panels one in tempered glass and the other in steel which are available for more options.
Divider 500 TG Air ATX Mid Tower Chassis
Thermaltake designed a brand-new case series that contains a mixture of open frame styled elements and customizable options blending all the functionalities into the Divider Series. The most exceptional feature of the Divider 500 TG Air Mid Tower Case is the two symmetrical triangular pieces comprised of a steel panel and tempered glass window on the left and right sides. These panels are tool-free and easy to remove, offering a clear view of the components inside. Extra two symmetrical triangular options of tempered glass and steel panel enriches the appearance of the case when building the system. Additionally, the air edition comes with two airflow-optimized mesh panels at the front and top for massive airflow. The Divider 500 TG Air Mid Tower Case is the next-gen gaming PC case for regular users, enthusiasts, and gamers, giving them unprecedented satisfaction.
Symmetrical Triangular Side Panels Design – Left Side
The exceptional feature of the Divider 500 TG Air is that the four symmetrical triangular pieces are mixed and matched. We provide an extra triangular tempered glass window on the left side which enriches the appearance of the case when building the system. For example, users can can stick to the default form or have two triangular tempered glass windows on the left side, creating various viewing flavors.
Cooling component options on the motherboard side:
Fans, radiators, and Thermaltake Pacific DP100-D5 Plus Distro-Plate with Pump Combo.
Symmetrical Triangular Side Panels Design – Right Side
The extra triangular mesh panel on the right side enriches the appearance of the case as well as when building in the case. For example, users can stick to the default form or have two steel panels on the right side when installing fans on the motherboard side for air intake or exhaust depending on the PC layout.
Airflow-Optimized Panels
The Divider 500 TG Air comes with two large airflow-optimized mesh panels at the front and top for massive airflow performance.
PSU Cover & Riser GPU Support Bracket
The built-in PSU cover is designed to hide unsightly cables with overall good ventilation. Riser cable bracket not only enables vertical GPU installation, but also helps reduce the weight on the PCI-E slots.
Display It Your Way
Patented rotational PCI-E slots give you the option to display your graphics card either horizontally or vertically, creating plenty of flexible space for your system.
Excellent Dust Filtration
The Divider 500 TG Air has well-designed dust filtration. All removable filters on inner right side, at the font, top, and base provide excellent dust protection and dirt reduction, ensuring a dust-free environment.
Air Intake and Exhaust
The cooling performance of the Divider 500 TG Air is supurb. Two larg mesh panels at the front and top enable massive airflow. Moreover, the gap between two triangular pieces of tempered glass and steel panels on the left side allow optimal air intake. Cooling exhausts could be located on the right side of the steel panel (two steel panels), rear, and top of case depending on user’s overall PC layout design. The additional triangular tempered glass and steel panels not only enrich the build appearance but allow more flexible system cooling.
Specification | |
P/N | CA-1T4-00M1WN-02 |
Series | Divider |
Model | Divider 500 TG Air |
Case Type | Mid Tower |
Dimension (H X W X D) | 530 x 230 x 466 mm (20.9 x 9.1 x 18.3 inch) |
Net Weight | 10.29 kg / 22.69 lbs. |
Side Panel | 3mm Tempered Glass x 2 |
Color | Black |
Material | SPCC |
Cooling System | Front(intake): 120 x 120 x 25 mm fan (1200rpm, 22 dBA) x 1
Rear(exhaust): 120 x 120 x 25 mm fan (1200rpm, 22 dBA) x 1 |
Drive Bays | 2 x 3.5”, 5 x 2.5” or 7 x 2.5” |
Expansion Slots | 7 (Rotatable Patented Design) |
Motherboards | 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
I/O Port | USB 3.2 (Gen 2) Type-C x 1, USB 3.0 x 2, HD Audio x 1 |
PSU | Standard PS2 PSU (optional) |
Fan Support | Front: 3 x 120mm, 2 x 120mm, 1 x 120mm, 3 x 140mm, 2 x 140mm, 1 x 140mm
Top: 2 x 120mm, 1 x 120mm, 2 x 140mm, 1 x 140mm Right (M/B Side): 2 x 120mm, 1 x 120mm Rear: 1 x 120mm |
Radiator Support | Front: 1 x 360mm, 1 x 240mm, 1 x 120mm, 1 x 280mm, 1 x 140mm
Top: 1 x 280mm, 1 x 140mm, 1 x 240mm, 1 x 120mm Right (M/B Side): 1 x 240mm (vertical-installed GPU recommended), 1 x 120mm Rear: 1 x 120mm |
Clearance | CPU cooler max height: 155mm (with one TG and one steel side panel) / 170mm (with two TG)
VGA max length: 360mm (with radiator) / 390mm (without radiator) PSU max length: 180mm (with HDD Cage) / 220mm (without HDD Cage) |
Warranty | 3 Year |
Note* | Price, feature and specifications are subject to change without notice |
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Related Products
- Full Metal Exterior Design. Clean interior-PSU Cover & HDDs. Tempered Glass Panel. Unique exterior design with integrated PSU cover
- Fully Equipped with Magnetic Dust Filter. Long GPU (supports up to 15.2in). Full Size PSU support. Equipped with 1x Phanteks 120mm Fans. Front I/O (2x USB 3.0, Headphone, Mic, LED Control, Reset)
- RGB Power Light + Ambient Down Light (10 colors). Integrated RGB Illumination modes + sync with RGB motherboards/Phanteks RGB products
- High Flow. 2x Front Loaded 3.5″ HDD. Supports up to 240/280mm radiator in front. 2x SSD mounting location (1x included)
- Dimension: 200 mm x 450 mm x 400 mm/7.8 in x 17.7 in x 15.7 in (WxHxD). Mid Tower. Motherboard Support: ATX, uATX, mITX, (E-ATX* – up to 275mm wide)
Out of stock
- Premium, all-steel construction with the sleek H-series design; available in four color combinations.
- Tempered glass panel showcases your build with crisp clarity .
- System installation and expansion made easy with all-new cable management system.
- Water-cooling installation simplified for both AIO and custom loop.
- The tempered glass panel and signature PSU shroud showcase beautiful builds.
- New cable routing kit with pre-installed channels and straps, on the back of the motherboard tray, for intuitive and Easy wiring.
- Upgraded, adjustable cable management bar. System installation and expansion made easy with all-new cable management system.
- Two aer F 120mm fans are included for optimal internal airflow.
- Storage Installation: single quick-release 2.5″ SSD tray positioned on the PSU shroud. There are also two 2.5″ steel trays behind the motherboard and one 3.5″ Drive cages below the shroud.
- STUNNING TEMPERED GLASS PANEL to showcase your build.
P/N |
CA-1G2-00M1WN-00 |
Case Type |
Mid Tower |
Dimension (H x W x D) |
490 x 197 x 463mm(19.3 x 7.8 x 18.2 inch) |
Net Weight |
4.6 kg / 10.1 lb |
Side Panel |
Transparent Window |
Color |
Exterior & Interior : Black |
Material |
SPCC |
Cooling System |
Rear (exhaust) :120 x 120 x 25 mm fan (1000rpm, 16dBA) |
Drive Bays |
1 x 5.25’’, 1 x 3.5”– Accessible : 3 x 3.5’’ or 2.5’’ (With HDD Tay)– Hidden : 1 x 2.5’’ (Without HDD Tay) |
Expansion Slots |
7 |
Motherboards |
6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
I/O Port |
USB 3.0 x 1,USB 2.0 x 2, HD Audio x 1 |
PSU |
Standard PS2 PSU (optional) |
Fan Support |
Front: 2 x 120mmTop: 2 x 120mmRear: 1 x 120mm |
Radiator Support |
Top: 1 x 240mmRear: 1 x 120mm |
Clearance |
CPU Cooler Height Limitation:160mmVGA Length Limitation:250mm (with HDD cage)360mm (without HDD cage)PSU length limitation:200mm |
Out of stock
- The H500 showcases the signature design of the NZXT H Series cases. The elegant all-steel construction includes the iconic cable management system to streamline building and upgrading your system. You can easily build a powerful system with plenty of options for storage and cooling. The H500 includes two Aer F* fans and a seamless tempered glass side panel.
- Premium, all-steel construction with the sleek H Series design; available in four color combinations
- Tempered glass panel showcases your build with crisp clarity
- System installation and expansion made easy with all-new cable management system
- Water-cooling installation simplified for both AIO and custom loop
Out of stock
- The H200i showcases NZXT’s vision for modern PC building. This premium mini-ITX case features a unique CAM-powered Smart Device that digitally drives RGB lighting and fan performance. You can effortlessly control RGB lighting and fans, while Adaptive Noise Reduction optimizes your build’s acoustics through machine learning and ideal fan settings. Includes two integrated Aer F fans and a RGB LED strip to enhance the aesthetics of your build as seen through the H200i’s stunning tempered glass panel.
- CAM-powered Smart Device to simplify installation and manage use of RGB lighting and fans.
- Premium, all-steel construction with the sleek H-series design; available in four color combinations.
- Tempered glass panel showcases custom RGB lighting.
- System installation and expansion made easy with all-new cable management system.
- Water-cooling installation simplified for both AIO and custom loop.
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort.
Out of stock
- Clearance for top 240mm dual radiator for water cooling solutions
- Adjustable interior pivoting 120mm / 140mm fan slot for directional air flow
- Removable HDD cage allows more room for extended video cards
- Innovative right-mounted HDD rails for easy hard drive replacement
- Single 120mm / 140mm side fan with acrylic window for interior viewing and cooling
- Two front internal USB 3.0 headers, two USB 2.0 ports, audio and microphone input
- 30W 3-step fan control for setting up your system for silence or performance
- Wire management support up to 25mm space for easy cable management
- Screw-less 5.25″ and HDD trays that secures 2.5″ SSD
- Cooling capability of up to eight fans (2 x 120mm and 1 x 140mm LED fan included)
Out of stock
- The H200 showcases the signature design introduced with the H-Series. The elegant all-steel construction embeds the iconic cable management system that streamlines building and upgrading your system. You can easily build a powerful system with plenty of options for storage and cooling. Includes two integrated Aer F fans* and a tempered glass panel to showcase your build.
- Premium, all-steel construction with the sleek H-series design; available in four color combinations.
- Tempered glass panel showcases your build with crisp clarity.
- System installation and expansion made easy with all-new cable management system.
- Water-cooling installation simplified for both AIO and custom loop.
Out of stock
Dimension : 200 mm x 450 mm x 400 mm
7.8 in x 17.7 in x 15.7 in
Form Factor : Midtower
Materials : Steel chassis, steel exterior, ABS, glass
Motherboard Support : ATX, Micro ATX, Mini ITX,
E-ATX *(up to 275mm wide)
Front I/O : 2x USB 3.0, Mic, Headphone, Reset, LED control
Side Window : Yes
Out of stock
- CAM Powered Smart Device to simplify installation and manage use of RGB lighting and fans
- Premium, all-steel construction with the sleek H-series design; available in four color combinations
- Tempered glass panel showcases custom RGB lighting
- System installation and expansion made easy with all-new cable management system
- Water-cooling installation simplified for both AIO and custom loop
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort
Out of stock
- Premium, all-steel construction with the sleek H-series design; available in four color combinations
- Tempered glass panel showcases your build with crisp clarity
- Water-cooling installation simplified for both AIO and custom loop
- System installation and expansion made easy with all-new cable management system
Out of stock
- Light up the system: 3 Pre-installed 120 millimeter 12V motherboard Sync RGB fans (Sync with as US, Gigabyte, MSI, as rock, and BIOSTAR 12V header Mob) + 1 Black fan at the back
- Built-in dual-mode 12V Sync controller: Control light via I/O port RGB Light button (16 LED modes/7 Color) or via 12V header RGB sync motherboard (Sync with as US, Gigabyte, MSI, as rock, and BIOSTAR 12V header Mob)
- 16 LED modes through I/O port RGB Light button: RGB mode, single color mode (7 Colors), breath mode (7 Colors), light off 7 Colors: red, yellow, green, cyan, blue, White, Purple]
- A clear view of PC gaming: 4 millimeter thick Tempered Glass Side panel with standard mounting
- Built-in PSU cover: Cover all your cables for a professional look combined with a window to show off your colorful power
- Drive Bays: 3 x 2.5 inches + 2 x 3.5 inches
- Supports Mini ITX, Micro ATX, and ATX motherboard
Out of stock
- The H500 showcases the signature design of the NZXT H Series cases. The elegant all-steel construction includes the iconic cable management system to streamline building and upgrading your system. You can easily build a powerful system with plenty of options for storage and cooling. The H500 includes two Aer F* fans and a seamless tempered glass side panel.
- Premium, all-steel construction with the sleek H Series design; available in four color combinations.
- Tempered glass panel showcases your build with crisp clarity.
- System installation and expansion made easy with all-new cable management system.
- Water-cooling installation simplified for both AIO and custom loop.
Out of stock
Reviews
There are no reviews yet.