ARCTIC Freezer 36

About this

• HIGH PERFORMANCE FOR HIGH-END CPUs: With its 4 staggered heat pipes, the single tower cooler enables fast heat transfer into the heatsink, where it can be efficiently dissipated by a 120 mm fan
• A-RGB ILLUMINATION: 12 digital A-RGB LEDs in the fan hub can be controlled autonomously from each other, allowing a completely free choice of color effects, such as the iconic rainbow effect
• FAST AND EASY INSTALLATION: AMD-specific design minimizes unnecessary mounting hardware, greatly simplifying installation. Compatible with AMD AM5 and AM4
• ULTIMATE PERFORMANCE THERMAL PASTE: 0.8 g of the new MX-5 is included for application. This enables a fine application thickness and it isn’t conductive or capacitive – making it simple and absolutely safe to use

High-Class Finish with Aluminium Top Plate

With its push-pull configuration, the Freezer 36 A-RGB not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.

Future-Proof Compatibility

The Freezer 36 A-RGB is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. ARCTIC customers don’t need to worry that the new CPUs will also require new coolers. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.

Improved Fan Mounting

Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 A-RGB is therefore compatible with most 120 mm fans.

LGA1851 | LGA1700 Contact Frame

Intel’s Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU’s backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.

High-Quality Bearing

Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.