NZXT Chassis H Series H7 v1 Mid Tower Chassis Black
₹15,253.39 Original price was: ₹15,253.39.₹11,449.15Current price is: ₹11,449.15.

- Perforated front & top panels enable maximum thermal performance
- Intuitive cable management system with wide channels, hooks, & straps
- Tool-less access to front & side panels
- Front & top support radiators up to 360mm
- Includes two F Series Quiet 120mm Fans
- Supports vertical GPU mounting (Sold Separately)
- Three color options (Matte Black, Matte White, White & Black)
- Two top-mounted USB 3.2 Type-A ports
- One top-mounted USB 3.2 Type-C port
Out of stock
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
NZXT Chassis H Series H7 v1 Mid Tower Chassis
This mid-tower case is ready to bring the cool. Featuring a perforated front and top panel, alongside widened channels, hooks, straps, and toolless entry, this sleek case will keep any build cool and comfortable while offering plenty of space.
Specification:
Key Specs | |
Motherboard Support | Mini-ITX, Micro-ATX, ATX, and EATX (Up to 272mm) |
Enclosure Type | Mid-Tower |
Case Material | SGCC Steel, Tempered Glass |
Drive Bays | |
2.5″ | 4+2 |
3.5″ | 2 |
Dimensions | |
Height | 505mm (With Feet) |
Width | 230mm |
Depth | 480mm |
Weight | 10.05 kg |
Fan Support | |
Front | 3 x 120mm / 3 x 140mm |
Top | 3 x 120mm / 2 x 140mm |
Rear | 1 x 120mm / 1 x 140mm |
Filters | All Air Intakes |
Model Number | CM-H71FB-01 (Black) |
Compatibility & Clearance | |
Max CPU Cooler Clearance | Up to 185mm |
Max GPU Clearance | Up to 400mm |
Front Radiator Clearance | 60mm |
Top Radiator Clearance | 30mm |
Cable Management | 18-22mm |
Radiator Support | |
Front | Up to 360mm with Push/Pull |
Top | Up to 360mm |
Rear | Up to 140mm |
Front I/O Ports | |
USB 3.2 Gen 1 Type-A | 2 |
USB 3.2 Gen 2 Type-C | 1 |
Headset Audio Jack | 1 |
Fan Specs | |
Model | F120Q (Case Version) |
Speed | 1200 ± 240RPM |
Airflow | 62.18 CFM |
Static | 1.05 mm – H2O |
Noise | 25.1 dBA |
Fan Connector | 3-pin |
Expansion Slots | |
Standard | 7 |
Vertical | 0 |
Warranty | 2 Years |
Note | *** Features, Price, Specifications are subject to change without notice. |
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Related Products
Clean interior –PSU Cover & HDDs. Tempered Glass window. Unique exterior design with integrated D-RGB Lighting. Integrated PSU cover Fully Equipped with Magnetic Dust Filter. Long GPU Support (380mm/15in). Full Size PSU support. Equipped with 1x Phanteks 120mm Fans. Front I/O (2x USB 3.0, Headphone, Mic, D-RGB LED SW) Integrated D-RGB Illumination modes + sync with D-RGB (addressable) motherboards/Phanteks D-RGB products. Optimized high-airflow design 2x Front Loaded 3.5″ HDD. Supports up to 240/280mm radiator in front. 3x SSD mounting location (2x bracket included) Motherboard Support: ATX, uATX, mITX, (E-ATX* – up to 285mm wide). Front I/O: 2x USB 3.0, Mic, Headphone, D-RGB LED SW. Side Window: Yes, Tempered Glass.
Out of stock
Compact Mid-Tower with Lighting and Fan Control
- We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-speed USB 3.1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H510i.
- The new Smart Device V2 includes a faster microprocessor for NZXT CAM-powered control of two HUE 2 RGB lighting channels and three fan channels that support either voltage regulated or PWM fans.
- With a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC
- The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.
- Use the intuitive NZXT CAM application to monitor and control your build, choosing from presets or custom controls for your RGB lighting and fans to create your dream PC.
- Cable management can often take more time than assembly. We designed a cable routing kit with pre-installed channels and straps, for intuitive and easy wiring.
- Two Aer F120mm fans* are included for optimal internal airflow and the front panel and PSU intakes include removable filters. Includes a removable bracket designed for radiators up to 280mm simplifies the installation of either closed-loop or custom-loop water cooling.
*Case version fans and specs vary from retail version - Show off your graphic card with a built-in mounting bracket for installing your GPU vertically.
*PCIe riser card not included.
Out of stock
- CAM-powered Smart Device to simplify installation and manage use of RGB lighting and fans
- Premium, all-steel construction with the sleek H Series design; available in four color combinations
- Tempered glass panel showcases custom RGB lighting along with the vertical GPU mount
- System installation and expansion made easy with all-new cable management system
- Water-cooling installation simplified for both AIO and custom loop
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort
Out of stock
- Light up the system: 3 Pre-installed 120mm 5V MB Sync ARGB fans (Sync with Asus, Gigabyte, MSI) +1 rear black fan
- Built-in dual-mode 5V ARGB switch board: control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard
- 27 LED modes through I/O port button: wave mode; flow mode; RGB lighting (single color); Radar mode (Red, yellow, green, Cyan, blue, White, Purple); breath mode (8 Colors); full lighted mode; single color mode (7 Colors); light off
- Clear view of PC gaming: two 4mm tempered glass (left & Front) with standard mounting
- Built-in PSU cover: Cover all your cables for a professional look
- 6 Drive Bays: 2. 5” Ssd x 6 or 2. 5” X 4 + 3. 5” X 2
- Supports Mini ITX, Micro ATX, and ATX motherboard
Out of stock
- The H400 showcases the signature design first introduced with the H-Series. The elegant all-steel construction embeds the iconic cable management system that streamlines building and upgrading your system. You can easily build a powerful system with plenty of options for storage and cooling. Includes three integrated Aer F fans* and a tempered glass panel to showcase your build.
- Premium, all-steel construction with the sleek H-series design; available in four color combinations
- Tempered glass panel showcases your build with crisp clarity
- System installation and expansion made easy with all-new cable management system
- Water-cooling installation simplified for both AIO and custom loop
Out of stock
- Clearance for top 240mm dual radiator for water cooling solutions.
- Adjustable interior pivot 120mm/140mm fan slot for directional air flow.
- Removable HDD cage to allow more room for extended video cards.
- Innovative right mounted HDD rails for easy hard drive replacement.
- Single 120mm/140mm side fan with acrylic window for interior viewing and cooling.
- Front Internal 2x USB 3.0 headers, 2x USB 2.0, audio and microphone input.
- 30W 3-step fan control for setting up your system for silence or performance.
- Wire management support up to 25mm space for easy cable management.
- Screw-less 5.25” and HDD trays that secures 2.5” SSD.
- Cooling capability of up to eight fans (2x 120mm and 1x 140mm LED fan included).
Out of stock
P/N |
CA-1G2-00M1WN-00 |
Case Type |
Mid Tower |
Dimension (H x W x D) |
490 x 197 x 463mm(19.3 x 7.8 x 18.2 inch) |
Net Weight |
4.6 kg / 10.1 lb |
Side Panel |
Transparent Window |
Color |
Exterior & Interior : Black |
Material |
SPCC |
Cooling System |
Rear (exhaust) :120 x 120 x 25 mm fan (1000rpm, 16dBA) |
Drive Bays |
1 x 5.25’’, 1 x 3.5”– Accessible : 3 x 3.5’’ or 2.5’’ (With HDD Tay)– Hidden : 1 x 2.5’’ (Without HDD Tay) |
Expansion Slots |
7 |
Motherboards |
6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) |
I/O Port |
USB 3.0 x 1,USB 2.0 x 2, HD Audio x 1 |
PSU |
Standard PS2 PSU (optional) |
Fan Support |
Front: 2 x 120mmTop: 2 x 120mmRear: 1 x 120mm |
Radiator Support |
Top: 1 x 240mmRear: 1 x 120mm |
Clearance |
CPU Cooler Height Limitation:160mmVGA Length Limitation:250mm (with HDD cage)360mm (without HDD cage)PSU length limitation:200mm |
Out of stock
- LIGHT UP THE SYSTEM – 3 pre-installed 120mm 5V MB Sync ARGB Fans (Sync with ASUS, Gigabyte, MSI, AsRock) +1 Rear Black Fan
- BUILT-IN DUAL-MODE 5V RGB Switch Board – Control Light via I/O Port Button (27 LED Modes/7 Colors) or via 5V RGB Sync Motherboard
- 27 LED MODES THROUGH I/O PORT BUTTON – Wave Mode; Flow Mode; RGB Lighting (Single Color); Radar Mode (Red, Yellow, Green, Cyan, Blue, White, Purple); Breath Mode (8 Colors); Full Lighted Mode; Single Color Mode (7 Colors); Light Off
- CLEAR VIEW OF PC GAMING – One 3mm Tempered Glass with standard mounting
- BUILT-IN PSU COVER – Plenty of ventilation holes to keep your PSU cool and to provides a better cable management
- DRIVE BAYS – 2. 5” SSD x 5 OR 3. 5” x 3
- Supports Mini ITX, Micro ATX, and ATX Motherboard
Out of stock
Item Specifics
- SERIESCORE
- TYPEMID TOWER
- 5.25″ BAYSNA
- 3.5″ BAYS2
- 2.5″ BAYS4
- EXPANSION SLOTS7
- MAX RADIATOR SUPPORT360
- MAX FAN SUPPORT6
- COLORBLACK
- SIDE PANELTRANSPARENT
- SUPPORTED GPU-37816.1
Out of stock
- Designed to be noticed: Metal front panel with custom TUF Gaming spatter pattern, and 4mm-thick, smoked, tempered-glass side panel to showcase your build’s internals.
- Mobile battle station: Ergonomic, woven-cotton carry handles enable easy and safe transport up to 30Kg.
- Efficient cooling: Equipped with three 120mm Aura Sync RGB-illuminated fans and one 140mm rear PWM fan, plus up to seven fan-mounting points for targeted airflow.
- Space reserved for both front- and top-mounted 360mm water-cooling radiators plus a 140mm radiator at the rear.
- Perfect for TUF Gaming motherboards: Fan and cable placement optimized for TUF Gaming gear, and ready for perfect cooling control via our Fan Xpert 4 software.
Available on backorder
- The H200 TG RGB is designed for PC builders who want a clean and sleek look but crave for good cooling performance and tempered glass at the same time. The H200 TG RGB is a standard mid-tower chassis with motherboard support up to ATX. It comes with one preinstalled standard 120mm fan, and an RGB button that can switch between 19 lighting modes. Brining you an exteriorly simple look and internally sophisticated design.
- With an unique RGB light bar, the front panel of H200 TG RGB presents a smooth and elegant style. Built-in PSU Cover Comes with a full-length PSU cover with a ventilated design to enhance the airflow and hide those unsightly cables.
- Tempered Glass Window The tempered-glass hinge door is designed with a smart lock security system which secures the inner components of your case. H200 TG RGB is built to be more durable, scratch resistant and, of course, easy-to-use.
- Superior Hardware Support The H200 TG RGB has outstanding expandability with support for a tower CPU cooler with maximum height 180mm, a dual VGA expansion slot of up to 320mm in length, and a power supply with length of up to 160mm (with 3.5” HDD Drive installed) and up to 220mm otherwise.
- Excellent Cooling Capability Optimized for excellent cooling capability with one 120mm fan preinstalled. The case is able to house up to dual 140mm or three 120mm front fans, up to 2x 140mm fans on top, and a radiator size up to 240mm on top to allow users to build a desired high-end system.
Out of stock
- Light up the system: 3 Pre-installed 120 millimeter 12V motherboard Sync RGB fans (Sync with as US, Gigabyte, MSI, as rock, and BIOSTAR 12V header Mob) + 1 Black fan at the back
- Built-in dual-mode 12V Sync controller: Control light via I/O port RGB Light button (16 LED modes/7 Color) or via 12V header RGB sync motherboard (Sync with as US, Gigabyte, MSI, as rock, and BIOSTAR 12V header Mob)
- 16 LED modes through I/O port RGB Light button: RGB mode, single color mode (7 Colors), breath mode (7 Colors), light off 7 Colors: red, yellow, green, cyan, blue, White, Purple]
- A clear view of PC gaming: 4 millimeter thick Tempered Glass Side panel with standard mounting
- Built-in PSU cover: Cover all your cables for a professional look combined with a window to show off your colorful power
- Drive Bays: 3 x 2.5 inches + 2 x 3.5 inches
- Supports Mini ITX, Micro ATX, and ATX motherboard
Out of stock
Reviews
There are no reviews yet.