Noctua 60x25m
AAO frame
Noctua’s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua’s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan’s performance/noise efficiency.
Integrated Anti-Vibration Pads
Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.
SSO2 bearing
The NF-A6x25 features the further optimised second generation of Noctua’s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.
Custom-designed PWM IC with SCD
Supporting fully automatic PWM speed control, the NF-A6x25 PWM uses Noctua’s custom-designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. By providing smoother torque impulses, SCD suppresses PWM switching noises and thus makes the fan quieter at low speeds.
Reduced motor hub size
Thanks to its streamlined, compact motor design, the NF-A6x25’s motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the NF-A6x25’s superior airflow and pressure performance.
Flow Acceleration Channels
The NF-A6x25 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex
Stepped Inlet Design
Noctua’s Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.
SSO2 bearing
The NF-A6x25 features the further optimised second generation of Noctua’s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.
Extensive cabling options
The fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second NF-A6x25 PWM fan to the same PWM fan header for automatic control.
Technical Details
| Item Dimensions LxWxH | 6 x 6 x 2.5 Centimeters |
|---|---|
| Brand | Noctua |
| Power Connector Type | 3-Pin |
| Voltage | 12 Volts |
| Cooling Method | Air |
| Noise Level | 19.3 dB |
| Maximum Rotational Speed | 3000 RPM |
| Manufacturer | noctua |
| Item Height | 25 Millimeters |
| Item Width | 6 Centimeters |
| Product Dimensions | 6 x 6 x 2.5 cm; 41 Grams |
| Item model number | NF-A6x25 PWM |
| Are Batteries Included | No |
| Lithium Battery Voltage | 1 Volts |
| Manufacturer | noctua |
| Item Weight | 41 g |
Related Products
Phanteks Metallicgear Skiron 140mm PWM fan
Original price was: ₹761.86.₹422.88Current price is: ₹422.88.
Out of stock
NZXT F140RGB Core – 140mm (White)
Original price was: ₹5,931.36.₹5,338.98Current price is: ₹5,338.98.
Features:
The F Series RGB Core Fans offer brilliant lighting with eight individually addressable RGB LEDs and premium cooling with high static pressure.
- Eight Individually addressable LEDs mounted on the fan hub are perfectly diffused through the semi-translucent blades for a sublime lighting effect.
- A refined hub and blade design offer enhanced static pressure by pushing air through your radiator while providing great airflow. This allows for superior heat dissipation when paired with a liquid cooler or heatsink and used as intake, or exhaust.
- Personalized lighting combinations through NZXT CAM software.
- Seamlessly sync it with all your compatible NZXT lighting accessories.
- The PWM-controlled fan allows speed adjustment, offering the best cooling possible without compromising noise level.
- Fluid Dynamic Bearings deliver high rotational stability while reducing bearing noise and increasing fan lifespan up to 60,000 hours.
- Anti-vibration rubber corners dampen vibration noise at any speed.
- Triple and twin packs include an NZXT RGB Controller with three channels for synchronized lighting control.
Out of stock
NZXT 140mm Quiet Airflow Fans Single Pack (White)
Original price was: ₹1,694.07.₹1,185.59Current price is: ₹1,185.59.
- Nine sickle-style blades are optimized to move large amounts of air, ensuring versatile use for intake or exhaust.
- Minimal gap between blade edges and frame maximizes the spinning area for higher airflow and reduced turbulence.
- Chamfered frame design directs air in a powerful concentrated flow pattern, traveling far into the case to cool vital components.
- Fluid dynamic bearings provide unwavering stability, low-noise operation, and a 60,000-hour lifespan.
- PWM control dynamically adjusts fan speed for higher output or lower noise based on system temperatures for efficient cooling.
- Sturdy frame with rubberized corners absorbs vibrations for low-noise operation, even at high speeds.
Available on backorder
Noctua Fan NF-A14 iPPC-3000 PWM
Original price was: ₹3,050.00.₹2,313.56Current price is: ₹2,313.56.
- Heavy duty cooling fan, 140x140x25 mm, 12V, 4-pin PWM, max. 3000 RPM, max. 41.3 dB(A), >150,000 h MTTF
- Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency
- 12V 3000rpm model (41.3dB) with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 800-3000rpm speed range
- High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection
- Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection
Available on backorder
Arctic P14 PWM PST (Black) – 5 Pack
Original price was: ₹5,931.36.₹2,880.51Current price is: ₹2,880.51.
Optimised for Static Pressure
During the development of the new ARCTIC P14 PWM PST , special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators.
0 dB Mode — Zero rpm
The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.
More Efficient Technology
The motor is powered by a PWM IC of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy without compromising the performance.
Maximum Quietness, Minimum Vibration
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
Extended Life Span
A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we give a manufacturer warranty of 6 years.
Available on backorder
Reviews
There are no reviews yet.