- *** Forbidden. Fraud prevention. Sender blacklisted. Anti-Spam by CleanTalk. ***
NZXT CHASSIS H Series H9 Flow Edition ATX Mid Tower Chassis Black
₹17,795.76 ₹13,644.07

- Unique uninterrupted glass panel for a clear view of the interior
- Intuitive cable management and dual chamber design
- Room for ten fans or three 360mm Radiators
- Perforated top panel for enhanced cooling
- Direct airflow to the GPU for handling high-powered components
- Enhanced experience with other products from the NZXT ecosystem
- Includes four F Series 120mm Quiet Airflow fans
Available on backorder
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
NZXT CHASSIS H Series H9 Flow Edition ATX
The H9 Flow is designed to cool off powerful GPUs with its expansive thermal capabilities, featuring the capacity for ten fans and numerous 360mm radiator mounting options and the perforated top panel takes cooling even further.
Specifications:
 Key Specs | |
Motherboard Support | Mini-ITX, Micro-ATX, ATX |
Enclosure Type | Mid-Tower |
Case Material | SGCC Steel, Tempered Glass |
 Fan Support | |
Side | 3 x 120mm |
Top | 3 x 120mm / 2 x 140mm |
Bottom | 3 x 120mm / 2 x 140mm |
Rear | 1 x 120mm |
Filters | All Air Intakes |
 Dimensions | |
Height | 495mm (With Feet) |
Width | 290mm |
Depth | 466mm |
Weight | 12.1 kg |
 Radiator Support | |
Side | Up to 360mm with Push/Pull |
Top | Up to 360mm |
Bottom | Up to 360mm |
Rear | Up to 120mm |
 Compatibility & Clearance | |
Max CPU Cooler Clearance | Up to 165mm |
Max GPU Clearance | Up to 435mm |
PSU Clearance | 200mm |
Cable Management | 91mm |
 Fan Specs | |
Model | F120Q (Case Version) |
Speed | 1200 ± 240RPM |
Airflow | 62.18 CFM |
Static | 1.05 mm – H2O |
Noise | 25.1 dBA |
Fan Connector | 3-pin |
 Expansion Slots | |
Standard | 7 |
Vertical | 0 |
 Drive Bays | |
2.5″ | 4+2 |
3.5″ | 2 |
Warranty | 2 Years |
Note | *** Features, Price, Specifications are subject to change without notice. |
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Related Products
- Fractal Design Node 202 Black Computer Cabinet comes with highly versatile case that can be set up both vertically and horizontally. The sleek design makes it very attractive next to the TV or on your desk.
- The internal layout of the Node 202 keeps the hot components separate and has them all placed in proximity of free-flow air so the case will run cool despite not having any extra case fans. This small footprint is an intelligently built unit where extreme detail was placed into the design phase to get every line and spec in perfect harmony.
- Provided with a smart thermal interior design separating motherboard and graphics card chambers. Strategically placed air filters for a dust free interior. Strategically placed air filters helps to enhance the durability of your hardware by providing dust free interior.
- Built to provide storage for 2.5-inch SSD, SFX PSUs up to 130 mm, graphics cards up to 310mm, CPU cooler up to 56mm and supports two fans (2x 120 mm in graphics card chamber). Equipped with 2x USB 3.0, Audio in/out, Power button with LED and 2 expansion slots.
- The Node 202 is the ultimate PC case for those looking for a beautifully designed, compact chassis that can house a capable gaming build. Compatible with Mini ITX motherboard.
Out of stock
Era is a unique and elegantly understated feat of both design and technical engineering — a compact chassis free from the excessive restrictions traditionally associated with small form factor systems.
- • Compact, uniquely designed aluminum exterior available in five colors
- • Stylish color-coordinated top panel
- • Supports dual slot graphics cards up to 295 mm in length
Out of stock
- Fractal Design Era ITX Gaming Cabinet comes with pre-installed 80mm SSR3 fans for maximum airflow and heat dissipation. Construced to support up to Five fan positions with intuitive layout and clear airflow paths for massive cooling.
- Designed with titnted tempered glass at Top which add stylish looks and offers a direct view of the inner system. The magnetic top panel and tool-less latching side panels make for near effortless maintenance with maximum durability. Equipped with Easy-to-clean high airflow nylon filters with full PSU coverage and convenient front access.
- Built for Flexible storage options which two included storage brackets each support a single 3.5-inch HDD or two 2.5-inch SSDs. Adjustable brackets offers total flexibility with PSU mounting height and allows dual slot graphics cards up to 295mm in length.
- Provided with removable radiator bracket allows 240mm or dual 120mm radiators for robust liquid cooling. Equipped with 1x USB 3.1 Gen 2 Type-C, 2x USB 3.0, 3.5mm CTIA combined audio/mic at the front side.
- Compact yet spacious interior fits for ITX Motherboards and supports ATX, SFX-L, SFX power supply type.
Available on backorder
- New features: Front I/O USB Type-C Port and Tempered glass side panel with single screw installation
- Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive
- STREAMLINED COOLING: 2 Aer F120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removable bracket designed for radiators up to 240mm – simplifies the installation of either closed-loop or custom-loop water cooling
Out of stock
- The MasterBox NR600 is a pure and simple design that is focused on airflow performance, a single-layer, fine mesh makes up the entire front panel
- The tempered glass side panel sits completely flush against the chassis, mounted securely and discreetly by a system of tabs and thumbscrews
- The single 4 pole headset jack features both audio and microphone capabilities simultaneously so that separate jacks are not needed
- Fan support- front: 140mm x2 / 120mm x3,top: 140mm x2 / 120mm x2, rear: 120mm x1
- Radiator support -front:360/280/240/140/120mm,top: 120/240mm, rear: 120mm
Out of stock
- NEW FEATURES: Front I/O USB Type-C Port, Tempered glass side panel with single screw installation, and upgraded Smart Device V2
- SMART DEVICE V2: Includes a faster microprocessor for NZXT CAM-powered control of two HUE 2 RGB lighting channels and three fan channels that support either voltage regulated or PWM fans.
- POWERED BY NZXT CAM: Use the intuitive NZXT CAM application to monitor and control your build, choosing from presets or custom controls for your RGB lighting and fans to create your dream PC
- MOTHERBOARD SUPPORT: Mini-ITX
The pre-installed, pre-routed power supply and CPU-cooler allows for ease of building and optimal cable & tubing management. Install a motherboard, HDDs and finish off with a GPU: no hassle, no routing. Stow away excess cables and you’re good to go.
The NR200P MAX thermal and power delivery solutions are specifically tuned to ensure compatibility with any high-end system a user can dream of. Being only 18 liters in volume, the NR200P MAX is design to simultaneously satisfy power, performance, and minimal footprint.
NR200P MAX offers users multiple options to customize the appearance and performance of the system. The included ventilated steel panel is ideal for keeping power hungry builds cool and running efficiently, while the edge-to-edge tempered glass panel provides a premium aesthetic.
Available on backorder
- The H200i showcases NZXT’s vision for modern PC building. This premium mini-ITX case features a unique CAM-powered Smart Device that digitally drives RGB lighting and fan performance. You can effortlessly control RGB lighting and fans, while Adaptive Noise Reduction optimizes your build’s acoustics through machine learning and ideal fan settings. Includes two integrated Aer F fans and a RGB LED strip to enhance the aesthetics of your build as seen through the H200i’s stunning tempered glass panel.
- CAM-powered Smart Device to simplify installation and manage use of RGB lighting and fans.
- Premium, all-steel construction with the sleek H-series design; available in four color combinations.
- Tempered glass panel showcases custom RGB lighting.
- System installation and expansion made easy with all-new cable management system.
- Water-cooling installation simplified for both AIO and custom loop.
- Adaptive Noise Reduction optimizes cooling and noise balance for best gaming comfort.
Out of stock
- Realize the Unrestricted Cooling Potential with the NR200, house up to 7 fans in total for every cooling configuration imaginable.
- The compact structure of NR200 can efficiently house CPU coolers up to 155mm in height and radiators up to 280mm in length, so even the hottest running hardware can’t be held back.
- Triple slot GPUs are supported with a maximum length of 330mm and maximum width of 156mm allowing the fitment of high-end graphics cards.
- By adhering to Tool Less ideology, all external panels and top mounted fans in NR200 are secured with pins for easy removal, facilitating quick access to the internals.
- Two liquid cooling pump locations alongside side and bottom radiator mounting locations allow for powerful custom water-cooled builds inside a compact enclosure.
- Compatible with Mini-ITX and Mini DTX. The PSU can be front mounted for extra motherboard clearance with a maximum size of 244 x 226 mm.
Out of stock
- We’ve made our iconic H Series PC cases even better. Our new lineup still features the elements builders loved in the original H Series, including our patented cable management system, removable fan/radiator mounting brackets, and easy-to-use drive trays, alongside new updates like a front-panel USB-C connector supporting high-speed USB 3.1 Gen 2 devices, a tempered glass side panel that installs with a single thumbscrew, and an upgraded Smart Device V2 on the H210i.
- The new Smart Device V2 includes a faster microprocessor for NZXT CAM-powered control of two HUE 2 RGB lighting channels and three fan channels that support either voltage regulated or PWM fans.
- With a USB 3.1 Gen2-compatible USB-C connector on the front panel, it’s easier than ever to connect smartphones, high-speed external storage, or the latest peripherals to your PC.
- The clean, modern design, iconic cable management bar, and uninterrupted tempered-glass side panel showcase your stunning build.
- Use the intuitive NZXT CAM application to monitor and control your build, choosing from presets or custom controls for your RGB lighting and fans to create your dream PC.
- Cable management can often take more time than assembly. We designed a cable routing kit with pre-installed channels and straps, for intuitive and easy wiring.
- Two Aer F120mm fans* are included for optimal internal airflow and the front panel and PSU intakes include removable filters. Includes a removeable bracket designed for radiators up to 240mm simplifies the installation of either closed-loop or custom-loop water cooling.
- Tempered glass or Vented Panel: The NR200P comes with the choice of a vented steel side panel for unrestricted airflow, or a crystal-clear tempered glass side panel to reveal the beauty of a computing beast.
- Unrestricted Cooling Potential: Holds up to 7 fans. 5 sides of open ventilation. Fits CPU coolers up to 155mm tall or up to 280mm long radiators.
- Full-size GPU Fitment with Vertical Mounting: Up to 330mm long triple-slot GPU support. PCI Riser included for a stylish vertical mount option.
- 360 Degree Accessibility: Every panel and frame part can be dismantled to allow advanced disassembly and 360 degrees of access to work on components.
- High-quality Materials: Thick, powder coated SGCC steel lasts the life time of the chassis and resists marring from transport or handling.
- Custom Cooling Support: Two liquid cooling pump locations alongside side and bottom radiator mounting locations allow for powerful, custom water-cooled builds inside a compact enclosure.
- Easy, Tool-free access: All external panels, including the tempered glass and top-mounted fans, are secured with pins for easy removal, facilitating quick access to the internals without the use of tools.
Available on backorder
- Polygonal Mesh – Fine Polygonal Mesh features a three-dimensional contour and is also capable of simultaneously providing high airflow and dust filtration.
- Crystalline Tempered Glass – A crystalline design spans the edges of the tempered glass side panel, precision engineered for strength as well as aesthetics.
- Triple ARGB Fans – Three addressable RGB fans flood the Polygonal Mesh front panel with lighting while providing considerable airflow to the system.
- Dual 360mm Radiator Support – For enthusiast-grade cooling, two 360mm radiators are supported on the top and front panel to keep the most extreme systems cool.
- Room For Upgrades – Support for up to a 410mm graphics card, a 165mm CPU cooler, and up to a 180mm PSU in length provides room for upgrades to stay ahead of the game.
- Motherboard Compatibility – Mini-ITX, Micro-ATX, ATX,
Available on backorder
Reviews
There are no reviews yet.