Fractal Design DEFINE 7 XL BLACK TG DARK TINT
₹30,798.31 Original price was: ₹30,798.31.₹24,144.07Current price is: ₹24,144.07.

Features:
Define 7 XL Dark Tempered Glass
The Define 7 XL sets a new standard for what you should expect from a full tower case in terms of modularity, flexibility and ease of use.
- New chassis design opens up to fully expose the case interior
- Anodized aluminum front panel with reversible dual-handed hinges
- Mount up to 18 HDD/SSDs plus five SSDs in the Storage Layout
Plenty of room for massive builds
- Use the Open Layout for more headroom and gargantuan water-cooling with radiators up to 480 mm in front or top and 280 mm in the base
- Spacious, extensively adaptable dual-layout interior easily accommodates large motherboards up to E-ATX and SSI-EEB
- Two 5.25” ODD bays can be converted to an additional front fan mount with filtered louver covering
- Ventilated PSU shroud with two-part removable cover
- Ultra-slim Nexus+ 2 fan hub connects up to three PWM fans and six 3-pin fans
Superlative storage possibilities
- Mount up to 18 HDD/SSDs plus five SSDs in the Storage Layout (6 HDD/SSD trays + 2 SSD brackets + 2 Multibrackets included)
- Detachable PSU cable shield and integrated cable guides with Velcro straps further simplify cable management behind the board
- Sturdy new HDD cage design with vibration damped trays
- 13 pass-through holes with ten rubber grommets and two removable covers make for clean cable routing regardless of motherboard size
Available on backorder
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
Fractal Design DEFINE 7 XL BLACK TG DARK TINT
Airflow and cooling
- Outstanding cooling capacity with a total of 9 x 140 mm or 11 x 120 mm fan mounts and three preinstalled Dynamic X2 GP-14 fans
- Easy-to-clean high airflow nylon filters with full PSU coverage and convenient front access
- The two 5.25″ ODD bays can be converted to an additional front fan mount with filtered louver covering
SPECIFICATIONS:
| Cabinet Size | FULL-TOWER |
| Color | Black |
| Material | Steel, Tempered glass |
| Expansion Slots | 9+3 |
| Motherboard Size | E-ATX,ATX,M-ATX,ITX |
| Max CPU Cooler Height | 185mm |
| Max PSU Length | 250mm |
| Max Gpu Length | 505mm |
| Max 3.5″ HDD | 6 |
| Max 2.5″ SSD | 2 |
| Dust Filters | Top, Front, Bottom |
| Pre Installed Fans | 3 |
| Max Fan Support | 11 |
| Radiator Support | 480mm,420mm,360mm,280mm,240mm,140mm,120mm |
| Front I/O Panel | USB 3.1 Gen 2 Type-C, USB 3.0, USB 2.0, Audio I/O, Power button, Reset button |
| Warranty | 2 Years |
| 5 |
|
0 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
Related Products
- Support for ATX, Micro-ATX, and Mini-ITX motherboards
- Accommodates up to a full-length graphics card
- Support for up to three 3.5″ hard drives and two 2.5″ SSDs for storage
- Built-in three-speed fan controller for optimal cooling
- Cable management system for a clean and organized build
- Transparent side panel to showcase your build
- Front-panel USB 3.0 ports, audio in and out ports, and power and reset buttons
- Dust filter to keep the interior of your case clean
- High-quality steel and plastic construction
- Overall dimensions of 470mm x 215mm x 480mm (LxWxH)
- 7 expansion slots
- Standard ATX power supply support
About this item
- Black, Mid- Tower, 350 x 180 x 410 mm, Metal Left Side Panel
- 6 Expansion Slots, 5 x 3.5” Drive Bay, 5 x 2.5” Drive Bay
- I/O Panel : 2 x USB 2.0, Audio In, 1 x Mic, Reset Button, Power Button
- Fan Support : 2 x 120mm Front and 1 x 120mm Rear
- VGA Card Length : 315 mm ; CPU Cooler Height : 157 mm.
Out of stock
- The striking pinstripe design wraps around the top and front panel and even makes an appearance on the tempered glass side panel
- Addressable LED logo syncs with accommodating motherboards and offers another addressable connector to add more addressable items to your build
- An addressable RGB Controller is provided if your motherboard doesn’t feature an addressable header
- Top PSU chamber removes heat from rear and side exhaust panel and allows for easier cable management
- Tool less and modular features include: tempered glass side panel, drive trays and bottom dust filter. Complementary low-profile GPU bracket to prevent longer cards from sagging
Polygonal Mesh 3D Contour Front Panel
Removable Top Panel
Tempered Glass Side Panel
Dual Sickleflow 120 ARGB Fans
ARGB/PWM Hub
Adaptable Drive Cage
Up to 280mm Radiator Support
Postmodern Elegance
TD300 Mesh brings together modern presentation and performance with its three dimensional artistic mesh front panel. The polygonal diamond-cut facade emphasizes the illumination of two included SickleFlow PWM ARGB fans, cast various glowing effects, shifting based on the viewing angle.
Polygonal Mesh
Crafted with Cooler Master’s FineMesh technology, the polygonal mesh features a three-dimensional contour, capable of simultaneously providing high airflow and excellent dust filtration.
Sickleflow PWM ARGB Fans Included
Pre-installed with two highly acclaimed 120mm ARGB Sickleflow fans, managed by the included Hub to easily customize a comprehensive ARGB lighting system and minimize ARGB port usage on the motherboard.
Removable Top Panel
The top panel is entirely removable for improved access to the components during assembly. Ease of use also facilitates the mounting of cooling solutions such as fans and radiators.
Tempered Glass Side Panel
Hardware, custom-loop cooling, and the pure pride of the builder is shown in panoramic view through an edge-to-edge tempered glass side panel.
Available on backorder
- Steel/Glass ATX Mid-Tower Design
- Extra Durable G2 0.4mm SPCC Structure
- Magnetic Anti-Dust Filter on Top
- G15 Front Panel: Plastic+Metal
- Tempered Glass Left Side Panel
- USB 3.0 for high-speed data
- Fully Optimized Airflow with Advanced Heat Dissipation System
- Dedicated SSD/HDD Bays for Improved Storage & Space Management
- Compatible with all ATX/Micro ATX Motherboards
Out of stock
Prime AP201 white
- Quasi-Filter Mesh Panels: A mesh design comprised of over 57,000 precision-machined 1.5mm holes increases airflow and provides a compelling view of the components within your build.
- Optimized for Cooling: With support for 280 and 360mm radiators and up to six fans, the AP201 is primed to deal with the thermal onslaught of high-performance hardware.
- Industry-Leading Spatial Efficiency: Despite a 33L footprint, the AP201 supports ATX PSUs up to 180 mm long, graphics cards up to 338 mm long, custom liquid cooling, and various storage devices.
- Tool-Free Side Panels: A simple yet secure clip mechanism allows chassis side panels to be easily removed and resistant to accidental dislodging.
- Sizeable Cable-Management: The AP201 features an extended motherboard tray with strategically placed cutouts and a 32 mm gap to tuck cables out of sight.
- Front Panel USB Type-C® Support: The front panel of the AP201 features a USB 3.2 Gen 2 Type-C port, so users can enjoy transfer speeds of up to 10 Gbps.
Available on backorder
Unparalleled Hardware & Cooling Capabilities
Mammoth Water Cooling Support
Exclusive Tool-Less Technology
ARGB Gen2 ready with MasterPlus+ integration
No Limits.
The HAF 700 is capable of housing up to SSI-EEB motherboards (E-ATX), as well as any sized graphics cards in BOTH horizontal and vertical orientations.
Rich Connectivity
The front I/O is designed to maximize the front connectivity for most high end motherboards, featuring four USB Gen 3.1 Type A ports, a USB Gen 3.2 Type C, a 4 pin audio/mic headset jack as well as a dedicated mic jack.
Advanced Mounting Options
The unique removable top panel design allows you to effortlessly install, reach and maintain cooling components such as fans and radiators even in builds with complex custom cooling systems.
Available on backorder
- Compatible with ATX, M-ATX, ITX motherboards
- REV-06W is by far the tallest PC case in the Revolution family
Out of stock
The NX290 mid-tower gaming case effortlessly combines a bevy of in-demand features: USB 3.0 connectivity, ample storage drive bays, room for expansion, and includes 3 x 120mm fixed mode RGB fans in front and 1 x 120mm fan in rear. With support for up to a 360 mm liquid cooling radiator in front, NX290 is easy to build with and easy to cool.
Motherboard support: E-ATX, ATX, Micro-ATX, ITX
2.5″ SSD: 2
3.5″ HDD/2.5″ SSD(convertible): 2/1
Graphics Card Support: Up to 320 mm
CPU Cooler Support: Up to 155 mm
PSU Support: Up to 165 mm (with HDD)Up to 300 mm (without HDD)
Out of stock
MP 520’s asymmetrical front panel design frames the pre-installed three 120mm ARGB fans as unique centerpieces on the build.
Three 120mm ARGB Fans Included
Mesh Geode Front Panel
Versatile Cooling Options
Full Black Coating & PSU Cover
Breathable Power Supply Shroud
About this item
- Black, Mid-Tower, 300 x 190 x 385 mm, Front IO Panel Design
- 4 Expansion Slots, 2 HDD + 4 SSD x 3.5”/ 2.5” Drive Bay
- I/O Panel : 1x USB 3.0, 1 x USB, 1 x HD Audio, 1 x Mic, Power & Reset Button, Processing & Hard Drive Indicators
- Fan Support : 2 x 120mm / 2 x 140mm Front, 1 x 120 mm Rear
- VGA Card Length : 255 mm ; CPU Cooler Height : 160 mm.
Available on backorder
- Dual Chamber Chassis: GT502 internals are divided into two chambers, configuring independent cooling zones for the CPU and GPU
- Panoramic View: Tempered glass panels at the front and side provide a tactfully tinted view of the main chamber and showcase your build
- Front Panel High-Speed USB Type-C: TUF Gaming GT502 front panel features a USB 3.2 Gen 2 Type-C port ripe for transfer speeds up to 10 Gbps
- Tool-Free side panels can be removed simply by pressing a button hidden on the rear of the chassis
- Fully Modular Design: Most of the panels and mounts are removable to ease hardware installation
Available on backorder





















Reviews
There are no reviews yet.