Antec K120 AIO liquid Cooler
₹4,194.92 ₹2,966.10
- Kühler H2O K-series, our newest generation of all-in-one closed loop liquid CPU coolers, is uniquely engineered to protect your CPU’s performance and increases the life of your CPU
- Model Name: K120, Cooling Type: Water Cooling, Tube Dimensions: 8 x 10 x 315 mm. Radiator Dimensions: 169 x120 x27mm, Radiator Material: Aluminium. Intelligent PWM Fan with Blue LED
- Pump dimensions: 80 x 100 x 315 mm, Material: PTFE, Lifespan: 50,000 hours, Connector: SATA power, Water pressure: 1m±0.2m, Noise: ≤36dB (A), Flow rate: 1.5 L/Min. Teflon Coated Tubing, Intelligent PWM Fan with Silence Mode and Battle Mode.
- Fan Dimensions: 120*120*25mm, Fan Speed: 900-1800rpm±10%, Fan Airflow: 73.31CFM, Fan Noise: 20-30db (A), Fan Lifespan: 40000 hours at 25℃ room, ambient 15-65% RH, Connector: 4-Pin
- Socket Compatibility: Intel LGA 2066 / 2011-V3 / LGA2011 / LGA1366 / LGA1156 / 1155 / 1151 / 1150 / 775, AMD AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1. 3 Years Warranty When Purchased From An Authorized Antec Partner
Out of stock
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
Antec K120 AIO Liquid Cooler
The Kühler H2O K-series, our newest generation of all-in-one closed-loop liquid CPU coolers, is uniquely engineered to protect your CPU’s performance, increase the life of your CPU and ensure that you can count on its performance for years to come.
0.28mm Wall
Thickness17FPI
Hot and cold conversion efficiency,
double the cooling effect compatibility.
Teflon Coated Tubing
Teflon coated tubing is tested to last up to 15 years – a benchmark of quality that surpasses the standard.
SPECIFICATIONS
Model Name | K120 | |
---|---|---|
Cooling Type | Water Cooling | |
Fan | Dimensions | 120*120*25mm |
Speed | 900-1800rpm±10% | |
Airflow | 73.31CFM | |
Noise | 20-30db (A) | |
Lifespan | 40000 hours at 25℃ room, ambient 15-65% RH | |
Connector | 4 pin | |
Radiator | Dimensions | 169*120*27mm |
Material | Aluminum | |
Pump | Dimensions | 60*60*31 mm |
Material | PTFE | |
Connector | SATA power | |
Water Pressure | 1m±0.2m | |
Flow rate | 1.5L/min | |
Lifespan | 50000 hours at 25℃ room, ambient 15-65% RH | |
Noise | ≤36dB (A) | |
Tube | Dimensions | 8*10*315 mm |
Socket Compatibility | Intel | LGA 2066 / 2011-V3 / LGA2011 / LGA1366 / LGA1156 / 1155 / 1151 / 1150 / 775 |
AMD | AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1 | |
Warranty | 3 Years | |
UPC# | 0-761345-74015-9 |
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Related Products
Compatibility | Intel LGA 2066/20113/2011/1366/1156/1155/1151/1150 AMD AMD TR4*/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2 *AIO Cooler bracket adapter comes in the AMD Threadripper CPU box |
Water Block | Material: Copper |
Pump | Motor Speed: 3600 RPM Rated Voltage: 12 V & 5V Power Input: 12V – 3.9 W , 5V – 1.06 W |
Fan | Dimension: 120 x 120 x 25 mm Speed: PWM 500~1500 R.P.M (2510-4PIN) Noise Level: 25.8 dB-A Rated Voltage: 12 V & 5V Power Input: 12V- 1.44 W, 5V – 1.6W (one fan) Max. Air Flow: 56.45 CFM Max. Pressure: 1.59 mm-H2O LED Control: ARGB controller or 5V addressable RGB header on motherboard |
Radiator | Dimension: 270 x 120 x 27 mm |
Tube | Length: 326mm Material: Rubber |
Weight | 1230 g |
Out of stock
- NEWLY DEVELOPED PWM-CONTROLLED PUMP: The Liquid Freezer II features a completely new, PWM-controlled pump with a copper base, improved efficiency, low power usage, and quiet operation.
- IMPROVED POWER EFFICIENCY: Unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise if no cooling is needed, even with its additional fan for VRM cooling.
- MOTHERBOARD VRM COOLING FAN: An additional 40 mm fan next to the pump helps cooling the motherboards VRM chips. This prevents overheating, especially when overclocking and allows continous heavy loads.
- MAINTENANCE-FREE WATER LOOP: The water loop is sealed, therefore no water or additives have to be refilled
- INTEGRATED CABLE MANAGEMENT: The PWM-cable of the fan is integrated into the sleeveless tubing. Thus fewer cables are exposed for a clean and sleek look within your case
Out of stock
- NEW DEVELOPED PWM-CONTROLLED PUMP: The Liquid Freezer II features a completely new, PWM-controlled pump with a copper base, improved efficiency, a low power usage and quiet operation
- IMPROVED POWER EFFICIENCY: Unlike most pumps from our competitors, which run at full load even when idle, our pump clocks down consuming less power and producing less noise If no cooling is needed
- MOTHERBOARD VRM COOLING FAN: An additional 40 mm fan next to pump helps cooling The motherboards VRM chips. This prevents overheating, especially when overclocking and allows continuous heavy loads
- MAINTENANCE-FREE WATER LOOP: The water loop is Sealed therefore no water or additives have to be refilled
- INTEGRATED CABLE MANAGEMENT: The PWM-cable of the fan is integrated into the sleeveless tubing. Thus fewer cables are exposed for a clean and sleek look within your case
Out of stock
ï¿ Integrated addressable RGB lighting for water block and fan
ï¿ Rubber pads included on fan for lower vibration and noise
ï¿ Includes addressable RGB controller with 10 lighting modes and ability to adjust brightness and color changing speeds.
ï¿ Compatible with Intel LGA775/115X/1200/1366/2011/2066 and AMD AM2/AM3/AM4/FM1/FM2 sockets
Out of stock
ï¿ Integrated addressable RGB lighting for water block and fan
ï¿ Rubber pads included on fan for lower vibration and noise
ï¿ Includes addressable RGB controller with 10 lighting modes and ability to adjust brightness and color changing speeds.
ï¿ Compatible with Intel LGA775/115X/1200/1366/2011/2066 and AMD AM2/AM3/AM4/FM1/FM2 sockets
Out of stock
- Strong Torque, Sealed silent pump, Temperature Reactive LED, Ceramic axis + Graphite bearings increase the operational lifespan of the Mercury series
- Fan Dimensions: 120 x 120 x 25 mm, Type: PWM Blue LED Fan+Temperature indicating LED, Speed: 900~1800 RPM ± 10%, Airflow: 73.31CFM (2.021 m3/min)
- Noise Level: ≤ 30 dBA, Static Pressure: 2.25 mm-H20, Connector: 4-Pin, Power Consumption: 3.6W, Radiator Dimensions: 154 x 119 x 27 mm, Material: Aluminum
- Pump Dimensions: 80x 80x 60mm, Material: PTFE, Lifespan: 50,000 hours, Connector: 3-Pin or SATA power, Power Consumption: 5.4W, Flow rate: 3.5 L/Min
- Socket Compatibility: Intel LGA 2066 / 2011-V3 / LGA2011 / LGA1366 / LGA1156 / 1155 / 1151 / 1150 / 775, AMD TR4/ AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1
Out of stock
Kraken X42
- The all-new Kraken Series features the most advanced controls ever to be included in an all-in-one liquid cooler. Through CAM’s software interface, users can fine-tune settings to ensure an optimal performance, even in the most intense gaming sessions. Everything, including the pump, radiator, and the fans, have been redesigned to bring you the greatest experience in liquid cooling, all backed by an industry-leading 6-year warranty.
- New performance engineered pump
- Individually addressable RGB and infinity mirror design
- CAM Powered for complete software control
- Includes Aer P radiator-optimized fan
- Advanced lighting modes for a fully dynamic lighting experience
- Reinforced, extended tubing for increased durability
- Industry-leading 6-year warranty
Out of stock
- The refreshed Kraken X Series is a must-have for any build, providing better cooling, stunning visual effects, and intuitive installation. You can fine-tune settings with CAM’s software interface, ensuring optimal performance in even the most intense gaming sessions. The new Kraken X series maintains the customizable lighting effects and quiet performance of previous generations and adds a HUE 2 connector for even more RGB options. With a re-designed cap and larger infinity mirror ring LED, the new Kraken X delivers an amazing experience in RGB liquid cooling, backed by a 6-year warranty.
- A 10% bigger LED ring allows for more vivid RGB. A rotatable top accommodates re-orienting the logo no matter the direction the cooler is installed.
- CAM provides sophisticated controls with an intuitive, user-friendly interface. Now with better sync for lighting across all NZXT RGB devices, full CAM integration allows you to manage your Kraken’s performance with precision, making adjustments with the click of a button.
- The Aer P radiator fans are designed for liquid-cooling perfection. It features a chamfered intake and fluid dynamic bearing that provides silent operations, durability, and powerful cooling performance.
- Fine nylon mesh sleeves strengthen the rubber tubing, providing durability and protection against mishandling. Adjust the orientation of the pump head* to fit the needs of your motherboard without affecting the direction of the logo.
*The pump orientation can be changed in 30° increments to reduce interference with other components.
*Fan control is not included with the Kraken X-3 series
- High performance pump with silent design to power the efficient liquid circulation
- Big size copper base to transfer heat fastly
- High-quality EPDM rubber tube to offer a better liquid flow channel
- 240mm Aluminium fins array optimized for a lower fan speed and noise, also the
- standard mounting holes built-in easy to change new 120mm fan
- Fan built-in RGB lighting system, both cable controller and motherboard with RGB Header to control
- Compatible with the mainstream sockets of Intel&AMD processor
- Bionic LED breathing light lightening up while operating
Out of stock
- Intel LGA 2066/2011-3/2011/1366/1156/1155/1151/1150 AMD TR4/AM4/FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 (CPU Socket)
- Patented Ring Plus RGB Software Enabled
- 360mm High Efficiency Radiator with Push/Pull Mounting Support
Out of stock
- The PWM fan provides high airflow and stronger thermal control for the CPU.
- The super-thin CPU block not only avoids incompatibility with special heat sinks but also protects the motherboard from deforming due to the weight of the CPU cooler.
- The integration of the water pump and radiator prevents the CPU from being damaged by vibration, and it also improves the efficiency of thermal control.
- Synchronous RGB Lighting Effects
- PTFE-Coated Tubing Provides Excellent Durability & High Temperature Resistance + Nylon-Braided Tube Sheath
Out of stock
Compatibility | Intel LGA 2066/20113/2011/1366/1156/1155/1151/1150 AMD FM2/FM1/AM4/AM3+/AM3/AM2+/AM2 (CPU Socket) |
Water Block | Material: Copper |
Pump | Motor Speed: 3000 RPM Rated Voltage: 12 V & 5V Power Input: 12V – 3.9 W , 5V – 1.06 W |
Fan | Dimension: 120 x 120 x 25 mm Speed: PWM 500~1500 R.P.M (2510-4PIN) Noise Level: 25.8 dB-A Rated Voltage: 12 V & 5V Power Input: 12V- 1.44 W, 5V – 1.6W Max. Air Flow: 56.45 CFM Max. Pressure: 1.59 mm-H2O LED Control: ARGB controller or 5V addressable RGB header on motherboard |
Radiator | Dimension: 151 x 120 x 27 mm |
Tube | Length: 326mm Material: Rubber |
Weight | 920 g |
Out of stock
Reviews
There are no reviews yet.