DEEPCOOL ASSASSIN 4S
₹9,321.19 ₹7,117.80
Features:
The ASSASSIN 4S provides exceptional performance and is armed with seven 6mm heat pipes and a redesigned 140mm FDB fan. The 4S models eliminate the rear 120mm fan, providing a slimmer, more symmetrical cooler.
BEAUTY IN SIMPLICITY
The elegant design of the ASSASSIN 4S is not just visually pleasing; it also leads to optimal air flow and maximum compatibility.
QUIET OR PERFORMANCE MODE
With a simple slide of a switch, the ASSASSIN 4S can morph from a whisper-quiet cooler when low noise is of the utmost importance to the efficient cooling force DeepCool air coolers are known for.
LET IT SHINE!
The shell of ASSASSIN 4S is clean, sleek, and helps channel air through the fin towers, while the slimmer profile provides unobstructed clearance for high-profile RGB RAM.
Available on backorder
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
DEEPCOOL ASSASSIN 4S
Specifications:
 Model Number |  R-ASN4S-BKGPMN-G |
 Product Dimensions |  116×147×164 mm(L×W×H) |
 Heatsink Dimensions |  140×110×160 mm(L×W×H) |
 Net Weight |  1380 g |
 Heatpipe |  Ø6 mm×7 pcs |
 Fan Dimensions |  140×140×25 mm(L×W×H) |
 Fan Speed (Performance Mode) |  500~1800 RPM±10% |
 Fan Airflow (Performance Mode) |  61.25 CFM |
 Fan Air Pressure (Performance Mode) |  3.76 mmAq |
 Overall Noise (Performance Mode) |  ≤29.3 dB(A) |
 Fan Speed (Quiet Mode) |  500~1450 RPM±10% |
 Fan Airflow (Quiet Mode) |  48.55 CFM |
 Fan Air Pressure (Quiet Mode) |  2.46 mmAq |
 Overall Noise (Quiet Mode) |  ≤22.6 dB(A) |
 Fan Connector |  4-pin PWM |
 Bearing Type |  Fluid Dynamic Bearing |
 Motor Type |  6-Pole Fan Motor |
 Fan Rated Voltage |  12 VDC |
 Fan Rated Current |  0.2 A |
 Fan Power Consumption |  2.4 W |
 Rated Voltage |  12 VDC |
 Power Consumption(Performance Mode) |  3.6 W |
 Power Consumption(Quiet Mode) |  2.4 W |
 Warranty |  6 Years |
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Related Products
- 16.8 M TRUE RGB COLOR
-
RELIABLE HYDRAULIC BEARING
-
EASY TO INSTALL
-
The mounting kit offers hassle-free installation. UX100 includes all-in-one back-plate is compatible with all the latest Intel and AMD CPU socket.
- Intel: LGA 1156/1155/1151/1150/775
AMD: AM4/AM3+/AM3/AM2+/AM2/FM2/FM1 -
SYNC WITH MOTHERBOARD RGB SOFTWARE
-
HIGH VOLUME AIRFLOW DESIGN
Out of stock
Compatible with Intel LGA 115X sockets.
60mm super thin design perfectly fits All-in One systems or limited form factor cases.
Aluminum fins provide excellent heat dissipation.
120mm diameter fan with long life expectancy, durable materials, strong airflow, and low noise output.
Out of stock
- Noctua NH-U14S TR4-SP3 Premium-grade 140mm CPU Air Cooler for AMD sTRX4, TR4, SP3
- Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
- Socket compatibility AMD sTRX4, TR4, SP3
- Fan compatibility 140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
Available on backorder
- Direct Contact Technology: 4 heat pipes with Direct Contact Technology effectively provide excellent heat dissipation.
- PWM Silent Fan: Automatically controls the fan speed according to the temperature of CPU efficiently and decreases fan noise.
- Rainbow Illumination: With a vision of revolutionizing a whole new frontier of cooling performance, we introduce Ant Esports ICE-C612 with Rainbow LED PWM Fan to give you an absolute visual treat.
- Optimized Fin Design: Aluminum Fin Array with Tunnel Effect layout creates micro vortices that boost the airflow and circulate it around the heat pipes.
- High-Performance Heat Pipes: C612 is equipped with four 6mm heat pipes which are a key component for high cooling performance
Out of stock
- Sporting four heatpipes, a surface area of more than 3800cm² and two premium grade 92mm fans, the NH-U9DX i4 provides a significant upgrade in quiet cooling performance compared to common 2U solutions. At the same time, its 125mm height makes it fully compatible with standard 4U cases.
- The award-winning NF-B9 92mm premium fan features Noctua’s renowned SSO bearing as well as advanced aerodynamic optimisations such as Bevelled Blade Tips and Vortex-Control Notches. In order to achieve its superb quiet cooling capability, the NH-U9DX i4 comes equipped with two NF-B9 fans in a push/pull setup.
- The NF-B9 92mm fans supplied with the NH-U9DX i4 support PWM for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1600 to 1300rpm using the supplied Low-Noise Adaptors for even quieter operation.
- Noctua’s SecuFirm2 mounting systems have become synonymous with quality, safety and ease of use. Supporting Intel’s LGA2011 (both Square and Narrow ILM), LGA2066, LGA1356 and LGA1366 Xeon platforms, the SecuFirm2 mounting included with the NH-U9DX i4 guarantees perfect contact pressure and maximum convenience on all sockets.
- Having received more than 100 awards and recommendations from hardware journalists around the world, Noctua’s NT-H1 is a proven professional grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability.
Out of stock
- Having received more than 200 awards and recommendations from leading international hardware websites and magazines, the NH-C14 has become an established reference for 140mm top-flow coolers.
- With its deeper fin stack and more efficient NF-A14 PWM fan, the new S-version provides similar performance and further improved compatibility; Featuring sophisticated aerodynamic optimizations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market; Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14.
- The c-type top-flow design of NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today’s 140mm tower-style cooler but also ensures excellent airflow over RAM modules & near-socket motherboard component.
- Run with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases.
- Run with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height; Compared to the original NH-C14, the layout of NH-C14S has been offset in two axis. Thanks to this measure, the heatsink will clear the top PCIe slot on most ATX and ATX motherboards when the bending of the heat pipes face the PCIe slots or the I/O panel
Available on backorder
- Fanless heatsink for 100% silent cooling through natural convection (see setup guidelines & list of recommended cases) or semi-passive setups with virtually inaudible NF-A12x25 LS-PWM fan (optional)
- 100% RAM compatibility on AMD AM4 and Intel LGA1700/1200, clears the top PCIe slot on most ATX and µATX motherboards
- Professional, Torx-based SecuFirm2+ mounting system for Intel LGA1700, LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156), LGA20xx (LGA2066, LGA2011-0, LGA2011-3) & AMD AM4, AM3(+), AM2(+), FM2(+), FM1
- Further improved second-generation NT-H2 thermal compound for optimal overall cooling performance
- Recommended for CPUs with low to moderate heat dissipation (see CPU compatibility list), e.g. Intel 12900, 12700, 12600 or AMD Ryzen 5600X, 4750G, 4650G, 3400G, etc.
Out of stock
Dual Tower Heatsink with a uniform 6 pipe
Lighting Badge
Easy Mounting System
The new SF120R Fan
Addressable RGB LED Controller
The legendary Hyper air cooler is back and better than before. The Hyper 212 RGB Black Edition offers better installation and great performance, easily one of the best air cooling solutions. The aluminum top cover and nickel plated jet black fins, give the Hyper 212 RGB Black Edition a premium aesthetic appeal. The sleek jet black not only makes it look great, but also increase cooling performance.
- NOCTUA NH-L9i chromax.black CPU Air Cooler
- Material : Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
- Fan compatibility : 92x92x14mm, 92x92x25mm
- Intel LGA1150, LGA1151, LGA1155, LGA1156, LGA1200, AMD AM4 with NM-AM4-L9aL9i
Out of stock
- High Static Pressure Led Fan: Quiet 120 Mm Blue Led Fan (Max 77 Cfm), Straight Touch Technology: 8 Mm Thick Copper Coldplate
- Unique Heatsink Design: Two-Tiered Fin Structure Dissipates Heat Efficiently, While Aluminium Oxide Coating Prevents Oxidation
- Broad Socket Compatibility: Compatibility With The Newest Intel And AMD platforms.
- Fan: 120 mm Blue LED Fan with PWM (800 – 1.900 RPM), Airflow: Max. 77 CFM – Noise: 20.3 – 34.5 dBA
- CPU Support: Intel LGA : 775, 1150, 1151, 1155, 1156, 1366, 2011, AMD: AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+.
Out of stock
- The NH-L9a-AM4 is a highly compact, quiet low-profile cooler designed for use in small form factor cases and HTPC environments
- Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
- Fan compatibility 92x92x14mm, 92x92x25mm
- Low-Noise Adaptor (L.N.A.)
Out of stock
Reviews
There are no reviews yet.