DEEPCOOL AG620 ARGB WH
₹6,100.85 ₹3,939.83
Features:
The DeepCool AG620 ARGB is a dual-tower 120mm CPU cooler that boasts impressive 260W cooling power performance that’s been stripped down and optimized for terrific efficiency throughout.
SUBSTANTIAL COOLING POWER
Keep things cool with up to 260W of heat dissipation power to ensure your system is performing at its peak without a sweat.
BALANCED BIDIRECTIONAL HEAT PIPE TECHNOLOGY
By optimizing the internal capillary structure and injecting a precise amount of liquid, the heat pipe achieves the best heat dissipation performance regardless of whether the cooler is in a vertical or horizontal case. This perfect ratio facilitates a highly efficient phase change throughout the heat pipe and achieves lower thermal resistance over a wide TDP range.
HIGH EFFICIENCY FANS
Find your optimal balance with automatic PWM support for full performance under load to silent efficiency at idle.
Available on backorder
- Size Guide
Size Guide
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips 2XS 32 26 32 XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 All measurements are in INCHES
and may vary a half inch in either direction.
Size Chest Waist Hips XS 34 28 34 S 36 30 36 M 38 32 38 L 40 34 40 XL 42 36 42 2XL 44 38 44 All measurements are in INCHES
and may vary a half inch in either direction.
- Delivery & ReturnGoods once sold will not be taken back or exchanged. Once invoice made cannot be modified or cancelled for any reasons thereof. The item is tested for physical damage at the point of sale and the company is not liable for the physical damage of item any more. It is also the duty of the buyer to immediately check at the counter physical condition of the purchased goods. All goods are consigned at buyer’s risk and the company is not responsible for any loss, damage or pilferage in transit. Our responsibility ceases the moment goods leaves our warehouse.
Physical damage / Mishandling of product/Tampering of warranty stickers –do not cover warranty. All Products sold by us require technically qualified PC hardware engineer for installation.
Price, specifications and terms of offers are subject to change without notice. PCB WORLD TECH is not responsible for typographical and/or photographical errors. Retail products are accompanied by the original manufacturer warranty. PCB WORLD TECH does not offer any technical support or sales advice. Physical damage to any product purchased at PCB WORLD TECH will effectively void warranty coverage. Improper Installation of CPU fans and/or improper clocking may cause CPUs to chip. CPUs that are chipped, burnt or have bent pins are considered physically damaged and cannot be returned for replacement. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage. As a result, PCB WORLD TECH will return any physically damaged Products back to the customer at the customer’s expense. You can expect your order to be processed within approximately 24-48 hours, provided the items are in stock and there are no problems with payment verification. Although PCB WORLD TECH does not guarantee same day-shipping we shall strive to do so wherever possible. Orders are not processed on weekends and holidays.
DEEPCOOL AG620 ARGB WH
Specification:
Model | R-AG620-WHANMN-G-2 |
Application For |
|
Product Dimensions | 129×136×157 mm |
Heatsink Dimensions | 127×110×157 mm |
Net Weight | 1300 g |
Heatpipe | Ø6 mm×6 pcs |
Fan Dimensions | 120×120×25 mm |
Fan Speed | 300~1850 RPM±10% |
Fan Airflow | 67.88 CFM |
Fan Air Pressure | 2.04 mmAq |
Fan Noise | ≤29.4 dB(A) |
Fan Connector | 4-pin PWM |
Fan Rated Voltage | 12 VDC |
Fan Rated Current | 0.14 A |
Fan Power Consumption | 1.68 W |
LED Type | Addressable RGB LED |
LED Connector | 3-pin(+5V-D-G) |
LED Rated Voltage | 5 VDC |
LED Power Consumption | 1.05 W |
Bearing Type | Hydro Bearing |
Warranty | 1 Year |
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Related Products
- Having received more than 200 awards and recommendations from leading international hardware websites and magazines, the NH-C14 has become an established reference for 140mm top-flow coolers.
- With its deeper fin stack and more efficient NF-A14 PWM fan, the new S-version provides similar performance and further improved compatibility; Featuring sophisticated aerodynamic optimizations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market; Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14.
- The c-type top-flow design of NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today’s 140mm tower-style cooler but also ensures excellent airflow over RAM modules & near-socket motherboard component.
- Run with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases.
- Run with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height; Compared to the original NH-C14, the layout of NH-C14S has been offset in two axis. Thanks to this measure, the heatsink will clear the top PCIe slot on most ATX and ATX motherboards when the bending of the heat pipes face the PCIe slots or the I/O panel
Available on backorder
Buckle installation, easy to install and remove; applies for both Intel and AMD systems
Quick disassembling fan stand, easy to install and disassemble
high performance, provide high airflow with low sound
Large aluminum fin tower to increase the cooling performance
Direct contact to heat pipes for continuous contact between CPU and cooler
Available on backorder
- A perfect combination of RGB fan and gaming style heatsink.
- *RGB lighting system controlled by RGB SYNC motherboard software.
- Unique black top-cover designed for gaming sense only.
- Optimized mounting kit with enhanced backplate and clips for easy installation and improved durability.
- Solid 0.4-mm fins & 4 heatpipes for highly efficient heat transfer.
- 120 mm RGB fan with vibration-eliminating rubber pad and PWM for low-noise operations.
- Attention:this function is ONLY applied for RGB Header on Motherboard which owns RGB SYNC function.
Out of stock
- Sporting four heatpipes, a surface area of more than 3800cm² and two premium grade 92mm fans, the NH-U9DX i4 provides a significant upgrade in quiet cooling performance compared to common 2U solutions. At the same time, its 125mm height makes it fully compatible with standard 4U cases.
- The award-winning NF-B9 92mm premium fan features Noctua’s renowned SSO bearing as well as advanced aerodynamic optimisations such as Bevelled Blade Tips and Vortex-Control Notches. In order to achieve its superb quiet cooling capability, the NH-U9DX i4 comes equipped with two NF-B9 fans in a push/pull setup.
- The NF-B9 92mm fans supplied with the NH-U9DX i4 support PWM for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1600 to 1300rpm using the supplied Low-Noise Adaptors for even quieter operation.
- Noctua’s SecuFirm2 mounting systems have become synonymous with quality, safety and ease of use. Supporting Intel’s LGA2011 (both Square and Narrow ILM), LGA2066, LGA1356 and LGA1366 Xeon platforms, the SecuFirm2 mounting included with the NH-U9DX i4 guarantees perfect contact pressure and maximum convenience on all sockets.
- Having received more than 100 awards and recommendations from hardware journalists around the world, Noctua’s NT-H1 is a proven professional grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability.
Out of stock
- Noctua NH-U14S TR4-SP3 Premium-grade 140mm CPU Air Cooler for AMD sTRX4, TR4, SP3
- Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
- Socket compatibility AMD sTRX4, TR4, SP3
- Fan compatibility 140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
Available on backorder
- Rotational Speed : 2500 RPM I Socket Compatibility : Intel Xeon LGA3647
- Bearing : SSO2 I Acoustical noise : 30,6 dB(A)
- Input power : 1,68 W I Voltage range : 12 V
- Material : Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
- 6 Year Warranty
Out of stock
- Radiator for Intel Socket LGA 775, 1150, 1151, 1155, 1156, 1366.
- Supports AMD Socket FM1, FM2, AM3+, AM3, AM2+, AM3+.
- It has a 4Pin Temperature Controller.CPU Radiator equipped with high-performance Heat Pipes.
- Radiator with Seamless heat pipe fitting technology.
- Three years warranty by Antec.
Available on backorder
New Generation Dual Chamber Pump
Enlarged Surface Area on Radiator
New SickleFlow 120 ARGB
Reinforced Sealing for Anti-Leaking Prevention
Out of stock
Compatible with Intel LGA 115X sockets.
60mm super thin design perfectly fits All-in One systems or limited form factor cases.
Aluminum fins provide excellent heat dissipation.
120mm diameter fan with long life expectancy, durable materials, strong airflow, and low noise output.
Out of stock
THE AIR COOLER FOR THE 32-CORE
RYZEN THREADRIPPER 2990WX
 Advanced silence and performance
ï¿ Reroute design on heat-pipe Ø6mm x 2pcs to directly receiving cold air, providing the best cooling performance
ï¿ Staggered heat-pipe arrangement helps to maximize airflow over each heat-pipe for optimal cooling performance
ï¿ Includes compact 92mm blue LED fan
ï¿ Universal Socket Compatibility Intel Socket 775/115X/1200/1366 & AMD Socket AM4/AM3/AM2/FM2/FM1
Out of stock
Four direct contact heat pipes for continuous contact between CPU and cooler
Upgradable to dual fans with quick snap fan bracket
Wide-range PWM fan with unique blade design and red LEDs
Versatile all-in-one mounting solution for Intel and AMD sockets
Optimized bracket design for easy installation
Reviews
There are no reviews yet.