LIAN LI O11 Vision Compact White

Features:
- Two top panel options: mesh or tempered glass
- Vision mode with tempered glass for an uninterrupted view of components
- Mesh mode with fan bracket for additional radiator or fan support
- Supports up to 11 fans and a maximum of 360mm large radiator
- Compatible with back-connect ATX motherboards
- Hidden AIO tube design for a streamlined appearance
- Dual-chamber layout with cable management compartment and cable holders
Unobstructed Hardware Showcase
O11 VISION COMPACT enhances your setup with its unique swappable top panels and concealed AIO tubing design, giving your chassis a standout and elegant look.
- Brushed aluminiun finish
- Inner Corner Silkscreen
- Swappable Mesh/Glass Panels
- 3mm Top Tempered Glass
- 4mm Tinted Side and Front Tempered Glass
- Concealed Cables: Simple and Elegant
Beside the rear pass-through grommet, an ATX EPS cover provides a clean BTF look. Long vertical grommets run the right side of the motherboard. The large top grommet can pass a CPU pump block, and can be removed/re-inserted for maximum clearance. Detaching the cable cover, AIO tubes slide into provided channels for a cleaner look.
Improve Intake With Reversible Bracket
The side radiator bracket can be removed for easy radiator and fan installation. Remove the thumbscrew on the right-side interior, and the bracket can be removed. The bracket can also be reversely installed for different setup configurations.
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
LIAN LI O11 Vision Compact White
Easy Cable Management
Like the O11 VISION, the O11 VISION COMPACT also comes with 2 dual-layer cable clips that slide out of their SSD-style mounting points. The clip can hold the bulk of PSU cables, while the Velcro strap on top is ideal for fan cable management. 6 additional Velcro straps, 2 above and 4 below, tidy up cables to the motherboard and storage.
Extended Room
The PSU mounting bracket, carrying over the design from the O11 VISION, protrudes 15mm from the rear of the case, allowing extra space for cable management. Additionally, a cable tie point along the rear of the case helps keep the rear I/O cables tidy.
SPECIFICATIONS:
| Model | O11 VISION COMPACT |
| Model No | O11VPW |
| Color | White |
| Dimension | (D)447.5mm x (W)287.5mm x (H)446.4mm |
| Material | Steel, 4.0mm tempered glass, 3.0mm tempered glass, Aluminium |
| Motherboard Support | Back-Connect ATX/ E-ATX (Under 280mm) / ATX / Micro-ATX / Mini-ITX |
| Case Type | Tower Chassis |
| Expansion Slot | 6+1 |
| Storage | Behind MB Tray: 2 x 2.5″ SSD Hard drive cage: 2 x 3.5″ HDD or 2.5″ SSD |
| Gpu Length Clearance | 408mm (Max.) |
| Cpu Cooler Height Clearance | 164mm (Max.) |
| PSU Support | ATX (Under 220mm) |
| Fan Support | Top: 120mm x 3 or 140mm x 2 Side: 120mm x 3 Bottom: 120mm x 3 Rear: 120mm x 2 |
| Radiator Support | Top: 240mm x 1 or 280mm x 1 or 360mm x 1 Side: 240mm x 1 or 360mm x 1 Bottom: 240mm x 1 or 360mm x 1 |
| I/O Ports | Power Button x 1 USB 3.0 x 2 USB 3.1 TYPE-C x 1 Audio x 1 |
| Dust Filter | Bottom × 1 |
| Warranty | 1 Year |
| 5 |
|
0 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
Related Products
Perforated RGB Mid-tower Case
About this item
- Black, Mid- Tower, 350 x 180 x 410 mm, Metal Left Side Panel
- 6 Expansion Slots, 5 x 3.5” Drive Bay, 5 x 2.5” Drive Bay
- I/O Panel : 2 x USB 2.0, Audio In, 1 x Mic, Reset Button, Power Button
- Fan Support : 2 x 120mm Front and 1 x 120mm Rear
- VGA Card Length : 315 mm ; CPU Cooler Height : 157 mm.
Out of stock
Features:
- Micro-ATX Back-connect motherboard compatible.
- Supports up to 360 mm AIO liquid cooler on the top.
- 270-degree panoramic tempered glass.
- Supports up to 10 x 120 mm system fans.
- Built-in 1-to-4 ARGB-PWM fans and control board, providing striking lighting and vivid lighting effects.
- The Magnetic Dust Filter at the bottom being easily removed for cleaning.
- DIY Friendly cables make your DIY process easier and create more possibilities to your system.
Available on backorder
n paralleled Hardware & Cooling Capabilities
Mammoth Water Cooling Support
Exclusive Tool-Less Technology
IRIS: Personal LCD Assistant
ARGB Gen2 ready with MasterPlus+ integration
HAF 700 EVO unveils a new era of thermal efficiency through unique features designed to transcend the standards of contemporary cooling solutions.
Rediscover PC DIY: a form of entertainment, a polished skillset, an exquisite art form, and a way of living.
Available on backorder
Removable Top Panel
Tempered Glass Side Panel
Dual Sickleflow 120 ARGB Fans
ARGB/PWM Hub
Adaptable Drive Cage
Up to 280mm Radiator Support
Postmodern Elegance
TD300 Mesh brings together modern presentation and performance with its three dimensional artistic mesh front panel. The polygonal diamond-cut facade emphasizes the illumination of two included SickleFlow PWM ARGB fans, cast various glowing effects, shifting based on the viewing angle.
Polygonal Mesh
Crafted with Cooler Master’s FineMesh technology, the polygonal mesh features a three-dimensional contour, capable of simultaneously providing high airflow and excellent dust filtration.
Sickleflow PWM ARGB Fans Included
Pre-installed with two highly acclaimed 120mm ARGB Sickleflow fans, managed by the included Hub to easily customize a comprehensive ARGB lighting system and minimize ARGB port usage on the motherboard.
ARGB/PWM Hub
The included HUB features 5 ARGB and 4 PWM ports and facilitates cable management in the system, allowing you to conveniently control fans with a single connector for power and PWM signal and another for ARGB signal.
Available on backorder
- Steel/Glass ATX Mid-Tower Design
- Extra Durable G2 0.4mm SPCC Structure
- Magnetic Anti-Dust Filter on Top
- G15 Front Panel: Plastic+Metal
- Tempered Glass Left Side Panel
- USB 3.0 for high-speed data
- Fully Optimized Airflow with Advanced Heat Dissipation System
- Dedicated SSD/HDD Bays for Improved Storage & Space Management
- Compatible with all ATX/Micro ATX Motherboards
Available on backorder
About this item
- Black, Mid-Tower, 300 x 190 x 385 mm, Front IO Panel Design
- 4 Expansion Slots, 2 HDD + 4 SSD x 3.5”/ 2.5” Drive Bay
- I/O Panel : 1x USB 3.0, 1 x USB, 1 x HD Audio, 1 x Mic, Power & Reset Button, Processing & Hard Drive Indicators
- Fan Support : 2 x 120mm / 2 x 140mm Front, 1 x 120 mm Rear
- VGA Card Length : 255 mm ; CPU Cooler Height : 160 mm.
Available on backorder
MP 520’s asymmetrical front panel design frames the pre-installed three 120mm ARGB fans as unique centerpieces on the build.
Three 120mm ARGB Fans Included
Mesh Geode Front Panel
Versatile Cooling Options
Full Black Coating & PSU Cover
Breathable Power Supply Shroud
Prime AP201 white
- Quasi-Filter Mesh Panels: A mesh design comprised of over 57,000 precision-machined 1.5mm holes increases airflow and provides a compelling view of the components within your build.
- Optimized for Cooling: With support for 280 and 360mm radiators and up to six fans, the AP201 is primed to deal with the thermal onslaught of high-performance hardware.
- Industry-Leading Spatial Efficiency: Despite a 33L footprint, the AP201 supports ATX PSUs up to 180 mm long, graphics cards up to 338 mm long, custom liquid cooling, and various storage devices.
- Tool-Free Side Panels: A simple yet secure clip mechanism allows chassis side panels to be easily removed and resistant to accidental dislodging.
- Sizeable Cable-Management: The AP201 features an extended motherboard tray with strategically placed cutouts and a 32 mm gap to tuck cables out of sight.
- Front Panel USB Type-C® Support: The front panel of the AP201 features a USB 3.2 Gen 2 Type-C port, so users can enjoy transfer speeds of up to 10 Gbps.
Available on backorder
- Dual Chamber Chassis: GT502 internals are divided into two chambers, configuring independent cooling zones for the CPU and GPU
- Panoramic View: Tempered glass panels at the front and side provide a tactfully tinted view of the main chamber and showcase your build
- Front Panel High-Speed USB Type-C: TUF Gaming GT502 front panel features a USB 3.2 Gen 2 Type-C port ripe for transfer speeds up to 10 Gbps
- Tool-Free side panels can be removed simply by pressing a button hidden on the rear of the chassis
- Fully Modular Design: Most of the panels and mounts are removable to ease hardware installation
Available on backorder
- Unique Design & Powerful Heat Dissipation
- Polygon-Shaped Frames with High-Airflow Front Panel
- Pre-Installed 4 x 120mm Fans
- Up to 6 Fans Simultaneously
- Space for cable management: 20mm
- Compatible with ATX, M-ATX, ITX motherboards
- REV-06W is by far the tallest PC case in the Revolution family




















Reviews
There are no reviews yet.