ANTEC CX300M ARGB_B
₹4,325.42 ₹3,559.32
Features:
Panoramic 270° View
Standing out with full-view design on the seamless steel-tempered glass, CX300M ARGB’s left and front panel offer an unobstructed view of your build, creating a stunning showcase for your components.
Vertical Cooling
A large amount of air is taken in through the mesh on buttom and side to facilities heat dissipation and protect hardware from overheating.
Broad AIO Support
Support 360mm radiators on the top and 240mm radiators on the side.
- When installed on the top,if there is interface,the memory height is limited to 45mm.
Eva CUSHION PADS
Equipped with anti-vibration foams on the power supply mount position,your lovely PC hardware is well protected against any jar or resonance caused by PSU operation.
Available on backorder
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
ANTEC CX300M ARGB_B
Specification:
Model | CX300m ARGB |
Color | Black |
Main Spec | |
Motherboard Support | Micro-ATX,ITX |
Form Factor | Mini Tower |
Case material | Steel + Glass |
Side&Front Panel | 4mm Tempered Glass |
I/O Panel | Power,LED On/Off,USB 2.0×2,USB 3.0×1,MC/ HD-ADIO |
Compatibility & Clearences | |
CPU Cools Max Height | 170mm |
GPU Max Length | 420mm |
Power Supply Max Length | (Include cable)< 245mm |
Cable Routing Space | 27mm |
Fan Support | |
Top | 3x120mm/2x140mm |
Side | 2x120mm |
Power Supply Shroud | 2x120mm |
Buttom | 1x120mm |
Rear | 1×120 |
Radiator Support | |
Top | 120/140/360mm(When installing water cooler on the top,if there is interference the memory height is limited to 45mm |
Side | 120/240mm |
Expansios Slots | |
Standard | 5 |
Drive Bays | |
2.5 | 1 |
3.5/2.5/ Drive Mounts | 2/1 |
Dimensions | |
Case Dimensions(DWH) | 450x219x417mm |
Box Dimensions(DWH) | 455x280x515mm |
Net Weight | 6.06KG |
GROSS WEIGHT | 7.54kg |
Accessories | |
Incuded Fan | 2x120mm Fixed mode ARGB reverse Fans on right side+1x120mm Fixed mode ARGB Fan in rear |
General | |
Dust Filter | Top/Button |
UPC | 0-761345-10098-4 |
Warranty | 1 Year |
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Related Products
- CAM Powered Smart Device to simplify installation and manage use of RGB lighting and fans
- Premium, all-steel construction with the sleek H-series design; available in four color combinations
- Tempered glass panel showcases custom RGB lighting
- System installation and expansion made easy with all-new cable management system
- Water-cooling installation simplified for both AIO and custom loop
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort
Out of stock
- Premium, all-steel construction with the sleek H-series design; available in four color combinations.
- Tempered glass panel showcases your build with crisp clarity .
- System installation and expansion made easy with all-new cable management system.
- Water-cooling installation simplified for both AIO and custom loop.
- The tempered glass panel and signature PSU shroud showcase beautiful builds.
- New cable routing kit with pre-installed channels and straps, on the back of the motherboard tray, for intuitive and Easy wiring.
- Upgraded, adjustable cable management bar. System installation and expansion made easy with all-new cable management system.
- Two aer F 120mm fans are included for optimal internal airflow.
- Storage Installation: single quick-release 2.5″ SSD tray positioned on the PSU shroud. There are also two 2.5″ steel trays behind the motherboard and one 3.5″ Drive cages below the shroud.
- STUNNING TEMPERED GLASS PANEL to showcase your build.
Item Specifics
- SERIESCORE
- TYPEMID TOWER
- 5.25″ BAYSNA
- 3.5″ BAYS2
- 2.5″ BAYS4
- EXPANSION SLOTS7
- MAX RADIATOR SUPPORT360
- MAX FAN SUPPORT6
- COLORBLACK
- SIDE PANELTRANSPARENT
- SUPPORTED GPU-37816.1
Out of stock
- The H200i showcases NZXT’s vision for modern PC building. This premium mini-ITX case features a unique CAM-powered Smart Device that digitally drives RGB lighting and fan performance. You can effortlessly control RGB lighting and fans, while Adaptive Noise Reduction optimizes your build’s acoustics through machine learning and ideal fan settings. Includes two integrated Aer F fans and a RGB LED strip to enhance the aesthetics of your build as seen through the H200i’s stunning tempered glass panel.
- CAM-powered Smart Device to simplify installation and manage use of RGB lighting and fans.
- Premium, all-steel construction with the sleek H-series design; available in four color combinations.
- Tempered glass panel showcases custom RGB lighting.
- System installation and expansion made easy with all-new cable management system.
- Water-cooling installation simplified for both AIO and custom loop.
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort.
Out of stock
- Premium, all-steel construction with the sleek H-series design; available in four color combinations
- Tempered glass panel showcases your build with crisp clarity
- Water-cooling installation simplified for both AIO and custom loop
- System installation and expansion made easy with all-new cable management system
Out of stock
Specification
Dimensions | W: 210mm H: 393mm D: 421mm (without feet)
W: 210mm H: 417mm D: 421mm (with feet) |
Material(s) | SECC Steel and Tempered Glass |
Weight | 7.6 kg |
Motherboard Support | mini-ITX and microATX |
I/O Ports | 2 x USB 3.1 Gen 1
1 x Audio/Mic |
Filters | Front, Top, and PSU Intake |
Expansion Slots | 4 |
Drive Bays | 2.5”: 3+1
3.5”: 1 |
Radiator Support | Front: 2 x 140 or 2 x 120mm with Push/Pull
Rear: 1 x 120 |
Fan Support | Front: 2 x 120/2 x 140mm (2 Aer F120 Case Version included)
Top: 2 x 120/2 x 140mm Rear: 1 x 120mm (1 Aer F120 Case Version included) |
Fan Specs | Aer F120 (Case Version)
Speed: 1200 + 200 RPM Airflow: 50.42 CFM Noise: 28 dBA Bearing: Rifle Bearing |
Clearance | Cable Management: 18-22mm
GPU Clearance: Up to 411mm CPU Cooler: Up to 164mm Front Radiator: 60mm |
Warrantty | 2 Years |
Out of stock
- The H200i showcases NZXT’s vision for modern PC building. This premium mini-ITX case features a unique CAM-powered Smart Device that digitally drives RGB lighting and fan performance. You can effortlessly control RGB lighting and fans, while Adaptive Noise Reduction optimizes your build’s acoustics through machine learning and ideal fan settings. Includes two integrated Aer F fans and a RGB LED strip to enhance the aesthetics of your build as seen through the H200i’s stunning tempered glass panel.
- CAM-powered Smart Device to simplify installation and manage use of RGB lighting and fans.
- Premium, all-steel construction with the sleek H-series design; available in four color combinations.
- Tempered glass panel showcases custom RGB lighting.
- System installation and expansion made easy with all-new cable management system.
- Water-cooling installation simplified for both AIO and custom loop.
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort.
Out of stock
- Clearance for top 240mm dual radiator for water cooling solutions
- Adjustable interior pivoting 120mm / 140mm fan slot for directional air flow
- Removable HDD cage allows more room for extended video cards
- Innovative right-mounted HDD rails for easy hard drive replacement
- Single 120mm / 140mm side fan with acrylic window for interior viewing and cooling
- Two front internal USB 3.0 headers, two USB 2.0 ports, audio and microphone input
- 30W 3-step fan control for setting up your system for silence or performance
- Wire management support up to 25mm space for easy cable management
- Screw-less 5.25″ and HDD trays that secures 2.5″ SSD
- Cooling capability of up to eight fans (2 x 120mm and 1 x 140mm LED fan included)
Out of stock
- CAM Powered Smart Device to simplify installation and manage use of RGB lighting and fans
- Premium, all-steel construction with the sleek H-series design; available in four color combinations
- Tempered glass panel showcases custom RGB lighting
- System installation and expansion made easy with all-new cable management system
- Water-cooling installation simplified for both AIO and custom loop
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort
Out of stock
- The H400i showcases NZXT’s vision for modern PC building. This premium micro-ATX case features a unique CAM-powered Smart Device that digitally drives RGB lighting and fan performance. You can effortlessly control RGB lighting and fans, while Adaptive Noise Reduction optimizes your build’s acoustics through machine learning and ideal fan settings. Includes three integrated Aer F fans and two RGB LED to enhance the aesthetics of your build as seen through the H400i’s stunning tempered glass panel.
- CAM Powered Smart Device to simplify installation and manage use of RGB lighting and fans.
- Premium, all-steel construction with the sleek H-series design; available in four color combinations.
- Tempered glass panel showcases custom RGB lighting .
- System installation and expansion made easy with all-new cable management system.
- Water-cooling installation simplified for both AIO and custom loop.
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort.
Out of stock
Item Specifics
- SERIESMPG SERIES
- TYPEMID TOWER
- 5.25″ BAYSNA
- 3.5″ BAYS2
- 2.5″ BAYS2
- EXPANSION SLOTS7
- MAX RADIATOR SUPPORT420
- MAX FAN SUPPORT7
- COLORBLACK
- SIDE PANELTRANSPARENT
Product Description
SPECIFICATIONS
PRODUCT NAME | MPG GUNGNIR 100P |
CASE FORM FACTOR | Mid-Tower |
SUPPORT MB FORM FACTOR | EATX (up to 272mm) / ATX / mATX / Mini-ITX |
DIMENSION | 510(D) x 227(W) x 525(H) mm 20.08(D) x 8.94(W) x 20.67(H) inch |
I/O PORTS | 2 x USB 3.0 + HD Audio / Mic |
DRIVER BAYS | 2 x 3.5″ (compatible with 2.5″) + 2 x 2.5″ |
CASE EXPANSION SLOTS | 7 |
MAXIMUM PSU LENGTH | 200mm |
MAXIMUM GPU LENGTH | 400mm |
MAXIMUM CPU COOLER LENGTH | 170mm |
RADIATOR COMPATIBILITY | 120 / 140 / 240 / 280 / 360 / 420mm |
POWER SUPPLY | Standard ATX |
WARRANTY | |
NOTE | ***Features, Price and Specifications are subject to change without notice. |
FEATURES
- MSI MPG GUNGNIR 100P chassis can support up to EATX motherboard, side panel of 4mm tempered glass, 120 mm SYS fan, reserved cooling space and front USB 3.1 Gen 1
- 4mm Tempered Glasses
- System Fan Included
- Optimized Air Flow
- 420mm Radiator Support
- 170mm CPU Cooler Support
- All-steel top and front panels, HDD drive trays, and chassis
- Liquid cooling support: 240mm, 280mm, 360mm Radiators (Front and Top)
- The H440 comes standard with 4 of NZXT’s newly designed FNv2 case fans: 3x 120mm in front and 1x 140mm in rear
- Motherboard support for ATX, mATX, and ITX, as well as GPUs up to 406mm
- Effortless cable management capabilities
- Integrated power supply shroud with SSD mounts
- 5mm thick closed-cell sound dampening material
- Integrated 8-port PWM fan hub
- Signature NZXT rear I/O LEDs
- Horizontally mounted 2x USB 3.0, 2x USB 2.0, HD Audio mic/headphone input
Out of stock
Reviews
There are no reviews yet.